You know that moment when a cut goes sideways and your hand gets too close to the blade? It’s terrifying. That’s why table saw push blocks are non-negotiable safety gear. They’re simple tools, but they make a huge difference. A good push block gives you control while keeping your fingers far away from danger. And honestly, once you start using one, you’ll wonder how you ever worked without it. It’s like having a extra hand on the job—one that doesn’t flinch.
But not all push blocks are created equal. Some feel cheap and slip right off the wood. Others grip tight and feel like they were made just for you. That’s what we’re here to figure out. We’ve tested the top ones on the market so you don’t have to. Whether you’re a weekend warrior or a pro, the right push block saves time and keeps you safe. Let’s break down the best options and find the one that fits your hands and your workflow.
Product Comparison Table: 10 Best Table Saw Push Blocks
| Image | Why We Like This Product | Editor’s Rating | |
 |
GRR-RIPPER+ by Microjig. Includes SafeRip Kit. Fully Adjustable 3D…
|
9.5 |
Read Review |
 |
MICROJIG GRR-RIPPER GR-100 3D Table Saw Pushblock, Yellow
|
9.3 |
Read Review |
 |
POWERTEC Push Block and Push Stick Set Fits Table…
|
9.2 |
Read Review |
 |
Zebekk Push Block for Table Saws, Router Tables, Band…
|
9.0 |
Read Review |
 |
MICROJIG GRR-RIPPER 2GO Push Block for Routers, Jointers, Band…
|
8.8 |
Read Review |
 |
Milescraft 3406 GrabberPRO – Push block for Table Saws,…
|
8.7 |
Read Review |
 |
POWERTEC Deluxe Push Stick Fits Table Saws, Router Tables,…
|
8.5 |
Read Review |
 |
POWERTEC Deluxe Push Stick for Table Saw, Router Table,…
|
8.3 |
Read Review |
 |
POWERTEC Push Stick & Push Block, L& Magnetic Push…
|
8.2 |
Read Review |
 |
Push Block for Table Saw Safety Pusher Block Woodworking…
|
8.0 |
Read Review |
Quick Review For Top 10 Table Saw Push Blocks
GRR-RIPPER+ by Microjig. Includes SafeRip Kit. Fully Adjustable 3D Push Block for Table Saws, Router Tables, Band Saws, and Jointers. (SKU: GR-100+) Yellow/Green
The GRR-RIPPER+ by Microjig is a fully adjustable 3D push block designed for table saws, router tables, band saws, and jointers. It comes with the enhanced SafeRip Kit included, and it is built to keep your hands safe while giving you total control over your material.
You already know the danger zone near a spinning blade. This tool changes that. The push block applies powerful downward, inward, and forward pressure all at once. That pressure virtually eliminates kickback.
It also prevents material burn because you keep the workpiece flat and steady through the whole cut. You are not just pushing from behind; you are holding the material down and against the fence at the same time.
The key is the proprietary Green GRR-RIP material. It gives you a superior grip on everything from hardwoods to plywoods to slick plastics. Even if your hands are sweaty or the wood has a tricky grain, you stay confident.
The grip is backed by an exclusive limited lifetime warranty. If there is a manufacturer defect, Microjig replaces it for the life of the product. That is a solid promise.
With the new SafeRip Kit, you get precise material handling that prevents accidental blade contact. This makes for faster and cleaner cuts. You can rip material down to just 1/4 inch by 1/4 inch on a table saw with surgical accuracy.
MICROJIG GRR-RIPPER GR-100 3D Table Saw Pushblock, Yellow
The MICROJIG GRR-RIPPER GR-100 3D Table Saw Pushblock, Yellow is built to keep your hands safe and give you total control. It protects your fingers and stops kickback like nothing else on the market. This is not just a push stick. It is a system that holds your workpiece firmly from three directions, giving you complete command of the cut.
The key is the powerful high-friction durable grip. It grabs your stock with extreme hold, so there is no slipping or wandering.
You can make precision cuts down to 1/4 inch ripping. That is very thin stock that would be dangerous with a standard push block. The GRR-RIPPER makes it safe and easy.
It is fully adjustable for easy handling. You can set it up for different thicknesses and widths in seconds. No tools needed. Just twist and lock. This means you can switch from a thick board to a thin strip with out any hassle. It works on your table saw, router table, jointer, and band saw.
One tool does it all.
The 3-directional force is the real secret. It pushes down, forward, and against the fence at the same time. This keeps the workpiece flat and tight agianst the fence. It completely eliminates the chance of kickback. You are in control the entire time. Your hands stay well away from the blade, even on narrow cuts.
This is a true MICROJIG innovation. It was designed in the USA with real shop safety in mind.
