A splitter prevents kickback by keeping wood separated from the blade. That’s its main job, and it’s a critical one for anyone using a table saw splitter. Without it, your workpiece can pinch the blade and shoot back at you with scary force. You don’t want that. It’s a simple device, but it makes a huge difference in safety and control.
So why should you care about the splitter on your saw? Becuase it’s not just a accessory—it’s your first line of defense. When you’re making rip cuts, the wood naturally wants to close up behind the blade. A good splitter stops that from happening. It keeps your project moving smoothly and you’re hands safe. We’ll look at what makes one better than another.
Product Comparison Table: 10 Best Table Saw Splitter
| Image | Why We Like This Product | Editor’s Rating | |
 |
MICROJIG GRR-RIPPER 2GO Push Block for Routers, Jointers, Band…
|
9.6 |
Read Review |
 |
Beaiguna Featherboards for Table Saw, Featherboard Table Saw Safety…
|
9.4 |
Read Review |
 |
MICROJIG GRR-RIPPER MJ SPLITTER Steel Pro, Full Kerf, Safety…
|
9.2 |
Read Review |
 |
MICROJIG MJ SPLITTER Steel Pro, Table Saw Splitter Safety…
|
8.9 |
Read Review |
 |
089240015076 N409059 Table Saw Riving Knife fit – by…
|
8.7 |
Read Review |
 |
MICROJIG MJ Splitter Thin Kerf Table Saw Safety Tool…
|
8.5 |
Read Review |
 |
MICROJIG GRR-RIPPER SP-0125 Mj Splitter For 1/8″ Kerf Saw…
|
8.3 |
Read Review |
 |
MICROJIG Steel Pro Thin Kerf Splitter Kit & Extra…
|
8.0 |
Read Review |
 |
MICROJIG Steel Pro Full Kerf Splitter Kit & Extra…
|
7.8 |
Read Review |
 |
MICROJIG GRR-RIPPER MAX 3D Pushblock for Woodworking Safety and…
|
7.6 |
Read Review |
Quick Review For Top 10 Table Saw Splitter
MICROJIG GRR-RIPPER 2GO Push Block for Routers, Jointers, Band and Table Saws, Woodworking Tool, Extreme Grip, GR2-GO, Yellow/Green
The MICROJIG GRR-RIPPER 2GO Push Block is a woodworking tool built for safety and precision. It works on routers, jointers, band saws, and table saws. The design focuses on grip, control, and kickback prevention. If you need to make accurate cuts, this push block gives you a reliable way to feed stock through your machines.
The Green GRIP non-slip surface provides strong gripping power. You can hold onto workpieces with confidence, even when feeding them against a spinning blade.
This makes it a dependable table saw push block for everyday use. The grip stays effective on woods with different finishes, so you don’t have to worry about slipping during a critical cut.
Kickback is a real danger in the shop. The GRR-RIPPER 2GO helps prevent it with a precision leg and tunnel system. This system feeds and controls both sides of the cut at the same time. By keeping the workpiece stable, it virtually eliminates kickback.
You get superior control without having to force the material through. That means safer operation and less stress.
This push block is not just for table saws. It works well on router tables, jointers, and band saws too. The ergonomic handle design fits your hand comfortably, reducing fatigue during long sessions. It pairs nicely with other table saw accessories and router table accessories for precise control.
Beaiguna Featherboards for Table Saw, Featherboard Table Saw Safety Accessories to Reduce Kickback for Woodworking, Upgrade EVA Table Saw Featherboard for Table Saw, Band Saws and Router Tables
The Beaiguna Featherboards for Table Saw is a safety accessory designed to help you work with more control and less risk. It focuses on reducing kickback, which is one of the more dangerous things that can happen when running wood through a table saw. This model uses an advanced EVA material and a reinforced hinge construction. That combination does a better job holding your workpiece in place compared to the older plastic or wooden featherboards.
It keeps the board pressed firmly against the fence, so the blade is less likely to grab and throw the wood back at you. Precision is another key point. The EVA feathers on this featherboard create a larger contact area with your wood. This helps your material slide smoothly across the table without the big swings you sometimes get with plastic feathers. Because the workpiece stays in consistent contact with the blade, you get cleaner cuts on hardwood, composite materials, and even thin veneers.
It also helps reduce vibration and deformation of the wood, which means less damage to both your finished piece and your cutting tools. You will find this featherboard easy to reposition. It has T-track compatibility and an ergonomic knob clamp that lets you move it in under ten seconds. It works with T-tracks from 1/4 inch to 3/4 inch, so just double-check your tool’s specs before you buy.
