Cut intricate designs in thin metal with fine, durable teeth that stay sharp. You need the right metal blades for scroll saw to pull off these delicate cuts. The wrong blade means frustration and ruined material. But the perfect blade? It glides through brass, copper, and even thin steel like a hot knife through butter. You get clean edges with zero burrs. Its almost like magic, but it’s just good engineering.
These blades are game-changers for your workshop. They handle tight curves and sharp corners that would snap standard blades. You can create jewelry, model parts, or custom nameplates without breaking a sweat. The secret is in the hardened steel and precise tooth geometry. Your projects will look proffesional and polished. Ready to upgrade your scroll saw game? Let’s dive into the best options available.
Product Comparison Table: 10 Best Metal Blades For Scroll Saw
| Image | Why We Like This Product | Editor’s Rating | |
 |
FOXBC 5-Inch Scroll Saw Blade Pin End Replacement for…
|
9.5 |
Read Review |
 |
FOXBC 5 Inch Plain End Scroll Saw Blade Set,…
|
9.3 |
Read Review |
 |
FOXBC Spiral Scroll Saw Blades – Plain End (#3…
|
9.1 |
Read Review |
 |
FOXBC Spiral Scroll Saw Blades – Plain End (#1…
|
8.9 |
Read Review |
 |
YullSorom 5-Inch 24TPI Scroll Saw Blade Pin End Replacement…
|
8.7 |
Read Review |
 |
YullSorom 5-Inch Scroll Saw Blade Pin End Replacement 48Pack…
|
8.6 |
Read Review |
 |
YullSorom 5 Inch Pin End Scroll Saw Blade 18…
|
8.4 |
Read Review |
 |
Scroll Saw Blades 5 Inch Plain End Scroll Saw…
|
8.2 |
Read Review |
 |
Pike 2/0 Jeweler’s Sawblades, Alloy Steel, Metal Compatible, 144-Pack
|
8.0 |
Read Review |
 |
Scroll Saw, 12pcs Scroll Saw Blades with Spiral Teeth…
|
7.8 |
Read Review |
Quick Review For Top 10 Metal Blades For Scroll Saw
FOXBC 5-Inch Scroll Saw Blade Pin End Replacement for Wen 3921 3923, Dremel, Craftsman, Penn State, Delta, Ryobi and All 15in.and 16in.Scroll Saw For Wood, High Carbon Steel – 48 Pack
The FOXBC 5-Inch Scroll Saw Blade Pin End Replacement 48 Pack is a solid choice if you need reliable blades for your scroll saw. This set gives you a total of 48 blades, split into four packs of 12, each with a different tooth count: 10 TPI, 15 TPI, 18 TPI, and 24 TPI. That means you have the right blade for everything from rough cuts to fine detail work, all in one box.
These blades are made from SK5 Japanese carbon steel, which is known for being corrosion-resistant and tough.
So they last longer than standard steel blades, even when you push them hard. They are designed for precise sawing of hard and soft wood, plastic, copper, and other soft metals. If you work with a mix of materials, this variety pack covers you without needing to buy seperate sets.
Installation is straight forward. The pin end design fits machines that require 5-inch pin end blades, so you just pop them in and tighten. No fuss, no complex adjustments.
They’re easy to handle and hold up well under use, which saves you time and frustration. The blades are highly durable, so you won’t be swapping them out constantly during a project.
This pack is a perfect replacement for a long list of scroll saws. It works with Wen 3921 and 3922, Dremel, Tacklife, Shop Fox, Skil, Rikon, Sears Craftsman, Penn State, Delta, Ryobi SC165VS, and all 15-inch and 16-inch scroll saws. If your machine takes these 5-inch pin end blades, you are good to go.
FOXBC 5 Inch Plain End Scroll Saw Blade Set, 36 Pack (28TPI, 12 TPI, 10TPI)
The FOXBC 5 Inch Plain End Scroll Saw Blade Set, 36 Pack is a collection of 36 blades built for precision cutting. This set gives you three different tooth counts, with 12 blades each for 28 TPI, 12 TPI, and 10 TPI. That means you have options for everything from very fine detail work to faster, more agressive cuts. The 28 TPI blades are best for tight, intricate curves and thin materials. The 12 TPI blades are a solid all-around choice for medium thickness woods and plastics.
