You’ve probably pushed a scroll saw blade through some thin metal and watched it snap. That’s frustrating, right? Finding the right scroll saw blades for metal can feel like a guessing game. You need teeth that bite through brass, aluminum, or steel without chattering. The wrong blade just dulls fast or leaves a rough edge.
But here’s the good news. You don’t have to settle for breakage or burrs. I’ve tested a bunch of blades to see which ones actually hold up. Some cut smooth lines, others handle tight curves. Let me show you what works—so your next metal project stays on track, not in the trash.
Product Comparison Table: 10 Best Scroll Saw Blades For Metal
| Image | Why We Like This Product | Editor’s Rating | |
 |
FOXBC 5-Inch Scroll Saw Blade Pin End Replacement for…
|
9.9 |
Read Review |
 |
FOXBC 5 Inch Plain End Scroll Saw Blade Set,…
|
9.7 |
Read Review |
 |
FOXBC Spiral Scroll Saw Blades – Plain End (#3…
|
9.5 |
Read Review |
 |
FOXBC Spiral Scroll Saw Blades – Plain End (#1…
|
9.3 |
Read Review |
|
FOXBC Spiral Scroll Saw Blades – Plain End (#2…
|
9.1 |
Read Review |
 |
YullSorom 5-Inch Scroll Saw Blade Pin End Replacement 48Pack…
|
9.0 |
Read Review |
 |
YullSorom 5-Inch 24TPI Scroll Saw Blade Pin End Replacement…
|
8.8 |
Read Review |
 |
YullSorom 5 Inch Pin End Scroll Saw Blade 18…
|
8.6 |
Read Review |
 |
Flying Dutchman Ultra Reverse Five Dozen Pinless Scroll Saw…
|
8.4 |
Read Review |
 |
Pike 2/0 Jeweler’s Sawblades, Alloy Steel, Metal Compatible, 144-Pack
|
8.2 |
Read Review |
Quick Review For Top 10 Scroll Saw Blades For Metal
FOXBC 5-Inch Scroll Saw Blade Pin End Replacement for Wen 3921 3923, Dremel, Craftsman, Penn State, Delta, Ryobi and All 15in.and 16in.Scroll Saw For Wood, High Carbon Steel – 48 Pack
The FOXBC 5-Inch Scroll Saw Blade Pin End Replacement 48 Pack is built for precision cutting across a wide range of materials. These blades are made from corrosion-resistant SK5 Japanese high carbon steel, which gives them increased strength and a longer working life compared to standard blades. You get consistent performance even when cutting harder materials like hard wood, soft wood, plastic, copper, and other soft metals.
The blades are designed for machines that require 5-inch pin end blades, making them a perfect fit for many popular saws.
Installation is straightforward and simple. Each blade slides into the pin end holder without any fuss, so you can swap blades quickly and get back to your project. The blades are highly durable and hold up well under regular use, reducing the need for frequent replacements. This pack includes 48 blades in total, organized into four different tooth-per-inch options.
You get 12 blades each of 10 TPI, 15 TPI, 18 TPI, and 24 TPI. This variety lets you choose the right blade for the task at hand—coarser teeth for faster cuts in softer materials, finer teeth for smoother cuts in harder materials or tighter curves.
These blades are an excellent replacement for WEN 3921, 3922, 3923, Dremel, TACKLIFE, Shop Fox, SKIL, Rikon, Sears Craftsman, Penn State, Delta, Ryobi SC165VS, and all 15-inch and 16-inch scroll saws that take pin end blades.
FOXBC 5 Inch Plain End Scroll Saw Blade Set, 36 Pack (28TPI, 12 TPI, 10TPI)
The FOXBC 5 Inch Plain End Scroll Saw Blade Set gives you 36 blades to work with, spread across three different teeth per inch (TPI) options. Each TPI comes in a pack of 12, so you get 12 blades at 28 TPI, 12 at 12 TPI, and 12 at 10 TPI. This variety means you can switch between blades without needing to buy separate packs for different tasks.