POWERTEC Push Block and Push Stick Set Fits Table Saws, Router Tables, Band Saws & Jointers, Dual Ergonomic Handles w/Max Grip, Wood Pusher Reduces Kickback & Increases Safety. 5PK (71009V)
The POWERTEC Push Block and Push Stick Set 5PK (71009V) is a complete safety kit for your shop. It fits table saws, router tables, band saws, and jointers. This set gives you five pieces to help you control wood and reduce kickback. You get one long hold down push block, one Safe V stick, one straight push stick, and two short hold down push blocks. Each tool has a specific job to make your work safer.
The push blocks are designed to give you extra hand safety while guiding wood.
They let you apply firm, steady downward pressure on the workpiece. This stops the wood from bouncing or chattering as it crosses the cutter blades. The blocks feel solid and stable in your hand. You can use them for face jointing, ripping plywood, routing, and other woodworking tasks. The short blocks are great for tighter spots, and the long block gives you more reach when needed.
The push sticks offer a different kind of control.
The L-shaped stick, also called a V push stick, lets you push the whole workpiece through the blades. It is narrow, so it works well with smaller stock. The straight push stick is perfect when you have limited space around the blade. Both sticks keep your hands away from danger. They are commonly used with jointers, table saws, router tables, and shapers. You can switch between them depending on the job.
The grip is a standout feature.
Zebekk Push Block for Table Saws, Router Tables, Band Saws & Jointers – Cuts Safe – Easy to Assembly
The Zebekk Push Block for Table Saws, Router Tables, Band Saws and Jointers is a simple tool designed to make your workshop time safer and more controlled. It focuses on one main thing: keeping your hands away from the blade while you work. If you have ever felt nervous making narrow rip cuts on a table saw, this push block is made for exactly that situation.
The bottom of the block uses a non-slip material that gives you a strong grip on the workpiece.
This is not just about holding the wood still. It also helps prevent kickback, which is one of the most dangerous things that can happen when cutting. The design uses multidirectional force, so you can control the workpiece from different angles without losing stability. Your hands stay behind the block, well away from the blade path. It makes narrow rip cuts down to 1/4 inch much less stressful.
Assembly is about as easy as it gets. There is no frustrating work required.
You just install the handle and the side parts, and you are ready to go. It takes maybe a minute. The top part has a sliding adjustment design that lets you control the cutting width easily. You can dial in the exact width you need without guessing or fiddling with complicated settings.
This push block works on a variety of machines. It is compatable with table saws, router tables, jointers, and band saws. It should fit most tool accessories you already have in your shop.
MICROJIG GRR-RIPPER 2GO Push Block for Routers, Jointers, Band and Table Saws, Woodworking Tool, Extreme Grip, GR2-GO, Yellow/Green
The MICROJIG GRR-RIPPER 2GO Push Block is a woodworking tool designed to give you strong grip and control while you work. Made in the USA, it features a Green GRIP non-slip surface that holds onto your workpiece firmly. This makes it a dependable push block for table saws and other machines. You get accurate cuts because the material stays put, not slipping around in your hands.
It is a essential tool for anyone who values safety and precision in the shop.
Kickback is a real danger with power tools, but this push block helps prevent it. The design includes a precision leg and tunnel system. This system feeds and controls both sides of the cut at the same time. By doing that, it virtually eliminates kickback while giving you superior control. You can feed wood through the blade with confidence, knowing the block is keeping everything stable and on track.
It makes risky operations feel much safer.
This is a multipurpose woodworking tool. You can use it on table saws, router tables, jointers, and band saws. The high-visibility yellow and green colors make it easy to spot on your workbench. The ergonomic handle design fits your hand comfortably, reducing fatigue during long sessions. It works well with other table saw accessories and router table accessories for even more precise control.
Milescraft 3406 GrabberPRO – Push block for Table Saws, Router Tables, Band Saws & Jointers
The Milescraft 3406 GrabberPRO is a push block designed for table saws, router tables, band saws, and jointers. It helps you keep your hands away from the blade while you work. This tool is all about giving you more control and safety during your cuts. One of the main benefits is woodworking safety. The GrabberPRO helps reduce kickback by maintaining contact on both sides of the blade as you pass over your cut. This keeps the workpiece stable and prevents it from lifting or twisting.
That means you can focus on the cut itself, not on worrying about a sudden, dangerous reaction from the material. It is also fully adjustable. The tool comes with four sets of interchangeable legs: 1 inch, 1/2 inch, 1/4 inch, and 1/8 inch. You can swap these out to suit the thickness of the material you are cutting. This flexibility means the push block fits the job, not the other way around.
Whether you are working with thick hardwood or a thin veneer, you can dial in the right setup for a secure grip. For accurate rips, the GrabberPRO really shines. You can cut clean, precise strips as small as 1/8 inch thick. This is handy when you need thin pieces for inlays, edging, or small projects. The block gives you the stability to make these narrow cuts without the workpiece slipping or chattering. The handle design helps maintain maximum contact on the workpiece.