The 10 TPI blades handle thicker stock and non-ferrous metals like aluminum or brass with less effort.
Every blade in this set is 5 inches long with a plain end, so they fit most standard scroll saws that use plain-end pinless blades. FOXBC designed these blades for the professional craftsman who needs sharp, long lasting tools. They are precision sharpened, which helps you cut fine, intricate shapes with less force and cleaner edges.
You wont have to fight the blade to follow a pattern or a tight radius. The teeth stay sharp longer than many budget options, so you can spend more time cutting and less time swapping blades.
Because the set includes three TPI options, you can switch blades based on your project without buying seperate packs. For cutting most woods, plastics, and non-ferrous metals, these blades perform well. The 28 TPI works great for veneers and thin plywood.
FOXBC Spiral Scroll Saw Blades – Plain End (#3 Metal Cutting)
The FOXBC Spiral Scroll Saw Blades – Plain End (#3 Metal Cutting) are a 12-pack of 5-inch blades designed for intricate cutting tasks where you need to move in any direction without turning the workpiece. These are plain end blades, so they fit into standard scroll saws and hand-held fret or jewelers saw frames. The key feature here is the spiral cutting edge, which gives you a full 360-degree cutting capability.
That means you can cut curves, angles, and tight joints in any direction—forward, backward, sideways, or even in circles—without stopping to rotate the material. This is a huge time saver when your working on detailed patterns or complex inlays. These blades are made from high carbon steel that has been hardened and tempered to stay sharp longer. The cutting speed and the finish you get will depend on the thickness of the material and the number of teeth per inch on the blade.
For this #3 size, it’s suitable for a wide range of materials. You can use them on wood, plastic, wax, non-ferrous metals like brass or aluminum, plaster, bone, horn, and more. They handle everything from softwoods to harder materials, so they are pretty versitile for crafters and woodworkers alike. One thing to keep in mind is that spiral blades leave a slightly rougher cut compared to regular scroll saw blades.
FOXBC Spiral Scroll Saw Blades – Plain End (#1 Fast Metal Cutting)
The FOXBC Spiral Scroll Saw Blades – Plain End (#1 Fast Metal Cutting) are a 12 pack of 5 inch plain end spiral blades that cut in all directions. They offer a full 360 degree cutting capability, which means you never have to turn the work piece. This is a real time saver when you are working on intricate curves and tight joints.
These blades are made from high carbon steel that has been hardened and tempered. This helps them stay sharp for longer compared to standard blades.
You will get more cuts per blade before needing to swap them out. The cutting speed and the quality of the finish you get will depend on two things: the thickness of the material you are cutting and the number of teeth per inch on the blade. Thicker materials and higher tooth counts will generally cut slower but leave a smoother edge. Thinner materials and fewer teeth will cut faster but might leave a rougher finish.
You can use these blades for a wide range of materials.
They work well on wood, plastic, wax, and non-ferrous metals. They also handle plaster, bone, and horn. This makes them a versitile choice for many different projects. They are designed for use in power scroll saws as well as hand-held fret and jewelers saw frames. Just make sure you have a plain end blade holder that accepts this type of blade.
One thing to keep in mind is that because the blade cuts in all directions, it can be a bit more agressive than a standard blade.
YullSorom 5-Inch 24TPI Scroll Saw Blade Pin End Replacement 24 Pack for W 3921 3923, Drem, Crafts, Del, All 15in.and 16in.Scroll Saw for Wood, High Carbon Steel
The YullSorom 5-Inch 24TPI Scroll Saw Blade Pin End Replacement 24 Pack is built for precision cutting on a range of popular machines. These blades are made from high-strength, wear-resistant manganese steel. That means they have good toughness and oxidation resistance, so they hold up well during extended use without rusting or snapping too quickly.
