A radial arm saw with table excels at long crosscuts and dadoes. You’ve probably seen these beasts in old workshops, gathering dust. But don’t underestimate them. This radial arm saw with table is a powerhouse for ripping long boards and cutting precise grooves. It’s like having a stationary saw that travels over your workpiece.
You get incredible control here. The blade pulls towards you, which feels a bit backwards at first. But once you get the hang of it, your cuts become super accurate. The table gives you a stable platform for heavy lumber. Its a tool that rewards patience and practice. We’ll break down exactly what makes this vintage design still worth your money today.
Product Comparison Table: 7 Best Radial Arm Saw With Table
| Image | Why We Like This Product | Editor’s Rating | |
 |
SKIL 15 Amp 10 Inch Portable Jobsite Table Saw…
|
9.5 |
Read Review |
 |
DEWALT Table Saw 10 Inch with Foldable Rolling Table…
|
9.2 |
Read Review |
 |
DEWALT 15 Amp 8-1/4 in. Compact Portable Jobsite Table…
|
9.0 |
Read Review |
 |
Table Saw 10 Inch, 15 Amp 5000RPM Powerful Tablesaw…
|
8.7 |
Read Review |
 |
Evolution R10TS 10″ Jobsite Table Saw | Zero-Clearance Throat…
|
8.4 |
Read Review |
 |
BOSCH GTS15-10 10 Inch Portable Jobsite Table Saw with…
|
8.2 |
Read Review |
 |
Evolution R8MTS 8-1/4″ Convertible Miter/Table Saw – Multi-Function Saw…
|
7.9 |
Read Review |
Quick Review For Top 7 Radial Arm Saw With Table
SKIL 15 Amp 10 Inch Portable Jobsite Table Saw with Folding Stand- TS6307-00
The SKIL 15 Amp 10 Inch Portable Jobsite Table Saw with Folding Stand- TS6307-00 is built for getting work done on site. It focuses on accuracy and easy setup, without extra frills.
You get a rack and pinion fence rail system. This keeps the fence perfectly parallel to the blade. The fence moves smoothly and locks firmly. It makes fast, accurate cuts every time. No more fiddling with a fence that slips or pinches the material.
The integrated folding stand is a huge plus.
The legs fold up quickly. This makes the saw easy to carry and store. It tucks away in a corner of your truck or workshop. When you need it, the stand sets up in seconds and feels stable under load.
Blade alignment is simple with the micro-adjustment feature. You can fine-tune the blade so it runs exactly parallel to the rip fence and the miter slot. This reduces binding and gives you cleaner cuts. It takes the guesswork out of setup.
Cutting capacity is solid.
You can cut material up to 4×4 at 90 degrees. For bevel cuts, it has a 2 to 47 degree range. There are positive stops at 0 and 45 degrees. A quick release lever lets you change angles fast. It is good for crown molding or angled cuts on framing.
Dust collection is handled by a port elbow. It redirects dust and chips into a container. This keeps your workspace cleaner and makes cleanup easier.
DEWALT Table Saw 10 Inch with Foldable Rolling Table Saw Stand, 15 Amp, 4800 RPM, 32-1/2-Inch Rip Capacity (DWE7491RS)
The DEWALT Table Saw 10 Inch with Foldable Rolling Table Saw Stand, 15 Amp, 4800 RPM, 32-1/2-Inch Rip Capacity (DWE7491RS) is built for jobsite work where you need both power and portability. This saw combines a solid cutting performance with a stand that folds up and rolls away, making it a practical choice for contractors or serious DIYers who move between projects.
The 15 amp motor spins the blade at 4800 RPM, giving you enough power to rip through hardwoods without bogging down.
You get a 32-1/2-inch rip capacity, so cutting larger sheets of plywood or shelving material is straightforward. The depth of cut measures 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees, which covers most common framing and trim work.
One of the standout features is the rack and pinion telescoping fence system. It makes fence adjustments fast, smooth, and accurate. You simply turn the wheels, and the fence glides into position. No tapping or measuring needed.