MICROJIG GRR-RIPPER MJ SPLITTER Steel Pro, Full Kerf, Safety Upgrade for Older Table Saws, Woodworking Tools and Accessories, Anti-Kickback, SP-2, Blue
The MICROJIG GRR-RIPPER MJ SPLITTER Steel Pro, Full Kerf, Safety Upgrade for Older Table Saws, Woodworking Tools and Accessories, Anti-Kickback, SP-2, Blue is a system designed to make your table saw cuts safer and more consistent. It is a direct upgrade for older saws that lack a modern riving knife. The main goal here is to reduce kickback and burning. When you feed stock through the blade, this splitter keeps the material aligned with your fence.
It prevents the blade from pinching the wood, which is the main cause of dangerous kickbacks. You get cleaner cuts with less friction, so burning becomes a thing of the past. The system comes with four precision steel-core splitters. Each one has a different offset: 0.000”, 0.003”, 0.006”, and 0.009”. You can choose the splitter that matches your blade’s exact alignment. This is important because even a tiny misalignment can cause binding.
Thes splitters are designed specifically for full kerf blades. They are not for thin kerf blades, so make sure you have a standard full kerf setup. You also get four Kerf Keepers included. These cover a kerf range of 0.118” to 0.145”. They serve a critical safety function. If the stock closes on the blade during a cut, the Kerf Keeper automatically ejects. This prevents the wood from binding against the splitter, which reduces the risk of kickback.
MICROJIG MJ SPLITTER Steel Pro, Table Saw Splitter Safety System for Thin Kerf Blades, Woodworking Accessories for Cabinet Making and Furniture Building, SP-2TK
The MICROJIG MJ SPLITTER Steel Pro is a table saw splitter safety system designed specifically for thin kerf blades. It is a woodworking accessory aimed at cabinet making and furniture building. This kit comes with everything you need to get started. You get four MJ Splitter thin kerfs, four Kerf Keepers, a precision drill guide, a 3/16″ drill bit, and the necessary screws.
The whole setup installs into a zero clearance insert to create a reliable splitter system.
This product is built to help reduce kickback and burning. The splitter sits behind your blade to keep the kerf open and the workpiece tight against the fence. It helps reduce pinching when you are ripping soft or hard woods. Less pinching means a lower risk of kickback, which is a major safety concern.
The design keeps your cuts controlled and smoother.
One of the best features is the adjustable splitters for a better fit. Each of the four splitters has built-in offsets to match your specific blade kerf. You set up a dual splitter configuration to keep the cut open for smoother ripping. This makes it a smart addition to any woodworking table saw setup. The installation is made easier with the precision alignment tool.
089240015076 N409059 Table Saw Riving Knife fit – by BERPSE – Compatible with Ridgid RTS11 RTS12 RTS22 RTS23 Table Saw – Black
The BERPSE N409059 Table Saw Riving Knife is a replacement part designed to bring safety and accuracy back to your saw. This is a single, black riving knife. It is not a full blade guard assembly, just the metal riving knife itself. The part numbers for this item are 89240015076, 089240015076, and N409059. These numbers help you confirm you are looking at the correct piece.
You should check your specific saw model before you order.
This knife is listed as compatible with several Ridgid table saws, including the RTS11, RTS12, RTS22, and RTS23 models. If you own one of those saws, this part is likely the right fit. The listing also mentions compatibility with a series of other tools. These are models like the DCG414T2 Type 1, DCG414T2 Type 2, DCG414T2-AR Type 2, DCG414T2-B2 Type 2, DCG414T1 Type 1, DCG414T1 Type 2, DCG414T2-B3 Type 1, DCG414T2-B3 Type 2, DCG414T2-BR Type 2, DCG414B Type 1, and DCG414B Type 2.
Please double-check that these model numbers match your equipment. It is always a good idea to compare the shape and mounting hole pattern of your old knife with this one to be sure.
A riving knife is a key safety feature on a table saw. It moves up and down with the blade. Its job is to prevent the wood from pinching the back of the blade after you make a cut. This helps stop dangerous kickback.
MICROJIG MJ Splitter Thin Kerf Table Saw Safety Tool for Kickback Prevention, Riving Knife Alternative, Zero Clearance Insert Accessory, Made in USA, SP-0100TK
The MICROJIG MJ Splitter Thin Kerf Table Saw Safety Tool, model SP-0100TK, is a practical add-on for your table saw if you value both safety and clean results. It works as an alternative to a traditional riving knife and pairs with a zero clearance insert.
This splitter is built for thin kerf blades, specifically the 3/32 inch size. It’s main job is to stop kickback. When you rip hardwoods, the wood can pinch the back of the blade and shoot back at you. That is dangerous.
The splitter keeps the kerf open behind the blade. This prevents that pinching from happening, which makes your ripping safer right away.
It also helps you get cleaner edges on your wood. The tool includes mini-featherboard technology. This means it applies a constant lateral pressure against your fence. It creates a featherboard effect without needing a seperate clamp. The wood travels smoother, and you get less burning on the workpiece.