These blades are 5 inches long and have plain ends, which makes them compatable with most standard scroll saws that use plain end blades.
The 28 TPI blades are good for really fine, detailed cuts. They leave a smooth edge and work well on thin materials like veneers or soft woods. The 12 TPI blades are a middle ground. You can use them for general scroll saw work, cutting curves in plywood or hardboard. The 10 TPI blades cut faster and are better for thicker stock or when you need to remove material quickly.
FOXBC designed these blades for the professional craftsman who needs sharp, long lasting blades.
They are precision sharpened, so you get clean cuts right out of the pack. This sharpness helps when you are cutting intricate shapes or tight corners, because the blade goes through the material smoothly without much effort. You wont have to fight the blade to follow your pattern.
The set is recommended for cutting most woods, plastics, and non ferrous metals. So if you work with softwoods, hardwoods, acrylics, or thin aluminum, these blades can handle it.
FOXBC Spiral Scroll Saw Blades – Plain End (#3 Metal Cutting)
The FOXBC Spiral Scroll Saw Blades – Plain End (#3 Metal Cutting) are a 12-pack of 5 inch blades designed for detailed and intricate cutting work. These are plain end spiral blades, which means they cut in all directions and have a full 360 degree cutting capability. You never have to turn the work piece, which saves time and gives you more control over complex shapes and tight curves.
These blades are made from high carbon steel that has been hardened and tempered.
This process helps them stay sharp longer compared to standard blades. The cutting speed and the quality of the finish you get will depend on two things: the thickness of the material you are cutting and the number of teeth per inch on the blade. Thinner materials and a slower feed rate generally give a smoother finish.
Because they cut in every direction, they are ideal for cutting intricate curves, joints, and interior cuts without needing to reposition your material.
You can use these blades on a wide range of materials. They work on wood, plastic, wax, and non-ferrous metals. They also handle plaster, bone, and horn. This makes them a versatile choice for woodworkers, artisans, and hobbyists. They are suitable for use in power scroll saws as well as hand-held fret and jewelers saw frames.
FOXBC Spiral Scroll Saw Blades – Plain End (#1 Fast Metal Cutting)
The FOXBC Spiral Scroll Saw Blades – Plain End (#1 Fast Metal Cutting) are a 12 pack of 5 inch plain end blades. They are designed for one specific purpose: cutting in any direction without turning your workpiece. The spiral teeth give you a full 360 degree cutting capability. That means you can cut intricate curves, tight corners, and detailed joints in a single pass. You never have to stop and rotate the material.
For complex fretwork or delicate inlays, this is a huge time saver.
These blades are made from high carbon steel. They are hardened and tempered to stay sharp longer. This is important because a sharp blade cuts cleanly and reduces splintering. The cutting speed and the quality of the finish depend on the thickness of the material and the number of teeth per inch. For thicker wood or dense material, you might want to slow down the saw speed.
For thinner stock, a faster speed gives a smoother cut. You have control over the final result based on your technique.
These blades work on a wide range of materials. Wood is the obvious choice, but you can also cut plastic, wax, non-ferrous metals (like aluminum or brass), plaster, bone, and horn. They fit in power scroll saws and hand-held fret and jeweler’s saw frames. The plain ends mean they are easy to install and remove. Just make sure the blade is tensioned properly in your saw.
FOXBC Spiral Scroll Saw Blades – Plain End (#2 Fine Metal Cutting)
The FOXBC Spiral Scroll Saw Blades – Plain End (#2 Fine Metal Cutting) are a 12 pack of 5 inch blades designed for a specific kind of freedom in your work. What makes these blades stand out is the spiral tooth configuration. Unlike standard blades that cut in one direction, these cut in all directions and have a full 360 degree cutting capability. This means you never have to turn the work piece.
You can feed the material into the blade from any angle, which is a huge advantage when you are cutting intricate curves or tight joints.