You get a pack of 36 blades, each with a 24 TPI (teeth per inch) count.
The 24 TPI is a fine-tooth configuration, which is ideal for detailed work. These blades are designed for sawing hard and soft wood, plastic, copper, and other soft metals. If you are working on intricate scroll work, model making, or hobby projects, the fine teeth give you a cleaner cut with less tear-out on the edges.
Installing them is straight forward. The pin-end design means you simply insert and lock them into your saw’s blade holder. No complex adapters or extra tools required.
They are easy to handle and highly durable, so you can swap them out quickly when needed. Just make sure your machine accepts a 5-inch pin-end blade.
These blades are compatable with many common scroll saw models. They work with the Wen 3921, 3922, and 3923. They also fit Dremel, TACKLI, Craftsman, Delta, and the Ryobi SC165VS. In general, they are designed for all 15-inch and 16-inch scroll saws that use pin-end blades.
YullSorom 5-Inch Scroll Saw Blade Pin End Replacement 48Pack for Wood, High Carbon Steel(24TPI, 18TPI，15 TPI, 10TPI 12pcs Each)
The YullSorom 5-Inch Scroll Saw Blade Pin End Replacement 48Pack for Wood is a solid set of blades built for precision cutting. Made from high-strength and wear-resistant manganese steel, these blades offer good toughness and oxidation resistance. That means they hold up well over time, even with regular use on different materials.
You get 48 blades in total, with 12 pieces each of four different TPI counts: 10, 15, 18, and 24. This variety lets you match the blade to your project.
The 24 TPI blades are great for fine, detailed cuts in thin wood or plastic. The 10 TPI blades handle thicker stock and faster cuts in soft metals like copper. The 15 and 18 TPI options sit in the middle, giving you a balance of speed and smoothness for general woodworking.
These blades work for precise sawing of hard and soft wood, plastic, copper, and other soft metals. If you are doing scroll work, intarsia, or small crafts, they can handle the job.
The pin end design makes them easy to install and remove. You do not need any special tools, just pop them in and tighten. They are highly durable, so you wont have to swap them out constantly.
The YullSorom blades are designed for machines that require a 5-inch pin end scroll saw. They fit popular models like the Wen 3921, 3922, and 3923, as well as Dremel, TACKLI, Craftsman, Delta, and Ryobi SC165VS. If your saw takes pin end blades, these should work fine.
YullSorom 5 Inch Pin End Scroll Saw Blade 18 TPI for Wood, High Carbon Steel 36 Pack
The YullSorom 5 Inch Pin End Scroll Saw Blade 18 TPI for Wood, High Carbon Steel 36 Pack is a solid choice if you need reliable blades for detailed cutting work. This set gives you 36 blades, each with 18 teeth per inch, which is a good middle ground for smooth cuts in a variety of materials.
You are getting a high carbon steel blade here, not just plain steel, so it holds up better under stress and stays sharp longer.
The material is made from high-strength and wear-resistant manganese steel. This gives the blade good toughness and oxidation resistance, meaning it won’t rust or dull as fast as cheaper options. If you are sawing hard or soft wood, plastic, copper, or other soft metals, these blades can handle it.
The 18 TPI pattern is fine enough for decent detail work but not so fine that it slows you down on thicker stock. You can expect a clean cut edge with minimal tearout on most woods.
Installation is straightforwards. These are pin end blades, so they fit machines that require a 5 inch pin end scroll saw. That includes models like the Wen 3921, 3922, and 3923, as well as Dremel, TACKLI, Craftsman, Delta, and Ryobi SC165VS. The pins make swapping blades quick, no special tools needed.
Scroll Saw Blades 5 Inch Plain End Scroll Saw Blade Scroll-Saw Blades for Wood 24 Pack (28TPI, 10TPI)
The Scroll Saw Blades 5 Inch Plain End Scroll Saw Blade Scroll-Saw Blades for Wood 24 Pack (28TPI, 10TPI) gives you a solid set of blades for detailed cutting work. This pack includes 24 blades total, with 12 blades at 28 TPI and 12 blades at 10 TPI. That means you have options right out of the box.
