Swap to a carbide-tipped blade for clean cuts in aluminum and thin steel. If you’ve been struggling with melted edges or broken teeth, your current setup is the problem. A good table saw metal cutting blade changes everything. It lets you slice through non-ferrous metals without burning the material or dulling after a single use. You don’t need a special saw—just the right blade.
This upgrade saves you time and frustration. No more slowing down to avoid chip-out or stopping to swap blades constantly. Your table saw becomes a multi-material workhorse. It’s a simple switch that makes metal cutting feel almost as easy as cutting wood. Trust me, once you try it, you’ll wonder why you waited.
Product Comparison Table: 10 Best Table Saw Metal Cutting Blade
| Image | Why We Like This Product | Editor’s Rating | |
 |
Evolution Power Tools, Professional Blade for Cutting Mild Steel…
|
9.7 |
Read Review |
 |
DEWALT 14″ Chop Saw Blade, Metal Cut-Off Wheel (DW8001)
|
9.5 |
Read Review |
 |
TOMAX 10-Inch 80 Tooth TCG Aluminum and Non-Ferrous Metal…
|
9.2 |
Read Review |
 |
TWIN-TOWN 10-Inch 52 Teeth Dry Cut Steel and Ferrous…
|
9.0 |
Read Review |
 |
TOYAKI 10-Inch Miter Saw Blade, TCG Aluminum Working 120-Tooth…
|
8.8 |
Read Review |
 |
CMT 256.050.10 ITK Xtreme Industrial Combination Saw Blade, 10-Inch…
|
8.5 |
Read Review |
 |
IVY Classic 40088 Swift Cut 10-Inch x 3/32-Inch x…
|
8.3 |
Read Review |
 |
DEWALT Circular Saw Blade, 7 1/4 Inch, 16 Tooth,…
|
8.1 |
Read Review |
 |
FOXBC 7-1/4 inch Circular Saw Blade Metal and Stainless…
|
7.8 |
Read Review |
 |
FOXBC 10-Inch Saw Blade 100-Tooth TCG for Aluminum and…
|
7.6 |
Read Review |
Quick Review For Top 10 Table Saw Metal Cutting Blade
Evolution Power Tools, Professional Blade for Cutting Mild Steel and Ferrous Metal, TCT Saw Blade 10 Inch, Wen, Table Saw Accessories, 52-Teeth, 1 Inch Arbor, 10BLADEST, One Per Pack
The Evolution Power Tools 10BLADEST Professional Blade for Cutting Mild Steel and Ferrous Metal is a 10 inch TCT saw blade with 52 teeth, designed for table saws and other compatible saws. This blade is built for one specific job: cutting mild steel and ferrous metal. Do not use it on galvanized, hardened, or high-carbon steel, as that will damage the blade and could be unsafe.
It works best for things like angle iron, flat bar, and steel tubing.
The blade is made from high-quality Japanese carbide that’s heat-treated for extra durability. This gives you a clean cut without the usual headaches. One of the best things about this blade is how cool it runs. You can touch the finished cut just moments after cutting, because it produces virtually no heat, no burrs, and almost no sparks.
That makes your workspace safer and more comfortable, especially compared to abrasive wheels that throw sparks everywhere and leave hot edges.
Durability is a big focus here. The premium Tungsten Carbide Teeth (TCT) give you a long blade life, and the hardened steel body helps minimize vibration during cuts. The thin kerf design means you get accurate cuts while putting less strain on your saw, which extends the life of your tool too.
DEWALT 14" Chop Saw Blade, Metal Cut-Off Wheel (DW8001)
The DEWALT 14″ Chop Saw Blade, Metal Cut-Off Wheel (DW8001) is a tool built for serious cutting work. Its main job is to slice through metal quickly and cleanly, and it is designed to keep doing that job for a long time.
This wheel uses high performance aluminum oxide grain. That might sound technical, but what it means for you is simple. The blade stays sharp longer, so you spend less time changing wheels and more time getting things done.
The cutting action is fast because of this grain choice. You won’t be fighting with the tool to get through thick metal stock.