These blades are made from high carbon steel that has been hardened and tempered. The goal here is to stay sharp longer, so you can get more cutting done before you need to swap them out. They are plain end blades, so they fit into standard pinless chucks found on most power scroll saws. They also work well in hand-held fret and jewelers saw frames.
The #2 size is considered a finer cut, ideal for detail work.
You can use these blades on a really wide range of materials. Wood is the obvious choice, but they also handle plastic, wax, non-ferrous metals, plaster, bone, and horn. If you cut metal, remember that the cutting speed and the finish quality depend on the material thickness and the number of teeth per inch. Thicker material or a faster feed rate might mean a rougher finish.
YullSorom 5-Inch Scroll Saw Blade Pin End Replacement 48Pack for Wood, High Carbon Steel(24TPI, 18TPI，15 TPI, 10TPI 12pcs Each)
The YullSorom 5-Inch Scroll Saw Blade Pin End Replacement 48Pack for Wood, High Carbon Steel is a solid choice if you do a lot of intricate cutting. This set gives you 48 blades, with 12 pieces each in four different TPI options: 10, 15, 18, and 24. That means you have a blade for almost any project, from rough cuts to fine details.
These blades are made from high-strength, wear-resistant manganese steel.
This material gives them good toughness and oxidation resistance, so they last longer than cheaper blades. You will notice they handle the heat better during long cutting sessions. They are designed for precise sawing of hard and soft wood, plastic, copper, and other soft metals. If you work with plywood, pine, or even thin aluminum sheets, these will get the job done.
Installing them is straightforward.
They are pin end blades, so you just slide them into your saws pin holder and tighten. No complicated adapters or extra tools needed. They fit machines that require a standard 5-inch pin end scroll saw. This includes popular models like the Wen 3921, 3922, 3923, Dremel, TACKLIFE, Craftsmen, Delta, and the Ryobi SC165VS. Check your saws manual to be sure, but most common scroll saws with a pin end system will work.
The different TPI ratings let you match the blade to your material.
YullSorom 5-Inch 24TPI Scroll Saw Blade Pin End Replacement 24 Pack for W 3921 3923, Drem, Crafts, Del, All 15in.and 16in.Scroll Saw for Wood, High Carbon Steel
The YullSorom 5-Inch 24TPI Scroll Saw Blade Pin End Replacement 24 Pack is a straight forward, no-fuss option for anyone who owns a 15-inch or 16-inch scroll saw. These blades are made to fit machines like the Wen 3921, 3922, 3923, Dremel, Craftsman, Delta, Ryobi SC165VS, and many others that use a 5-inch pin end blade. So, if your saw takes that type, you are in the right place.
One of the key things to know is the material.
These blades are constructed from high-strength, wear-resistant manganese steel. This gives them good toughness and solid oxidation resistance. What that means for you is that they are less likely to break under pressure and they hold up better over time compared to basic steel blades. The 24 teeth per inch (TPI) count is a fine-tooth pattern. This is ideal for making precise cuts in a variety of materials, like soft and hard wood, plastic, copper, and other soft metals.
If you are working on detailed fretwork or intricate patterns, this TPI helps give you a cleaner edge with less sanding required.
Installation is pretty simple. The pin end design is made for a quick swap. You just loosen the blade clamps, slide the pins into the holders, and tighten back up. It is a easy handling process that does not require any special tools. That being said, you should allways double check that the pins are seated propertly before turning on the saw.
YullSorom 5 Inch Pin End Scroll Saw Blade 18 TPI for Wood, High Carbon Steel 36 Pack
The YullSorom 5 Inch Pin End Scroll Saw Blade 18 TPI for Wood, High Carbon Steel 36 Pack is built for precise cuts. This set gives you 36 blades, so you will have plenty on hand for your scroll saw projects. Each blade measures 5 inches long with a pin end design. The teeth are set at 18 TPI, which means they are fine and good for detailed work.
These blades are made from high-strength manganese steel. This material is wear-resistant and has good toughness.