The patented material support also helps when you are making narrow rip cuts, giving you better control of small pieces.
The rolling stand is designed for easy set up and breakdown. It has large wheels and a handle, so you can tilt and roll the whole unit like a hand truck. The telescoping fence rails retract to make the package compact for storage or transport.
DEWALT 15 Amp 8-1/4 in. Compact Portable Jobsite Table Saw (DWE7485)
The Dewalt 15 Amp 8-1/4 in. Compact Portable Jobsite Table Saw (DWE7485) is a solid choice if you need to break down sheet goods on site. This saw gives you 24.5 inches of rip capacity. That is enough to rip a full 4×8 sheet of plywood or OSB without a problem. You can handle common framing and finish work without needing a larger, heavier saw.
The whole thing is built around a compact frame. It takes up less space in your truck or on the job, and it stores easily when your done.
The metal roll cage base adds durability for the bumps and drops that happen on a jobsite. It feels tough without being overly heavy.
Setting up your cuts is straight forward. The rack and pinion telescoping fence rails let you adjust the fence fast, smooth, and accurate. You don’t have to fight with sticky slides or guess at alignment. The fence locks in square, which saves you time and material.
On the side of the saw, there is on-board storage for the guard, fence, wrenches, and miter gauge. Everything has its place, so you are less likely to loose small parts.
The guarding system is the Site-Pro Modular Guarding System. It allows for tool-free adjustments of the guarding. You can swap out the riving knife or adjust the guard quickly without needing a tool.
Table Saw 10 Inch, 15 Amp 5000RPM Powerful Tablesaw With Stand & Protective Cover, 36 X 25 Inch Tabletop Saw 90° Cross Cut & 0-45° Bevel Cut, Adjustable Depth, for Woodworking, Metal, Plastic
The Table Saw 10 Inch, 15 Amp 5000RPM Powerful Tablesaw With Stand & Protective Cover is a solid piece of equipment for your workshop. It comes with a 36 x 25 inch tabletop that gives you a stable surface for your cuts. This saw is built to handle woodworking, but it can also cut through metal and plastic when you need it to.
You get adjustable cutting options with this tool. It offers a 90° cross cut for straight, clean lines.
For angled work, you can set the bevel cut anywhere from 0 to 45 degrees. The maximum cutting depth for a cross cut is 74mm, and for a bevel cut it is 52mm. This lets you handle different thicknesses of material without much trouble.
The design is portable, which makes moving it around easier. On the back, there is a port for connecting a dust collector. This helps keep your workspace cleaner by sucking up sawdust as you work.
There are also storage parts on both sides where you can keep wrenches and push rods handy. You wont have to search for tools when you need them.
Safety is a key feature here. The saw includes a transparent blade guard. It gives you a clear view of the cutting line while protecting your hands from accidental contact. A push stick is also included to help you guide material safely through the blade.
Evolution R10TS 10" Jobsite Table Saw | Zero-Clearance Throat Plate | Dado Plate Included | 15A Motor | 26” Rip | 3-3/8” Cut | 0-45° Bevel | Precision Fence | Heavy Duty Portable Woodworking Saw
The Evolution R10TS 10″ Jobsite Table Saw is built for real work, plain and simple. It comes with a zero-clearance throat plate and a dado plate included, so you’ve got options right out of the box. This saw is designed for jobsite use, and it shows.
You get a powerful 15A motor with soft start, which gives you high torque for cutting wood, mild steel, aluminum, and composites. The included premium 10″ TCT blade helps deliver precise, clean cuts without swapping blades right away.
The motor handles tough materials without bogging down, making it a solid choice for mixed-material jobs.
For cutting capacity, this saw offers a 26-inch rip capacity and a max cut depth of 3-3/8 inches. The bevel range goes from 0 to 45 degrees, with a geared adjustment for accuracy. The zero-clearance throat plate reduces tear-out, giving you cleaner cuts on finished surfaces.