Each blade is 5 inches long with a plain end design. The ends are flat, so they fit most standard scroll saws and jigsaws without any issues.
You won’t need adapters or special chucks to get them working. Just pop one in and start cutting.
The blades are precision-sharpened for clean, accurate cuts. If you work on intricate patterns or tight curves, the 28 TPI blades are your best bet. They handle thin wood, plastic, and even some non-ferrous metals with less tear out. For thicker material or faster cuts, switch to the 10 TPI blades.
They remove material quicker and work well on softer woods and thicker plastics.
Construction is from high-quality carbon steel. These blades resist wear and hold their edge longer than standard steel blades. You won’t be swapping them out as often during long projects. They stay sharp through repeated use, which saves you time and frustration.
This set is designed for professional craftsmen, but it works just as well for hobbyists.
Pike 2/0 Jeweler's Sawblades, Alloy Steel, Metal Compatible, 144-Pack
The Pike 2/0 Jeweler’s Sawblades, Alloy Steel, Metal Compatible, 144-Pack is a solid choice if you do a lot of detailed cutting work. These blades are made from alloy steel, which gives them a good balence of strength and flex. You wont have to worry about them snapping the moment you apply a little pressure, but they are still thin enough for intricate curves and tight corners.
Since these are 2/0 size blades, they are on the finer side.
That makes them ideal for cutting softer metals like brass, copper, or silver. If you work with jewelry or small metal components, this pack should cover a wide range of your projects. The 144-pack means you have plenty of backups. You can go through a lot of blades when you are sawing metal, so having a bulk supply saves you from running to the store mid-project.
One thing to keep in mind is that these blades are not designed for thick steel or heavy gauge material.
They work best on thin sheet metal up to about 1mm. For thicker stock, you would need a larger blade size. But for what they are made for, they perform realy well. The teeth are sharp right out of the pack, and they cut smoothly with less binding than some other brands I have used.
You should also know that these blades need proper tension in your saw frame. If they are too loose, you will get wobbly cuts and more breakage.
Scroll Saw, 12pcs Scroll Saw Blades with Spiral Teeth Fine Cut Scroll Saw Blades Pin End for Wood Metal Plastic Cutting Sawing Carve(#7)
The Scroll Saw 12pcs Scroll Saw Blades with Spiral Teeth Fine Cut Scroll Saw Blades Pin End for Wood Metal Plastic Cutting Sawing Carve(#7) is a practical set designed for detailed cutting work. Each blade is made from high carbon steel, processed for durability. This gives them good hardness and strength, so they hold up during use without bending too easily.
You get twelve blades in the package.
That is handy because you can swap out a blade when it gets dull or breaks without stopping your project. The set includes different sizes, and picking the right one depends on what you are cutting. For metal, the recomendation is to use the #1, #2, or #3 blades. These are finer and better suited for harder materials. If you are working with wood, the #4, #5, #6, and #7 blades are a good fit. The #8 blade works well for cutting plastic.
This variety helps you match the blade to the workpiece thickness, which makes the cutting process smoother.
The teeth on these blades are sharp and have some elasticity. This feature helps increase cutting speed, so you don’t have to push as hard. The spiral tooth design allows for cutting in multiple directions, which is usefull for intricate scroll work or carving. You can make turns and curves without needing to reposition the workpiece.
Metal Blades For Scroll Saw Buying Guide
Metal blades for scroll saw cut thin sheet metal with intricate detail work. If you’ve ever tried to cut a delicate pattern in aluminum or brass with a standard blade, you know teh frustration. The blade snaps, the metal warps, or the cut looks like a mess. That’s where these specialty blades come in. They are designed to handle the hardness of metal while still giving you the precision you need for scrollwork. Before you grab just any pack, let’s break down what makes a good metal-cutting blade for your saw.
