Table saw jointer jigs create straight edges by running boards against a fence. If you’ve ever wrestled with cupped or twisted wood, you know how frustrating it can be. That’s where a jointer jig for table saw comes in handy. It transforms your standard saw into a precision tool that flattens edges like a charm. You don’t need a fancy standalone jointer—just this clever add-on and a little practice.
This jig works by holding your board steady while the table saw blade trims off any high spots. It’s a simple setup, but it makes a huge difference in your woodworking projects. You’ll get cleaner glue-ups and tighter joints without the headache. Honestly, it’s a game-changer for any workshop. Just make sure your fence is square before you start—or you’ll end up with a wonky edge.
Product Comparison Table: 10 Best Jointer Jig For Table Saw
| Image | Why We Like This Product | Editor’s Rating | |
 |
GRR-RIPPER+ by Microjig. Includes SafeRip Kit. Fully Adjustable 3D…
|
9.6 |
Read Review |
 |
MICROJIG GRR-RIPPER GR-100 3D Table Saw Pushblock, Yellow
|
9.4 |
Read Review |
 |
POWERTEC Table Saw Safety Accessories 6Pcs Set – Table…
|
9.2 |
Read Review |
 |
Zebekk Push Block for Table Saws, Router Tables, Band…
|
9.0 |
Read Review |
 |
MICROJIG GRR-RIPPER 2GO Push Block for Routers, Jointers, Band…
|
8.8 |
Read Review |
 |
POWERTEC Table Saw Tapering Jig for Angle Cutting |…
|
8.7 |
Read Review |
 |
AccuRip Pro Thin Rip Jig – Table Saw Thin…
|
8.5 |
Read Review |
 |
KETIPED 2 Pack Crosscut Sled for Table Saw, Miter…
|
8.3 |
Read Review |
 |
POWERTEC Table Saw Tapering Jig, Small Parts Taper Jig…
|
8.1 |
Read Review |
 |
POWERTEC 71395 Taper/Straight Line Jig for Table Saws with…
|
7.9 |
Read Review |
Quick Review For Top 10 Jointer Jig For Table Saw
GRR-RIPPER+ by Microjig. Includes SafeRip Kit. Fully Adjustable 3D Push Block for Table Saws, Router Tables, Band Saws, and Jointers. (SKU: GR-100+) Yellow/Green
The Microjig GRR-RIPPER+ with SafeRip Kit is a fully adjustable 3D push block designed for table saws, router tables, band saws, and jointers. It comes in a yellow and green color scheme, and it is built to protect your hands while giving you serious control over your material. If you work with wood or plastics, this tool directly addresses the two biggest risks: kickback and accidental blade contact.
Lets start with the table saw pushblock function.
The GRR-RIPPER+ applies powerful downward, inward, and forward pressure all at once. This three-directional force is what virtually eliminates kickback. It keeps the material flat against the table, pressed against the fence, and moving forward smoothly. You get cleaner cuts with less burning because the material never lifts or twists during the cut.
It also controls the whole piece from start to finish, so theres no dangerous loose end flopping around.
The enhanced SafeRip Kit is a major upgrade. It guarantees precise material handling and prevents accidental blade contact. This means you can make faster, cleaner cuts on your table saw without worrying about your fingers getting too close.
MICROJIG GRR-RIPPER GR-100 3D Table Saw Pushblock, Yellow
The Microjig GRR-RIPPER GR-100 3D Table Saw Pushblock, Yellow is designed to give you complete control over your workpieces while keeping your hands safe. It is a single tool that changes how you approach cutting on the table saw, router table, jointer, and band saw. The main job of this pushblock is to protect your hands and prevent kickback like never before. You get a powerful high-friction durable grip that holds the stock extremly well.
This grip means you can push material through the blade without it slipping or shifting.
Precision cutting and control is a big part of what this tool does. You can rip material down to just 1/4 inch with confidence. That is very thin stock, and this pushblock lets you handle it safley. The design includes 3-Directional Force for total control of the workpiece. This means you are pushing down, forward, and against the fence all at the same time.
Your material stays flat, tight to the fence, and moving forward without any chance of it lifting up.
The pushblock is fully adjustable for easy handling. You can change the settings to fit the size of the stock you are cutting. Whether you are working with a large board or a very small piece of wood, this tool adapts to the job. It works with small stock safely on the table saw, router table, jointer, and band saw. That gives you a lot of flexibility in your shop.
POWERTEC Table Saw Safety Accessories 6Pcs Set – Table Saw Push Block, Push Stick & Taper Jig – Wood Workng Tools and Safey Accessories for Router Table, Bandsaw & Jointer (71785)
The POWERTEC Table Saw Safety Accessories 6Pcs Set (model 71785) gives you six different tools to keep your hands safe while working with saws, routers, and jointers. This set includes one table saw taper cutting jig, one long hold down push block, two short hold down push blocks, one Safe V Stick, and one straight push stick. Each piece serves a specific purpose, so you can pick the right one for the job.