There is a high grain concentration in this wheel. What does that do? It gives you an agressive cutting action. The blade bites into the metal instead of skidding or bouncing. This makes for a smoother running wheel overall. Less vibration in your hands means better control and a cleaner cut.
The high concentration of grain also means the wheel itself lasts longer before it wears down to nothing.
DEWALT uses a proprietary material mix in the bond of this wheel. This is the stuff that holds all the cutting grains together. The mix is engineered to be durable, which gives you a long life wheel. It resists cracking and chipping during tough cuts.
TOMAX 10-Inch 80 Tooth TCG Aluminum and Non-Ferrous Metal Saw Blade with 5/8-Inch Arbor
The TOMAX 10-Inch 80 Tooth TCG Aluminum and Non-Ferrous Metal Saw Blade with 5/8-Inch Arbor is a solid choice if you work with softer materials. This blade is made for cutting plastic, aluminum, and other non-ferrous metals. It is not for wood or steel. The 80 teeth and TCG grind give you a durable and smooth cut. You won’t get much chipping or rough edges on your workpiece.
That is important when you need a clean finish on aluminum extrusions or plastic sheets.
The blade uses construction grade carbide teeth. These teeth are built to handle the abrasion from non-ferrous materials. They provide maximum resistance for longer life. So you will not need to replace the blade after a few uses. The carbide stays sharp longer than standard steel teeth. That saves you time and money in the long run.
There is also an electrophoretic coating on the blade.
This coating reduces rusting and corrosion. If you work in a humid shop or store your blades for a while, this is a big plus. The blade stays clean and ready to use. No nasty rust spots to ruin your cuts.
The arbor size is 5/8-inch. That is the standard size for most table saws and miter saws. But you should check your saw’s arbor before buying. It fits most common saws without any adaptor. Just mount it and go.
Tomax backs this blade with a quality guarantee.
TWIN-TOWN 10-Inch 52 Teeth Dry Cut Steel and Ferrous Metal Cermet Saw Blade with 1-Inch Arbor
The TWIN-TOWN 10-Inch 52 Teeth Dry Cut Steel and Ferrous Metal Cermet Saw Blade with 1-Inch Arbor is built for cutting metal cleanly and quickly. This blade uses the newest generation of cermet material. Cermet is a composite made from ceramic and metal. The tips are designed to stay cool and last a long time. That means less heat buildup and fewer blade changes for you.
This is a metal cutting saw blade. It works on a wide variety of mild steel profiles.
You can cut pipe, angle iron, tube, channels, steel studs, thin gauge, and even solid bars. It is a dry cut blade, so no messy coolant is needed. Just clamp your material and let the blade do the work. The 52 teeth give you a smooth, burr-free cut on most ferrous metals.
Laser cut stabilizer vents are built into the blade. These vents trap noise and vibration. They also keep the blade cooler during use. Less vibration means more control for you. It also helps reduce blade warp over time.
The blade stays true, so your cuts stay straight.
An electrophoretic coating is applied to the blade. This coating reduces rusting and corrosion. If you work in a shop with moisture or store tools in a damp area, this is a big plus. The blade will last longer with out rust spots forming on the surface.
The blade is 10 inches in diameter with 52 teeth and a 1 inch arbor. It runs at 3000 RPM. Use it on low-RPM metal cut off saws only. Do not use it on high-speed wood saws.
TOYAKI 10-Inch Miter Saw Blade, TCG Aluminum Working 120-Tooth Ultra-Fine Finish Professional Saw Blade for Miter Saws Table Saws and Circular Saws,Arbor 5/8-inch(16mm)
The TOYAKI 10-Inch Miter Saw Blade, TCG Aluminum Working 120-Tooth Ultra-Fine Finish Professional Saw Blade is built for a specific job. It’s made to cut aluminum, plastic, and non-ferrous metals. If you work with these materials, this blade might be what you need.
This blade has 120 teeth. That is a high tooth count. It gives you a very fine finish. You get smooth cuts right from the start. The quality stays the same as you use it over time.
So you don’t have to worry about the blade wearing down fast and making rough edges. It keeps cutting cleanly for a long time.
The blade size is 10 inches in diameter. It is 2.8mm thick. That thickness helps it stay balanced. When the blade is balanced, your cuts are more accurate. It also makes the saw run smoother. You will feel less vibration. That means less strain on your saw and on your hands. It is a stable blade for steady work.