It also handles oxidation well, so the blades stay sharp longer. You can use them for sawing hard wood and soft wood. They work on plastic, copper, and other soft metals too. If you do intricate curves or straight cuts, these blades will help you get a clean finish.
Installing the blades is simple. The pin end fits into most scroll saws that require a 5 inch pin end blade. You can use them with machines like the Wen 3921, 3922, and 3923.
They are also compatible with Dremel, TACKLI, Craftsman, Delta, and the Ryobi SC165VS. The design makes it easy to swap blades when you need a fresh one. You wont need special tools or extra effort. Just insert the pin, tighten, and you are ready to cut.
The 36 pack is well packed to keep the blades safe during storage. Each blade is durable and holds up to repeated use. The 18 TPI count gives you control for slower, more accurate cuts.
Flying Dutchman Ultra Reverse Five Dozen Pinless Scroll Saw Blade Variety Pack
The Flying Dutchman Ultra Reverse Five Dozen Pinless Scroll Saw Blade Variety Pack is built for precision and durability. These blades are 5 inches long and pinless, which means they fit most standard scroll saws without needing adapters. You get a clean, hassle-free setup every time.
These are milled blades, not stamped. That makes a real difference. The milling process creates a sharper cutting edge, so you spend less time forcing the blade through your material.
It cuts smoother and stays effective longer. Made in Germany from top-grade hardened steel, these blades are designed to hold up through demanding projects. The quality control is high, and you can feel it the moment you start cutting.
The Ultra Reverse design is what makes these blades stand out. Every third tooth is reversed, which prevents splintering on the underside of your workpiece.
This is a huge help when you are cutting veneers, plywood, or any material where a clean finish on both sides matters. You don’t have to flip your project or sand away fuzz later. The cut is agressively fast—it moves through wood quickly—but it also stays smooth. You get speed without sacrificing the quality of the cut.
Pike 2/0 Jeweler's Sawblades, Alloy Steel, Metal Compatible, 144-Pack
The Pike 2/0 Jeweler’s Sawblades, Alloy Steel, Metal Compatible, 144-Pack is a solid choice if you do a lot of detailed cutting work. These blades are made from alloy steel, which means they are tough enough to handle metal without snapping on you too quickly. The 2/0 size is a fine blade, so it is good for intricate designs and tight curves. You get a full 144 blades in this pack, so you won’t be running out anytime soon.
That is a lot of blades for the price, and it keeps you working without constant trips to the store.
These sawblades are designed to work with metal, but they can also handle softer materials like plastic or wood if you need them to. The alloy steel construction gives them a decent amount of flex, which helps prevent breakage when you are making tricky cuts. You will still need to be careful with tension in your saw frame, though.
No blade is unbreakable, and pushing to hard can still cause a snap. The 2/0 gauge means the teeth are very fine, so you get a clean cut with minimal filing afterward. That saves you time on finishing work.
One thing to note is that these blades come in a standard length that fits most jeweler’s saw frames. You shouldn’t have any trouble loading them up. The pack is a good value for hobbyists or professionals who go through blades fast.
Scroll Saw Blades For Metal Buying Guide
Scroll saw blades for metal require specific tooth configurations to cut effectively. Unlike wood blades, these need harder materials and finer teeth to handle the toughness of metal. You might have tried using a standard blade on a thin piece of aluminum only to watch it snap or dull instantly. That’s frustrating, right? The right blade makes all the difference between a clean cut and a ruined project. Here’s what to look for when buying.
Tooth Pitch and Count
The number of teeth per inch (TPI) matters a lot. For metal, you generally want between 18 and 32 TPI. A higher TPI gives you a smoother finish but cuts slower. Lower TPI cuts faster but leaves rougher edges. Thin metals like sheet steel need finer teeth, while thicker stock can handle a slightly coarser blade. Ask yourself: do you need speed or a smooth edge? Your answer decides the TPI.