The rack and pinion fence system allows micro-adjustable, repeatable precision, so you don’t have to fight with the fence every time you set up. An integrated cross-cut sled is also included for accurate crosscuts, saving you the hassle of building your own.
Portability matters on a jobsite, and this saw delivers. It has a lightweight steel frame with carry handles, plus onboard storage for accessories.
BOSCH GTS15-10 10 Inch Portable Jobsite Table Saw with Gravity-Rise Wheeled Stand, 15 Amp, 32-1/8 Inch Rip Capacity, 4 HP
The BOSCH GTS15-10 10 Inch Portable Jobsite Table Saw with Gravity-Rise Wheeled Stand is built for serious cutting on the move. This saw packs a 15-amp motor that spins at 3,800 rpm, so you can handle rip-cutting and cross-cutting through both fine and hard wood materials without bogging down. You get a full 32-1/8 inch rip capacity, which gives you plenty of room to break down sheet goods or long boards right at the jobsite. One of the standout features is the convenience brake.
It helps the blade stop in about three seconds, which means you can move on to your next cut faster and with less waiting around. The saw also has ClampZone areas on the tabletop. These let you use the surface as a light-duty, secondary work space for clamping down jigs or small pieces—handy when you need an extra hand. The open frame design uses a roll bar and lightweight construction for durability without adding unnessary weight. This makes it easier to move around.
Speaking of moving, the included GTA50W Gravity-Rise Wheeled Stand makes jobsite mobility a breeze. With a single-action setup and take down, you can go from rolling to cutting in seconds. The stand is lighter than previous models, so it’s less of a workout to load up. Under the hood, the soft-start circuitry manages the motor’s startup intensity. This helps minimize the chance of tripping a circuit breaker when you fire it up.
Evolution R8MTS 8-1/4" Convertible Miter/Table Saw – Multi-Function Saw – 0-45° Bevel & +/- 45° Miter – Multi-Material Cutting: Wood, Plastic, Metal – Compact, Powerful 12A Motor – TCT Blade Incl
The Evolution R8MTS 8-1/4″ Convertible Miter/Table Saw is a multi-function tool that does exactly what it says. You get a compound miter saw and a table saw in one compact machine. This is perfect for tight workshops, job sites, or just about any DIY project where space is limited. Switching between miter and table saw modes is simple. You just use the locking pins, and the saw converts in seconds.
No complicated setup or extra tools needed.
The cutting ability here is really versatile. One single TCT blade handles wood, plastic, mild steel, aluminum, and composites. You wont need to swap blades for different materials. It cuts hardwood with a fine finish, leaves steel burr-free, and even saws through reclaimed wood with embedded nails safely.
This makes it a great choice for demolition work or renovation projects where you never know what is inside the wood.
Precision is built into the design. The saw offers a 0 to 45 degree bevel and a miter range from 45 degrees left to 45 degrees right. There are pre-set stops for quick and accurate angle adjustments. The cast aluminum table top stays flat and sturdy. A dual-locking rip fence and thin-kerf blade work together to give you clean, exact cuts every time.
Radial Arm Saw With Table Buying Guide
A radial arm saw with table handles long boards and repetitive crosscut tasks efficiently. It is a workshop workhorse that many woodworkers either love or hate. Why teh mixed feelings? Because older models can be scary. The blade pulls toward you. That is why modern designs focus on safety. If you need repeatable cuts on long stock, this tool beats a miter saw. It also rips, dadoes, and even sands with the right attachments. But you have to choose wisely.
Motor Power and Blade Control
Look for at least a 2 HP motor. More power means cleaner cuts through hardwood. But watch the blade. A radial arm saw with table relies on a track system. The blade should slide smooth and stay square. If the arm wobbles, you will get bad cuts. Check for a return spring that works. That spring pulls the blade back after each cut. It keeps you safe. A locking mechanism is also key. You want to lock the blade at any angle without drift.