The taper cutting jig works as an angled guide for your table saw.
It helps you make long rip cuts at angles ranging from 1 inch per foot (about 4.8 degrees) up to 3 inches per foot (15 degrees). This is handy for projects like building kitchen table legs, chairs, wooden racks, wedges, or anything that requires slight tapers. The jig is easy to set up and gives you consistent results every time.
The push blocks are designed to keep your hands away from the blade while providing firm control.
They let you apply steady downward pressure on the workpiece as it moves through the cutter. This reduces bounce or chatter, which means cleaner cuts and less risk of kickback. The long block is great for larger pieces, while the two short blocks work well for smaller stock or tight spaces. You can use these blocks for face jointing, ripping plywood, routing, and general woodworking tasks.
The push sticks offer another layer of safety.
Zebekk Push Block for Table Saws, Router Tables, Band Saws & Jointers – Cuts Safe – Easy to Assembly
The Zebekk Push Block for Table Saws, Router Tables, Band Saws & Jointers – Cuts Safe is a simple tool that makes your workshop work a lot less stressful. If you have ever felt nervous feeding a narrow piece of wood through a saw, this push block is designed to help with that exact problem.
First, it focuses on safety. The bottom of the block uses a non-slip material that grips the wood firmly.
This gives you multidirectional force control, meaning you can guide the workpiece without it sliding around. That grip helps protect your hands and reduces the risk of kickback while cutting. You get to keep your fingers well away from the blade, which is always the goal.
Assembly is as easy as it gets. There is no frustrating setup or confusing instructions. You just install the handle and the side parts, and you are ready to go.
It takes less than a minute, and you don’t need any extra tools. It is one of those rare tools that works right out of the box.
For precision, the top sliding adjustment design lets you control the cut width easily. You can make narrow rip cuts down to 1/4 inch ripping. This is perfect for when you need to trim a tiny sliver off a board or make exact measurements.
MICROJIG GRR-RIPPER 2GO Push Block for Routers, Jointers, Band and Table Saws, Woodworking Tool, Extreme Grip, GR2-GO, Yellow/Green
The MICROJIG GRR-RIPPER 2GO Push Block is a woodworking tool designed to help you feed material safely through table saws, router tables, jointers, and band saws. It focuses on grip, control, and kickback prevention right out of the box.
This push block has a Green GRIP non-slip surface that gives you strong gripping power. It makes the tool a dependable table saw push block for accurate cutting.
Your hands stay firmly in place, so you can focus on the cut instead of worrying about slipping. The design comes from the USA and is build to handle tough workshop conditions.
Kickback is a real danger when using power saws and jointers. The GRR-RIPPER 2GO tackles this with a precision leg and tunnel system. This system feeds and controls both sides of the cut at the same time. It virutally eliminates kickback while giving you superior control over the workpiece.
You get a safer way to push material through without the fear of it flying back at you.
This tool works as a multipurpose woodworking tool. Use it on table saws, router tables, jointers, and band saws. The high-visibility yellow and green colors make it easy to spot on your workbench. It has an ergonomic handle design that feels comfortable in your hand.
POWERTEC Table Saw Tapering Jig for Angle Cutting | 24-Inch Lightweight Aluminum Rails and Laser Engraved Scale, 15 Degrees of Taper, 1 PK (71035V)
The Powertc Table Saw Tapering Jig 71035V is a practical tool for making angled cuts on your table saw. It comes with 24-inch aluminum rails, work stops, an ergonomic handle, a lock knob, and a laser etched scale. The kit includes one jig, ready to use right out of the box.
Its main job is to guide your workpiece for precise taper cuts. You can ajust the angle from 1 inch per foot, which is about 4.8 degrees, all the way up to 3 inches per foot, or 15 degrees.
This makes it easy to cut long, gradual angles for things like furniture legs or wedges. The work stops help keep your material stable as you push it through the blade.
This jig is versatile for many woodworking projects. It works great for building kitchen table legs, chairs, wood shelves, and wedges. If you need a slight taper on a board or a more dramatic angle, the jig handles it without fuss.
The adjustable range covers most common woodworking needs, so you can use it for both simple repairs and larger builds.
The construction is premium but not heavy. It uses extruded aluminum that is durable and lightweight. The material resists corrosion, so it wont rust or degrade over time. The strength-to-weight ratio is high, meaning it can handle heavy-duty use without adding bulk to your workspace.