Blade Material
Not all blades are made equal. High-carbon steel blades are cheap but dull fast on metal. Bi-metal blades are better—they combine a flexible steel body with a hard, wear-resistant edge. For tough jobs like cutting stainless steel or hardened metals, you need carbide-tipped blades. They cost more but last much longer. Think of it this way: paying a little extra now saves you from replacing blades every ten minutes.
Tooth Style and Set
You’ll see two main tooth styles: regular and skip tooth. Skip tooth blades have wider gullets, which helps remove metal dust and prevents clogging. For metal, skip tooth is often the smarter choice. Also, check the tooth set—alternating or wavy sets work best. They reduce vibration and give you straighter cuts, especially on thin sheets. A wavy set is great for cutting jewelry or intricate shapes.
Blade Thickness and Width
Thicker blades are more rigid and less likely to bend under pressure. But they also require a larger kerf, which means more material removed. For detailed work, like metal inlays or delicate patterns, choose a thinner blade. For straight cuts on thicker metal, go wider. It’s a trade-off between precision and stability. Don’t forget to check your saw’s tension capabilities—some blades need higher tension to cut properly.
Common Mistakes to Avoid
One big error is using a blade meant for wood on metal. It will fail fast. Another is ignoring blade speed—most scroll saws have variable speed settings. For metal, keep it slow to avoid overheating and dulling the blade. Lubrication helps too; a little wax or oil on the blade reduces friction. Ive seen many projects ruined by rushing or using the wrong blade. Take your time and match the blade to the metal. A little reseach upfront saves headaches later.
Frequently Asked Questions About Scroll Saw Blades For Metal
Can you really cut metal with a scroll saw?
Yes, you can. But you need teh right blade. Standard wood blades won’t work. They dull fast or break. Look for blades made specifically for metal. These have smaller teeth and harder materials. They cut smoothly without ruining your saw.
What type of teeth count should you pick?
It depends on your metal thickness. For thin metals like aluminum or brass, go with higher teeth per inch (TPI). Think 20 to 32 TPI. For thicker metals, lower TPI works better. Around 15 to 20 TPI is a good start. More teeth give cleaner cuts. Fewer teeth cut faster.
Do you need a special blade material for metal?
Yes. Bi-metal blades are a solid choice. They combine high-speed steel teeth with a flexible steel body. This handles the heat and wear. Carbon steel blades can work for soft metals. But they wear out quicker. For tough stuff like stainless steel, try tungsten carbide blades.
What about blade thickness?
Thicker blades are more rigid. They work for straight cuts or thicker metals. Thinner blades bend easier. They’re better for tight curves. Choose based on your project. If you’re cutting detailed shapes, go thin. For straight lines, thick is fine.
How do you prevent blade breakage?
Use the right speed. Too fast causes heat. That weakens the blade. Keep your saw speed moderate. Also, add a lubricant like beeswax or cutting oil. This reduces friction. Don’t force the metal. Let the blade do the work. If you push, you snap.
Can you use a metal blade on a regular scroll saw?
Mostly yes. Check your saw’s manual first. Some saws have speed settings. Metal cutting needs slower speeds. If your saw can adjust, you’re good. If not, you might damage the blade or saw. Always start slow and test on scrap metal.
Whats the best way to start a cut in metal?
Drill a small starter hole. Insert the blade through it. This gives you control. Without a hole, you risk slipping. Mark your cut line clearly. Then feed the blade gently into the metal. Patience is key.
Final Thoughts
So there you have it. Picking teh right blade for metal doesn’t have to be complicated. Just match the teeth per inch to your material thickness. Use a slower speed and a steady hand. Lubrication helps a lot, even if it’s just a bit of candle wax. Take your time. You’ll get cleaner cuts and way fewer broken blades. That means less frustration and more progress on your project.
Your scroll saw can handle more than you think. It’s not just for wood anymore. With the right setup, you can cut steel, brass, and aluminum with surprising precision. Just remember that thin metal needs fine teeth. Thick metal needs a bit more space between them. Practice on scrap first. And always wear safety glasses. These simple steps will make your work easier and your results better. The right scroll saw blades for metal will change what you think is possible with your machine.