Installing it is simple.
It has a standard 5/8-inch arbor, which is also 16mm. Most miter saws, table saws, and circular saws use this size. You can swap out your old blade without any hassle. Just make sure your saw accepts a 10-inch blade and a 5/8-inch arbor. Then you are good to go.
This is a professional-grade blade. It uses high-grade carbide material. That makes it strong and durable. It holds up to repeated use. The carbide tips stay sharp longer than cheaper blades.
CMT 256.050.10 ITK Xtreme Industrial Combination Saw Blade, 10-Inch x 50 Teeth 4 ATB + 1 Flat Grind with 5/8-Inch Bore
The CMT 256.050.10 ITK Xtreme Industrial Combination Saw Blade is a 10-inch, 50-tooth blade designed for both rip cuts and crosscuts. It comes with a 5/8-inch bore and is built for serious work. This is not a general-purpose blade; it is a combination blade that handles two jobs without needing to swap out blades constantly.
You get a blend of tooth geometry that makes this blade versatile. The grind is 4 ATB (Alternate Top Bevel) plus 1 flat grind.
This setup gives you clean cuts across different materials. The large gullets between the teeth are a key feature. They allow for deep cuts and effective chip clearance. This means you can push through thicker stock without the blade bogging down or burning the wood.
What can you cut with it? Solid wood, melamine, laminates, plywood, and chipboard. It works well on radial arm saws, miter saws, and table saws. The blade has a 0.098-inch kerf thickness and a 0.071-inch plate thickness.
The 15-degree hook angle is a good middle ground. It provides agressive cutting without being too grabby.
The teeth are made from micrograin carbide. This material holds an edge for a long time. You get consistent, smooth cuts even after repeated use. The blade is made for cutting wood and wood products, and the carbide quality shows in the finish it leaves behind. There is less tearout on laminates and melamine compared to cheaper blades.
The plate itself is laser-cut.
IVY Classic 40088 Swift Cut 10-Inch x 3/32-Inch x 5/8-Inch Arbor, Metal Cut-Off Blade for Chop Saws, 1-Piece
The IVY Classic 40088 Swift Cut 10-Inch x 3/32-Inch x 5/8-Inch Arbor, Metal Cut-Off Blade for Chop Saws is a single-piece blade built for cutting through ferrous metals. This means it is designed to handle steel, angle iron, sheet metal, and similar materials. It is not meant for high-speed saws, so keep it on your standard chop saw for best results.
The blade uses a resin bonded Aluminum-Oxide grain. This helps it cut faster through metal without slowing you down.
It is a Type 1 blade, so it is strictly for cutting—not for grinding or finishing. The focus here is on clean, straight cuts through tough materials.
Safety and durability are built into the design. The blade is double reinforced with fiberglass mesh. This adds strength and helps prevent the blade from shattering during use. The arbor is reinforced with metal as well, giving you extra strength where the blade mounts to your saw.
These features work together to make the blade more reliable and safer for repetitive cutting tasks.
Here are the key specs you need to know. The blade diameter is 10 inches. The thickness is 3/32-inch, which is slim enough for efficient cutting but sturdy enough for heavy use. The arbor size is 5/8-inch, a common fit for many chop saws. The maximum RPM rating is 6,100, so make sure your saw does not exceed that speed.
DEWALT Circular Saw Blade, 7 1/4 Inch, 16 Tooth, Metal Cutting (DW3330)
The DEWALT Circular Saw Blade, 7 1/4 Inch, 16 Tooth, Metal Cutting (DW3330) is a straightfoward tool built for one job: cutting through steel and iron. If you are working with metal studs, rebar, or heavy-gauge sheet metal, this blade is designed to handle that tough material without bogging down. The blade is 7-1/4 inches in diameter, which is a common size for most circular saws. That means you can likely pop it right onto your existing saw without needing any special adapters.
It has 16 teeth, which is a low tooth count. This is intentional. Fewer teeth means faster, more aggresive cuts through metal. Each tooth takes a bigger bite, so you get through your work quicker. But because its cutting metal, you will get a rougher edge compared to a blade with more teeth. That is the trade-off. It is for speed, not for a polished finish. One of the key things to know is that this is a steel and iron blade. It is not meant for wood, plastic, or masonry.