POWERTEC Deluxe Push Stick Fits Table Saws, Router Tables, Band Saws & Jointers. Ergonomic Handles Safety Push Tool for Wood working and Hand Protection. 2PK (71511)
The POWERTEC Deluxe Push Stick Fits Table Saws, Router Tables, Band Saws & Jointers (2PK – 71511) gives you two different tools for keeping your hands away from spinning blades. One is a magnetic type push stick that measures 11-21/32 inches long with a notch width of 9/16 inch. The other is an L-shaped push stick that is 8-21/32 inches by 5-15/16 inches, and it has a pad width of 35/64 inch.
Together, they cover most situations you run into in the workshop.
The main job here is hand protection. These sticks let you push your workpiece through the saw blade or cutting head while keeping your fingers at a safe distance. You get good control over the stock movement, so the piece doesn’t slip or kick back. This is important when you are working with smaller pieces that get close to the blade.
You can use these push sticks with a lot of different machines.
They work with table saws, radial arm saws, bandsaws, shapers, router tables, and jointers. So if you have a few different tools in your shop, one set covers them all. The design includes cleats, notches, and nonslip surfaces that grip the wood tightly. This helps you keep steady pressure during the cut.
Construction is built for long-term durability. The makers know that ocasional contact with the blade can happen. So they made these tools tough enough to handle it.
POWERTEC Deluxe Push Stick for Table Saw, Router Table, Band Saw & Jointer, Dual Ergonomic Handles w/Max Grip, Safety Push Tool for Wood working and Hand Protection 2PK (71338)
The POWERTEC Deluxe Push Stick for Table Saw, Router Table, Band Saw & Jointer, Dual Ergonomic Handles w/Max Grip, Safety Push Tool for Wood working and Hand Protection 2PK (71338) comes with two deluxe L-shaped push sticks right out of the box. These are not your basic shop accessories. They are built to keep your hands safe while you guide wood through a saw or cutter. The main job here is hand protection.
You push the whole workpiece down flat with one stick, keeping your fingers far from the blade. That single motion makes a big difference when you are working fast or handling tricky cuts.
These push sticks are made for a few different machines. You can use them on your table saw, router table, band saw, or jointer. Some people also call them V push sticks because of the shape. They work well with shapers too.
So if you have a mix of tools in your shop, these will fit right in without any trouble. The craftsmanship is solid. They are built to last a long time. The design includes extended heels, extra padding, and added ribs for more structure. This part is actually patented, which means someone put real thought into making them stronger than a typical push stick.
You get a deluxe grip with these handles.
POWERTEC Push Stick & Push Block, L& Magnetic Push Stick Set Fits Table Saw, Router Table, Band Saw & Jointer, Ergonomic Handles w/Max Grip, Pusher Reduces Kickback & Increases Safety. 5PK (71510)
The POWERTEC Push Stick & Push Block, L & Magnetic Push Stick Set (model 71510) is a five-piece safety kit designed for your table saw, router table, band saw, and jointer. It gives you a few different tools to keep your hands away from the blade while still having good control over your wood.
This set includes one deluxe magnetic push stick, one L-shaped push stick, two standard push blocks, and one dual handle push block. That is five tools total.
The magnetic push stick is handy because it sticks right to your saw’s metal surface, so you always know where it is. The L-shaped stick works well for pushing the entire workpiece through the blade, especially on a jointer or table saw. The standard straight stick is better when you have limited space, like routing small stock.
The push blocks serve a specific purpose. They let you apply firm, steady downward pressure on the workpiece as it crosses the cutter.
This reduces bounce and chatter, making the cut smoother and safer. The blocks are great for face jointing, ripping plywood, and general routing. The sticks, on the other hand, are narrower and designed for pushing smaller pieces through the cut. Both tools work together to reduce the risk of kickback.
Each tool in this set has an ergonomic handle with a max grip surface. The handles feel natural in your hand, which makes them easy to hold onto even when you are working for a while.
Push Block for Table Saw Safety Pusher Block Woodworking Accessories Pusher Safe and Stable for table saw Router table Jointer Band Adjustable
The “Generic Push Block for Table Saw Safety Pusher Block Woodworking Accessories” is designed to keep your hands away from the blade. It’s a simple tool, but it makes a big difference in how you work with wood. You can use it on a table saw, router table, jointer, or band saw. That makes it a versatile piece for your workshop.
One of the best things about this pusher is how it adjusts. The height and bottom width slide freely. This means you can set it up for different sizes of wood.
It also has a clever design that stops the screws from falling out. You wont have to hunt for lost parts on the floor. That’s a small detail, but it saves time and frustration.
Safety is the main point here. The shape of the pusher keeps your fingers away from the blade. It uses a non-slip material that gives you a firm grip. Your hands stay stable, even when you are pushing a large piece of wood. This reduces the chance of accidents a lot.