AccuRip Pro Thin Rip Jig – Table Saw Thin Strip Cutting Jig with NoPlay Expandable Miter Bar, Dual Lock Precision Adjustment, Reversible Metric and Imperial Index Plate
The AccuRip Pro Thin Rip Jig is a table saw accessory built for one thing: cutting thin strips of wood with real precision. It starts at zero. That is the key feature. The top bearing indexes directly off the saw blade tooth, so you are not guessing or measuring from a fence. You set it against the blade, lock it, and cut. This is great for cabinetry, luthier work, veneers, inlays, and fine woodworking where a fraction of a millimeter matters. The jig uses a NoPlay Expandable Miter Bar.
This bar has adjustable expansion ribs that push outward to fill the miter slot. It removes side to side wiggle completely. You get a smooth, guided slide in any standard or U shaped miter slot. No more drifting or slop ruining your cut. Setup is straight forward with the Dual Locking Adjustment System. There is a center locking knob and a secondary in/out lock. This keeps the jig fixed during setup and while cutting.
Once you zero it and lock it, the measurement stays accurate through repeated passes. If you need to cut multiple identical strips, this jig makes it fast and reliable. The index plate is reversible. Flip it to see either imperial or metric calibration marks. The markings read from zero left toward the blade, so setup is intuitive no matter which system you prefer. It is a simple, direct way to measure. You also get flexibility with miter slot compatibility.
KETIPED 2 Pack Crosscut Sled for Table Saw, Miter Slot Runners, 3/4" x 3/8" x 17" Premium UHMW Miter Bar with Predrilled Holes & Screws Ideal for U Tracks, Router Table, Bandsaw, Coping Sled,MGJ-105W
The KETIPED 2 Pack Crosscut Sled for Table Saw, Miter Slot Runners, 3/4″ x 3/8″ x 17″ Premium UHMW Miter Bar with Predrilled Holes & Screws Ideal for U Tracks, Router Table, Bandsaw, Coping Sled, MGJ-105W is made from a material that really stands up to shop work. It is ultra-high molecular weight polyethylene, or UHMW for short. This stuff is tough. It resists wear, lubricates itself, and won’t get brittle or break down over time.
You don’t have to worry about it reacting to moisture or temperature changes in your workshop.
The design is straight forward. Each bar is 17 inches long, 3/4 inch wide, and 3/8 inch thick. That is a standard size that fits most common miter slots. There are five pre-drilled and countersunk holes along each bar. They are spaced precisely so your screws sit flush. No rubbing against your table saw surface or other parts of your sled.
The package includes the two bars and some self-tapping screws to get you started.
One of the best things about these bars is that they don’t act like wood. Wood can swell or shrink with humidity. Wood also leaves sawdust stuck to it sometimes. UHMW is different. It stays the same size no matter the weather. It also cleans up easy. Just wipe it down. The surface has a low coefficient of friction. That means it slides smooth and easy in your slot.
POWERTEC Table Saw Tapering Jig, Small Parts Taper Jig with 3/4" x 3/8" Miter Bar, Adjustable Hold Down Clamp, Non-Slip Grip Strips, Ergonomic Handle – Table Saw Jig Accessories (71875)
The POWERTEC Table Saw Tapering Jig, Small Parts Taper Jig with 3/4″ x 3/8″ Miter Bar, Adjustable Hold Down Clamp, Non-Slip Grip Strips, Ergonomic Handle – Table Saw Jig Accessories (71875) is a straightfoward tool for making precise angled cuts on your table saw. It comes with a 12-inch miter bar, a base, an adjustable fence, knobs, hold down clamps, a tape measure, abrasive grip strips, T-bolts, hardware screws, washers, and even a mini screw driver.
Everything you need to start is in the box, so you don’t have to hunt for extra parts.
This jig’s main job is cutting tapers, like for chair legs or table legs. But you can also use it as a stable straight line ripping jig for small parts. If you get creative, you might find other uses for it in your workshop. The base is made from MDF with a melamine coating on both sides, measuring 11-1/2 inches by 7-5/16 inches by 1/2 inch. It feels solid and durable. The design is safe and easy to use.
Indexing marks on the jig help you set angles quickly, and the knobs and hold down clamps keep your workpiece from shifting during the cut. The abrasive grip strips add extra stability, so you don’t have to worry about slipping. Detailed instructions are included, making it workable for beginners and pros alike.
Versatility is a key point here.
POWERTEC 71395 Taper/Straight Line Jig for Table Saws with 3/4” Wide by 3/8” Deep Miter Slot
The POWERTEC 71395 Taper/Straight Line Jig for Table Saws with 3/4” Wide by 3/8” Deep Miter Slot is a practical tool for accurate woodworking cuts. This jig comes fully assembled with everything you need to get started. The kit includes a 36 inch miter bar, a sturdy base, an adjustable fence, a push knob, hold down clamps, a tape measure, abrasive grip strips, T-bolts, hardware screws, washers, and even a mini screw driver. You won’t need to buy extra parts. It serves two main functions.