Using it on the wrong material will damage the blade and could be unsafe. The blade itself is made to last, but treat it right and it will keep cutting straight. It is also manufactured in China, which keeps the cost down while still meeting DEWALT’s quality standards. You are getting a reliable blade without paying a premium for a brand name. Using it is simple. You just install it like any other circular saw blade. Make sure the arbor is clean and the blade spins freely.
FOXBC 7-1/4 inch Circular Saw Blade Metal and Stainless Steel Cutting 48 Teeth, Replacement for Diablo D0748CF Ceramic Carbide Saw Blade
The FOXBC 7-1/4 inch Circular Saw Blade Metal and Stainless Steel Cutting 48 Teeth, Replacement for Diablo D0748CF Ceramic Carbide Saw Blade is built for serious metal work. This is a 7-1/4 inch blade with cermet carbide tips, 48 teeth, a .075 inch kerf, and a 5/8 inch arbor. It runs at a max of 5800 RPM and includes a diamond knockout. You can use it with both cordless and corded circular saws.
What sets this blade apart is its construction.
It uses premium Japan ceramic and metallic teeth. These materials handle high heat and offer increased hardness. That means superior wear resistance, fewer blade changes, and up to 25 times longer life compared to standard grinding discs. The blade is ideal for cutting steel studs, channel, angle iron, EMT conduit, and all-thread. For studs and tubing, the wall thickness should be 1/16 inch (16 gauge) minimum and 1/4 inch maximum.
For plates and bars, the thickness range is 1/8 inch (11 gauge) minimum to 1/2 inch maximum. For rods, the diameter range is 1/4 inch minimum to 1-1/2 inches maximum.
You will notice a big difference in temperature. This blade delivers up to 50 times cooler cuts when compaired to a grinding disc. Grinding discs can increase steel temperature by up to 500 degrees, which permanently discolors the metal. The FOXBC blade keeps things cool, so your steel stays clean.
FOXBC 10-Inch Saw Blade 100-Tooth TCG for Aluminum and Non-Ferrous Metal Cutting with 5/8-Inch Arbor
The FOXBC 10-Inch Saw Blade 100-Tooth TCG for Aluminum and Non-Ferrous Metal Cutting with 5/8-Inch Arbor is built for one thing: clean, accurate cuts in metal. This is a specialized blade, so let’s look at what it actually does. The blade measures exactly 10 inches with a 5/8-inch arbor, fitting most standard saws. It has 100 teeth and a thin kerf of just 0.095 inches. That thin kerf means you lose less material during the cut, which is important when working with expensive aluminum or brass.
The teeth use a Triple Chip Grind (TCG) geometry. This design gives you a smooth, burr-free edge, and it helps the blade last longer because each tooth takes a smaller chip of material. It’s ideal for cutting thin aluminum (up to 1/8 inch), medium pieces (3/32 to 1/4 inch), and even thicker stock (3/16 to 7/16 inch). You can use it on extrusions, copper pipe, brass plate, or other soft non-ferrous metals. The blade is made from high-density tungsten carbide.
This material is tough and wear-resistant, so you get a long working life even if you cut frequently. You don’t have to swap blades as often. It also has laser-cut stabilizer vents along the body. These vents trap noise and reduce vibration. That makes a big difference when you are making repeated cuts on a miter saw or table saw—it keeps the cut steady and the blade accurate. Compatibility is wide.
Table Saw Metal Cutting Blade Buying Guide
Cut through metal smoothly with a blade built for durability and clean edges. Picking teh right table saw metal cutting blade can feel tricky, but it’s really about matching the blade to your material and your saw. A good blade saves you from messy cuts, burnt edges, and dangerous kickback. Let’s break down what matters most so you can make a smart choice.
Tooth Count and Cut Quality
More teeth mean smoother cuts. For thin metal like aluminum or steel sheet, a blade with 60 to 80 teeth gives you a clean finish with less burring. Fewer teeth, like a 40-tooth blade, cut faster but leave rougher edges. Think about your project: if you need precise, ready-to-weld edges, go higher. If speed is your game and you’ll grind later, lower counts work fine. Ever had a blade snag on thin material? That’s often a low tooth count issue.