Table Size and Fence Quality
The table is your workspace. Bigger is better for long boards. A table that measures at least 24 by 48 inches gives you room to work. The fence must be flat and strong. A warped fence ruins accuracy. Look for a fence that adjusts easily. Some models have a sliding fence for dado cuts. That is a nice bonus. Clamp-downs or hold-downs help keep the wood steady. You do not want the board shifting mid-cut.
Safety Features You Should Not Skip
This is the biggest factor. A radial arm saw with table can bite. Look for a blade guard that covers the top and sides. Anti-kickback pawls are a must. They grab the wood if it tries to fly back. A riving knife also helps prevent kickback. Some models have a magnetic switch. That stops the saw if the power goes out and comes back. It might save your fingers. Do not buy a saw without these safety features. It is not worth the risk.
Versatility for Different Cuts
Can it do more than crosscuts? Good models let you rip boards. You rotate the motor 90 degrees and use the fence. Some allow bevel cuts up to 45 degrees. Dado sets work well if the arbor is long enough. Check if the saw accepts standard dado blades. A few models even accept a molding head for shaping edges. That gives you a lot of value from one tool. Just remember you get what you pay for. Cheap models often lack these features.
Frequently Asked Questions About Radial Arm Saw With Table
What is a radial arm saw with table?
A radial arm saw with table is a versatile woodworking tool. It has a circular saw blade mounted on a horizontal arm. The table provides a stable surface for your workpieces. You can use it for crosscuts, rip cuts, and even dadoes. It’s a powerful machine for precise cuts.
Is it safe to use a radial arm saw with table?
Yes, but you need to be careful. Always use teh blade guard and anti-kickback devices. Keep your hands away from the blade. Never reach behind the saw while it’s running. Modern models have safety features like electric brakes. Follow the manual for safe operation. Safety is your responsibility.
Can I use it for rip cuts?
Absolutely. A radial arm saw with table can do rip cuts. You adjust the saw to cut along the length of the wood. But be careful with rip cuts. They can be tricky because of kickback risk. Use a rip fence and push sticks for safety. It’s best for crosscuts, but rip cuts are possible.
What size blade should I get?
Most radial arm saws use a 10-inch or 12-inch blade. A 10-inch blade is common for home workshops. It cuts through 2x4s easily. A 12-inch blade gives deeper cuts. Check your saw’s specifications. The blade size affects cutting capacity and power needs.
How do I maintain the saw table?
Keep the table clean and flat. Wipe off sawdust after use. Check for warping or damage. You can apply a coat of paste wax to reduce friction. Lubricate the arm and carriage regularly. A well-maintained table helps with accuracy. It also prolongs the saw’s life.
Is it better than a miter saw?
It depends on your needs. A radial arm saw with table is more versatile. It can do rip cuts and dadoes. A miter saw is simpler and portable. For crosscuts only, a miter saw is fine. For more tasks, the radial arm saw wins. Both are good tools. Choose based on your projects.
How much space do I need?
These saws need room. You’ll need space for the arm to swing. A typical setup takes about 4 feet by 6 feet. Add space for material handling. Make sure your workshop has good lighting. A dedicated area is best. Don’t cramp it in a tight spot.
Before You Decide
Think about teh projects you want to tackle. This tool shines for making clean crosscuts in long boards and for ripping stock down to size. It gives you steady support and a flat surface, which helps you work faster and safer. Check the blade size and motor power to make sure they fit the materials you use most. Look at the table dimensions too. A bigger table gives you more room for large pieces. Also, see how easy it is to lock the arm and adjust the depth. Simple controls make setup quick and less frustrating. You don’t want to fight with your tools when you just want to build something.
If you need a tool that handles both crosscuts and ripping without switching machines, this radial arm saw with table is a solid choice. It saves space in your shop and reduces setup time. Just remember to measure your workspace first. The saw needs room for the arm to swing and for long boards to extend past the table. With good planning, this saw becomes a reliable helper for your woodworking projects.