You can focus on the cut instead of worrying about your fingers.
The bottom of the tool has a high-friction surface. It grabs the wood and stops it from slipping sideways. This gives you better control, especially with bigger boards. The handle is shaped to fit your hand comfortably. It does not tire you out as quickly. So if you are working on a long project or a quick task, your hands will feel less strain.
Table Saw Push Blocks Buying Guide
Maintain control and safety with ergonomic push blocks for small pieces. You already know table saw kickback is dangerous, but managing narrow offcuts can feel like a balancing act. A good push block keeps your fingers far from teh blade while giving you the grip you need. It’s a small investment that makes a big difference in your workshop routine. Let’s look at what matters when you pick one.
Grip Material and Handle Design
The handle should fit your hand like it was made for you. Rubber overmolding provides a non-slip surface, even when your palms get sweaty. Some blocks have a single vertical handle, others offer a pistol-grip style. Which feels more natural? Try imagining pushing a board through a cut. If the handle forces your wrist into an awkward angle, you’ll lose control fast. Look for designs that keep your wrist straight and your grip secure.
Base Pad Firmness
Not all rubber bases are the same. A pad that is too soft will squish under pressure, making it hard to apply steady force. A pad that is too hard might slide on the wood. The sweet spot is a medium-durability rubber that grips the workpiece without bouncing. Some blocks use replaceable pads, which is nice if you wear them down over time. Check the pad’s texture too—fine grooves often grip better than smooth surfaces.
Board Height Clearance
Your push block needs room to move above the blade guard. If the block is too tall, it might hit the guard or the riving knife. Measure the gap between your blade guard and the table surface. Many blocks are about 2 to 3 inches high, which works for most saws. But if you have a low-profile guard, you might need a shorter block. Don’t guess here—a quick measurement saves frustration.
Price vs. Durability
Cheap plastic blocks can crack after a few months of use. Spend a little more for reinforced nylon or aluminum bodies. You don’t need the most expensive option, but avoid the ultra-budget ones. A mid-range block around $20 to $30 usually offers good balance of grip, comfort, and long life. Remember, your safety gear shouldn’t feel flimsy in your hands.
Frequently Asked Questions About Table Saw Push Blocks
Do I really need a push block for my table saw?
Yes, you should use one. A push block keeps your hands away from the blade. It gives you more control over the wood. It also helps prevent kickback. Think of it as a safety tool that every woodworker needs.
What’s the difference between a push block and a push stick?
A push block is wider and has a handle on top. You use it to push wood flat against the fence. A push stick is longer and narrower. It’s better for thin rips or pushing wood through the blade. Most people prefer push blocks for general work.
What materials are push blocks made from?
Most are made of plastic or wood. Plastic blocks are easy to clean and last long. Wooden blocks give you a better grip. Some have rubber padding on the bottom. This helps hold the wood steady. Choose what feels comfortable in you hand.
Should I buy one push block or a set?
A set is often a good idea. You get different sizes for different tasks. A small block works for narrow boards. A larger one handles wide panels. Many sets include a push stick too. You’ll have more options for safety.
How do I use a push block correctly?
Place it firmly on the wood. Keep your hand on the handle. Push the wood forward with steady pressure. Don’t let your hand go past the blade. Always use the push block for the last few inches of the cut. This keeps your fingers safe.
Can I make my own push block?
Yes, you can. Many woodworkers build them from scrap wood. You just need a handle and a base. Add some grip tape for traction. But store-bought ones are tested for safety. If you’re new, buying one might be easier.
How do I clean and maintain push blocks?
Wipe them down after use. Remove sawdust and resin. Use a damp cloth for plastic blocks. Sand wooden ones if thay get rough. Check the padding often. Replace it if it wears out. A clean block works better and lasts longer.
Are all push blocks the same size?
No, they come in various sizes. Standard ones are about 6 inches long. Smaller ones are for thin stock. Larger ones are for wide boards. Pick a size that matches your common projects. You can always buy more later.
In Summary
Choosing the right push block is about keeping your hands safe and your cuts clean. You don’t need fancy gear to get the job done. A simple, well-designed block gives you control and confidence. Look for one that fits your hand comfortably and has a solid grip on the wood. Plastic or rubber? It just depends on what feels best for you. The goal is to push the board through the blade without slipping. That’s really all it comes down to. A good push block makes the saw easier and more enjoyable to use. It’s one of those small tools that makes a big difference in your workshop safety.
Whether you’re ripping long boards or trimming small pieces, having a reliable tool is key. A well made table saw push blocks keeps your fingers away from the blade while giving you the leverage you need. It’s a simple trade— a few dollars for a lot of peace of mind. So take a look at your options, pick one that feels right, and get back to making sawdust with confidence. Your hands will thank you.