You can saw that difference in the finish.
Setting it up is simple. You mount it directly onto a wood or plastic zero clearance throat plate. The package comes with a drill guide to help with placement. It makes upgrading your saw easy, no complex modifications needed. You can install it and get back to your project quickly.
During long rips in hardwood or plywood, internal wood tension can close the kerf on the blade. This tool has patented Kerp Keepers that hold the cut open.
MICROJIG GRR-RIPPER SP-0125 Mj Splitter For 1/8" Kerf Saw Blades By Table Saw Safety Splitter System, Multi-Colored
The MICROJIG GRR-RIPPER SP-0125 Mj Splitter For 1/8″ Kerf Saw Blades is a specialized safety add-on designed for your table saw. If you use thin-kerf blades, this is the original aftermarket splitter that helps prevent kickback, one of the most dangerous events in woodworking.
It works by keeping the cut kerf open behind the blade, so your workpiece doesn’t pinch the blade and get thrown back at you.
This splitter installs directly into your zero clearance insert, also know as a throatplate. It works with phenolic, wood, or plastic inserts. You don’t need to modify your saw’s riving knife or splitter assembly. The installation is straightforward.
The package includes simple instructions and a drill guide to help you position the splitter corectly in your custom insert. You drill a hole, slide the splitter in, and tighten a set screw. Thats it.
One of the standout features is the built-in mini-featherboard technology. This small plastic piece presses the workpiece against the fence as you cut. It does two things at once. First, it keeps your cut straight and accurate.
MICROJIG Steel Pro Thin Kerf Splitter Kit & Extra Steel Splitter Inserts – Premium Table Saw Splitter Accessory for Thin Kerf 10” Blades | Prevent Kickback & Binding | Table Saw Safety, SP-2TK+SP-P3
The MICROJIG Steel Pro Thin Kerf Splitter Kit & Extra Steel Splitter Inserts is a table saw safety accessory designed for thin kerf 10-inch blades. It focuses on preventing kickback and binding, two of the most common and dangerous issues when ripping wood. The product is a direct approach to making your cuts safer and more controlled.
Kickback happens when the wood pinches the back of the blade and gets thrown back at you. This kit stops that.
It uses a dual splitter design that keeps the kerf open behind the blade. The splitters are made with a tough ABS Polymer shell and a solid stainless steel core. This combination is built to handle hardwoods without bending or breaking. The kit is specifically for making 90-degree cuts only, and it works with blades that have a kerf range of 0.090 to 0.118 inches.
Installation is straight forward.
The kit includes a precision drill guide that helps you set it up on your zero clearance insert. This guide ensures the splitter lines up perfectly with your blade every time, so you don’t have to guess or measure repeatedly. You get four SteelPro splitters and four Kerf Keepers in the package. The splitters have “+” markings on them, which lets you fine-tune the width for a precise fit.
MICROJIG Steel Pro Full Kerf Splitter Kit & Extra Steel Splitter Inserts – Premium Table Saw Splitter Accessory for Full Kerf Blades | Prevent Kickback & Binding | Table Saw Safety, SP-2+SP-P3
The MICROJIG Steel Pro Full Kerf Splitter Kit & Extra Steel Splitter Inserts – Premium Table Saw Splitter Accessory for Full Kerf Blades | Prevent Kickback & Binding | Table Saw Safety, SP-2+SP-P3 is a straightforward tool designed to make your table saw safer and more accurate. If you work with solid woods and want to reduce the risk of kickback, this kit gives you a reliable solution.
Installation is simple.
The kit includes a precision drill guide that helps you set up the splitter on your Zero Clearance insert. You don’t need to guess or measure multiple times. The guide ensures your alignment is perfect from the start. Just follow the steps, and you are ready to cut.
This splitter is built tough. It uses a 100% polycarbonate shell with a solid stainless steel core. That means it can handle dense hardwoods without bending or breaking.
The polycarbonate shell is strong, but the steel core gives it extra rigidity. You can push through tough material without worrying about the splitter failing. It is desinged to last through heavy use.
Safety is a big focus here. The kit uses an innovative Dual Splitter approach. Two splitters work together to keep the kerf open behind the blade. This prevents the wood from pinching the blade, which is the main cause of kickback.
MICROJIG GRR-RIPPER MAX 3D Pushblock for Woodworking Safety and Splitter SteelPro Thin Kerf Kit, Includes Accessories, for Routers, Jointers, Band and Table Saws
The MICROJIG GRR-RIPPER MAX 3D Pushblock with the Splitter SteelPro Thin Kerf Kit is a serious piece of woodworking safety equipment. It is built to give you total control over your material, no matter what machine you are using.
This pushblock works by applying triple-directional force. That means you get downward, inward, and forward pressure all at once. This design helps to virtually eliminate kickback. You get total stability on every cut.