Tooth Configuration and TPI
The number of teeth per inch (TPI) matters a lot here. For thin sheet metal, you want a high TPI, usually between 20 and 32. More teeth mean a smoother cut and less chance of the blade grabbing the metal. A coarser blade will snag and tear. Think of it like a fine-toothed saw versus a coarse one for woodworking. For metal, fine is always better. Also, look for blades with raker or skip-tooth designs. They clear out the metal dust better, preventing the blade from clogging and overheating.
Blade Material and Coating
Not all blades are made the same. Standard steel blades dull fast against metal. You want bi-metal or carbide-tipped blades instead. They stay sharp longer. Some blades have a special coating, like titanium nitride or a carbon finish. These coatings reduce friction and heat buildup. That means less chance of ruining your project. A coated blade also feels smoother as it cuts. So if you are cutting a lot of pieces, a coated bi-metal blade will save you time and money in the long run.
Thickness and Size Compatibility
Your saw needs to fit the blade. Check the blade length and pin or pinless design. Most scroll saws use 5-inch blades, but some older ones need 6-inch. Pinless blades let you cut tighter corners, which is huge for detailed metalwork. The blade thickness also matters. Thinner blades bend easier and cut tight curves, but they break faster. Thicker blades are stronger but less flexible. For thin metal, a thinner blade (around 0.02 inches) works great. Just don’t push to hard when cutting.
Frequently Asked Questions About Metal Blades For Scroll Saw
What type of metal can I cut with a scroll saw?
You can cut soft metals like aluminum, brass, and copper. Thin sheet metal up to about 1/16 inch works best. Steel and stainless steel are much harder and require special blades. For those, you need a bi-metal or carbide blade. Always check teh blade’s specifications before you start.
How do I choose the right blade for metal cutting?
Look at the TPI, or teeth per inch. For thin metal, you want a fine blade with 20 to 32 TPI. This gives cleaner cuts. For thicker metal, go with a courser blade around 14 to 18 TPI. Also check the blade material. High-speed steel works for soft metals. Carbide or bi-metal blades handle harder stuff.
Do I need to use lubrication when cutting metal?
Yes, it helps a lot. Lubrication keeps the blade cool and reduces friction. This prevents the metal from heating up and warping. You can use cutting oil, wax, or even a little water. Just apply it lightly to the cut line. It also makes the blade last longer.
Can I use a standard wood-cutting blade for metal?
Not really. Wood blades have larger teeth and aren’t made for metal. They can snap quickly or give you rough cuts. Metal blades are harder and have finer teeth. Using the wrong blade can damage your workpiece or your saw. Always pick a blade made for metal.
How fast should my scroll saw run for metal?
Slower speeds are better. Most scroll saws have adjustable speed settings. For metal, start around 600 to 800 strokes per minute. This gives you control and reduces heat. Faster speeds can cause blade breakage or burn the metal. Test on a scrap piece first.
Why does my blade keep breaking when I cut metal?
This can happen for a few reasons. You might be pushing the material to fast. Let the blade do the work. Check your tension. Too loose or too tight can snap a blade. Also make sure you’re using the right blade for the metal thickness. Lubrication helps too.
Can I cut curves in metal with a scroll saw?
Yes, you can. Use a narrow blade for tight curves. A blade with a width of 1/8 inch or less works best. Take your time and make slow turns. For sharp corners, drill a hole first and thread the blade through. This gives you more control and cleaner results.
Our Verdict
You now have the information to choose wisely. Look for blades that match your material thickness and the detail you want. A good blade makes a huge difference in your cuts. It saves you time and frustration. Remember to check the teeth per inch for clean results. Your scroll saw will run smoother, and your projects will look better. Don’t be afraid to try a few options until you find your favorite. You will see the results right away in your work.
Achieve detailed metalwork by selecting the best metal blades for scroll saw. Keep your saw in good shape, and change blades when they get dull. This simple step keeps your cuts accurate. You will enjoy working with metal more when you have the right tool. So pick your blades with care, and start your next project with confidence. Your skills will show through in every piece you create. The right blade is waiting for you.