Blade Material and Coating
Carbide-tipped blades are the standard for metal cutting. They stay sharp longer than steel blades. Look for a coating like titanium or a non-stick finish. These reduce friction and heat buildup, which keeps the blade from warping. Heat is your enemy here—it dulls blades fast and can even damage your saw. A coated blade also helps prevent gumming from aluminum, which is a real pain to clean off later.
Kerf Width and Stability
Thin kerf blades remove less material, so your saw works harder less. They’re great for smaller saws with less power. But thick kerf blades are more stable and resist wobble, giving you straighter cuts on thicker metal. If you’ve ever watched a blade wander mid-cut, you know stability matters. For heavy-duty work, a full kerf blade is the safer bet, even if it needs a bit more motor power.
Safety Features to Check
Metal cutting throws sparks and debris. Look for blades with a negative hook angle—this reduces the risk of the blade grabbing the workpiece and kicking it back at you. Also, check that the arbor hole fits your saw exactly. A loose fit can cause vibrations that ruin your cut and the blade. Always wear goggles and gloves, but a well-designed blade is your first layer of protection.
Frequently Asked Questions About Table Saw Metal Cutting Blade
Can I use any table saw blade to cut metal?
No, you can’t. Standard wood-cutting blades aren’t safe for metal. You need a special metal cutting blade. It has different teeth and materials. Using the wrong blade can damage your saw or hurt you. Always pick a blade made for metal.
What kind of metal can I cut with a table saw blade?
You can cut soft metals like aluminum, brass, and copper. Some blades handle thin steel too. But thick or hard metals like stainless steel are risky. Check the blade’s label for its limits. When in doubt, start with thin, soft metal sheets.
Do I need a special table saw for metal cutting?
Not really. A standard table saw works, but you need the right blade. However, your saw must have enough power. A 10-inch blade and a motor with at least 2 horsepower is a good starting point. Also, use a slow speed setting if your saw has one. This helps prevent overheating.
What safety gear should I wear?
Always wear safety glasses. Metal cutting creates sharp chips, not sawdust. Gloves are a bad idea—thay can get caught. Wear hearing protection too. Metal cutting is loud. And tie back loose clothing or hair. Safety first, alwasy.
How do I know what tooth count to choose?
More teeth give a smoother cut. For thin metal, choose 60 to 80 teeth. For thicker metal, 40 to 60 teeth works better. Fewer teeth cut faster but leave a rough edge. Think about your project. Smooth edges? Pick higher teeth. Faster cuts? Go lower.
Can I cut metal without coolant or lubricant?
Yes, many metal cutting blades are designed for dry cutting. They have coatings to reduce heat and friction. But adding a little lubricant, like a spray or wax stick, can extend the blade’s life. Just don’t use water—it can cause rust. Check the blade’s instructions first.
How long does a metal cutting blade last?
It depends on use. Cutting thin aluminum might last many projects. Cutting thick steel wears it out faster. Signs of wear include burning smells, rough cuts, or slower feeding. Replace it when you see these. A worn blade is dangerouse.
Closing Thoughts
Metal cutting blades handle aluminum and steel without damaging your saw. That’s the whole point. You don’t need a seperate tool or a complicated setup. Just swap the blade, adjust the speed, and your saw is ready for a whole new range of projects. Whether you’re cutting aluminum tracks for a custom shelf or trimming thin steel brackets, the right blade makes the job simple and safe. Stick with carbide-tipped blades for aluminum, and check the tooth count—more teeth give smoother cuts on thinner material. You’ll get cleaner edges and less burr, which saves you from extra filing later.
Picking the right table saw metal cutting blade doesn’t have to be hard. Think about what you cut most often. Aluminum? Steel? Both? Match the blade to material thickness, and always watch the RPM rating. Your saws manual is your best friend here. A good blade pays for itself in time saved and materials not wasted. So take a minute, check your needs, and grab a blade that fits. Your projects will go smoother, and you’ll wonder why you didn’t try it sooner.