It makes your projects safer and more precise. You dont have to fight the wood to keep it on track.
A key part of this system is the integrated SafeRIP Kit. This feature is designed to help prevent accidental blade contact. It includes precise leg settings that make your setup faster and safer. You can change the legs to match the thickness of your material.
This keeps your fingers away from danger while you work.
This kit also comes with every GRR-RIPPER accessory that Microjig offers. It is an all-inclusive set. You get the 1/8″ Legs for precision ripping. There is a Handle Bridge and a Stabilizing Plate. The kit also includes an Adjustable Spacer, a Deflector/Connector, and Gravity Heels. You have everything you need right out of the box.
Table Saw Splitter Buying Guide
A table saw splitter prevents kickback and keeps cuts clean. You probably know that moment when wood pinches the blade and the saw tries to throw it back at you. Scary stuff. A good splitter rides behind the blade, holding the kerf open so the wood can’t trap the blade. It’s a small part that makes a huge difference in safety. But not all splitters are the same, so you need to know what to look for.
Material and Durability
Most splitters are made from steel or aluminum. Steel is tough but heavy, and it can rust if you don’t keep it oiled. Aluminum is lighter and resists rust, but it bends easier if you hit it by accident. Which one fits your shop? If you move your splitter around a lot, go with aluminum. If you want something that will last decades, steel might be your pick. Just check the thickness—thin metal can flex during a cut, which defeats the purpouse.
Height and Adjustability
Your splitter needs to match the blade height you actually use. Some splitters sit too low and don’t support the wood all the way through the cut. Others stick up to high and get in the way of your riving knife or guard. Look for a splitter with at least an inch of vertical adjustment. That way you can set it just below the blade’s teeth, but high enough to guide the wood. A fixed-height model is cheaper, but you’ll regret it when you switch blade sizes.
Compatibility With Your Saw
Not every splitter fits every table saw. Some bolt directly to the arbor assembly, others attach to the trunnion or the throat plate. Measure your saw’s mounting points before you buy anything. Also check if the splitter works with a dado blade—many don’t. If you do lots of grooves, you need a model that can be removed quickly or one that sits far enough back. Nothing worse than buying a splitter that clamps onto your saw but wobbles during use.
Frequently Asked Questions About Table Saw Splitter
What is a table saw splitter and why do I need one?
A table saw splitter is a metal plate that sits behind the saw blade. It helps prevent kickback by keeping the wood from pinching the blade. You need one for safer cuts. It’s a key safety feature.
Does my table saw already have a splitter?
Most modern table saws come with a splitter. But some older models or cheap ones might not. Check your saw’s manual. If it’s missing, you should buy one. It’s easy to add.
What’s the difference between a splitter and a riving knife?
A splitter is fixed in place. It doesn’t move with the blade. A riving knife moves up and down with the blade. Riving knives are more convenient for dado cuts. But splitters are simpler and cheaper. Both reduce kickback.
Can I use a table saw without a splitter?
You can, but it’s not smart. Without a splitter, the wood can pinch the blade. That causes kickback. Kickback is dangerous. It can throw wood at you. Always use a splitter for rip cuts.
How do I install a table saw splitter?
First, unplug the saw. Remove the blade guard or insert. Slide the splitter into the slot behind the blade. Tighten it with a screw or bolt. Make sure it’s aligned. Check the instructions for your saw. It’s usually a quick job.
Will a splitter work with a thin-kerf blade?
Yes, but you might need an adapter. Thin-kerf blades cut a narrower kerf. Some splitters come with spacers. If not, you can buy a thin-kerf splitter. It will fit better and work safely.
How do I know if my splitter is aligned?
Check that the splitter is directly behind the blade. It should be centered. Use a straightedge. If it’s off, wood can bind. Loosen the screws and adjust. Tighten and test again.
Can a splitter be removed for dado cuts?
Yes, you can remove it. But you must reattach it after. Dado blades are wider. A splitter won’t work with them. Some saws have a quick-release feature. Always put it back for regular cuts.
What to Remember
Your safety comes first every time you make a cut. A good splitter keeps your workpiece stable and stops dangerous kickback. You don’t need to worry about wood pinching behind teh blade. This simple tool makes a huge difference in how safe your workshop feels. It also helps you get straight, clean cuts without extra effort. When you set up your saw correctly, you can focus on your project instead of watching for hazards. That peace of mind is worth the small investment.
Pick a table saw splitter that fits your saw model and matches your typical work. It should be easy to adjust and stay in place during use. Look for one that sits just behind the blade without getting in the way of your cuts. A sturdy splitter lasts for years and keeps you safe on every job. Remember to check it often for wear or damage. With the right tool, your table saw becomes a more reliable partner in your shop. You can work faster and with more confidence knowing kickback is no longer a worry.