First, it works as a taper cutting jig for your table saw. Second, it operates as a stable straight line ripping jig. Your creativity is the limit with this design. You can use it for cutting tapered compound angles, straight line ripping, making handmade furniture, building chair legs, tables, custom shelves, or base cabinets. It fits tight and securely in any standard 3/8 inch by 3/4 inch miter slot. The build quality is premium.
The base measures 32 inches by 7-7/8 inches and is 1/2 inch thick. It uses MDF construction with a melamine coating on both sides. This makes it smooth and durable. The design is safe and easy to use. It features indexing marks for easy angle setting. An ergonomic anti-slip push knob gives you better control. The adjustable fence and hold down clamps prevent your workpiece from shifting. Abrasive grip strips help stabilize the wood.
Jointer Jig For Table Saw Buying Guide
A jointer jig for table saw lets you square edges without a jointer. That’s a big deal if you have limited space or a tight budget. Instead of buying a separate machine, you use your table saw to get the same result. It’s smart, simple, and cost-effective. But not all jigs work the same. Some slide smoothly, others catch and bind. Some adjust easily, others frustrate you with loose screws. So how do you pick the right one?
Material and Build
Look for jigs made from aluminum or thick steel. Plastic ones flex under pressure and ruin your cuts. You want something that stays rigid when you push wood through. Check the fence too—if it bends, your edge won’t be square. A solid build means consistent results every time.
Adjustability and Setup
Does the jig let you dial in the angle easily? Some have knobs, others use hex wrenches. The best ones have micro-adjustments for fine tuning. You dont want to fight with the hardware while holding a board. Quick setup saves time and keeps you focused on the woodworking.
Fence Length and Support
Longer fences support longer boards. If you joint a 6-foot piece, a short fence leaves it wobbling. That leads to uneven edges. Look for a fence at least 30 inches long. Some jigs even come with extension options. It’s a simple factor that makes a huge difference in accuracy.
Clamping System
How does the jig hold your board? Cam clamps work fast, but screw clamps grip tighter. Some jigs use toggle clamps for quick changes. Test the mechanism if you can. A loose board is dangerous and ruins the cut. You want a clamp that holds firm without slipping.
Compatibility with Your Saw
Not every jig fits every table saw. Check the miter slot width and depth. Some saws have T-slots, others have standard slots. Measure before you buy. A jig that doesn’t fit is just a waste of money. Read the specs carefully and compare them to your saw’s manual.
Frequently Asked Questions About Jointer Jig For Table Saw
What is a jointer jig for a table saw, and why would I need one?
A jointer jig is a simple tool that helps you square up the edges of your wood. It lets your table saw do the job of a jointer. You need it when you want straight, flat edges for glue-ups or projects. It saves you from buying a separate jointer machine.
How does a jointer jig work with my table saw?
The jig rides along your saw’s fence or miter slot. You secure your board to the jig. Then you push the jig and board through the blade. The jig keeps the board steady, so the blade cuts a perfectly straight edge. It’s that simple.
What should I look for when buying a jointer jig?
Look for a sturdy build. Metal or high-quality plastic is best. Check that it fits your table saw’s slots or fence. A good jig has adjustability for different board widths. Also, make sure it has a secure clamping system. You don’t want your wood slipping.
Can I use any jointer jig on my table saw?
Not all jigs are universal. Some are made for specific saw models. Measure your table saw’s slots and fence before buying. Most jigs work with standard 3/4-inch miter slots. But always double-check the product specs to be sure.
Is using a jointer jig safe for beginners?
Yes, it is safe if you follow basic table saw rules. Always use a push stick and keep your hands clear. The jig adds stability, which reduces kickback risk. Start with small pieces to get comfortable. Safety first, always.
Do I need a special blade for a jointer jig?
No special blade is required. A standard combination blade works fine. But a sharp blade gives you cleaner results. Dull blades can cause tear-out or rough edges. Keep your blade sharp for the best performance.
How much does a good jointer jig cost?
Prices range from $30 to $100. Cheaper jigs may work, but they often lack durability. Invest in a mid-range jig for reliable use. It pays off in the long run.
Can I build my own jointer jig instead of buying one?
Yes, you can. Many woodworkers make one from plywood and a bolt. It requires some skill and precise measurments. But a store-bought jig is often easier and more accurate for beginners.
Last Thoughts Before You Buy
This article has covered the essential information you need to make an informed decision. We’ve examined the key features and considerations that matter most when choosing the right product for your needs.
When thinking about jointer jig for table saw, remember to focus on what works best for your specific situation. The ideal choice depends on your individual requirements and preferences. Take your time to evaluate all the options carefully.