Plywood jigsaw blades cut upward to minimize splintering on the visible surface layer. That’s why you need a specialized jigsaw blade for plywood if you want clean, chip-free cuts. Regular blades tear through the veneer, leaving rough edges that ruin your project. But with the right blade, you get smooth results every time. It’s all about the tooth design and cutting direction—upward cuts protect the top layer while the bottom might fray a little, but that’s hidden from view.
So what should you look for in a blade that actually delivers? You want high-quality steel and sharp, fine teeth. The wrong choice leads to frustration and wasted material. Trust me, I’ve been there. A good blade makes your saw glide like butter through even the trickiest plywood. Ready to find your perfect match? Let’s dive into the top options on the market. Quick tip: Avoid cheap blades—they dull fast and cause tear-out.
Product Comparison Table: 10 Best Jigsaw Blade For Plywood
| Image | Why We Like This Product | Editor’s Rating | |
 |
50 Piece Contractor Jigsaw Blades Set with Storage Case,…
|
9.9 |
Read Review |
 |
Jigsaw Blades, 10 Piece Jig Saw Blades, Assorted T-Shank…
|
9.7 |
Read Review |
 |
Craluuur 30PCS Jigsaw Blades Set, Assorted T-Shank Jig Saw…
|
9.4 |
Read Review |
 |
Bosch TPW005 5 pc. T-Shank Jig Saw Blade Set…
|
9.2 |
Read Review |
 |
Bosch T5002 10 pc. T-Shank Jig Saw Blade Set…
|
9.0 |
Read Review |
 |
Diablo Bi-Metal Jig Saw Blades for Ultra Fine Finish…
|
8.7 |
Read Review |
 |
Diablo High Carbon Steel Jig Saw Blades for Wood…
|
8.5 |
Read Review |
 |
14 PCS U-Shank Jig Saw Blade Set, Jigsaw Blades…
|
8.3 |
Read Review |
 |
EZUVITA 25-Piece Jigsaw Blades Set with Storage Case–CR-V&HSS Steel,…
|
8.0 |
Read Review |
 |
20PCS T Shank Jigsaw Blades Tool for Wood Plastic…
|
7.8 |
Read Review |
Quick Review For Top 10 Jigsaw Blade For Plywood
50 Piece Contractor Jigsaw Blades Set with Storage Case, Assorted T-Shank Jig Saw Blades for Wood, Plastic and Metal Cutting(T118A,T118B,T101AO,T101B,T101BR,T144D)
The 50 Piece Contractor Jigsaw Blades Set with Storage Case, Assorted T-Shank Jig Saw Blades for Wood, Plastic and Metal Cutting(T118A,T118B,T101AO,T101B,T101BR,T144D) is a straight forward tool kit built for getting the job done. You get fifty blades in one case, so you are not running to the store everytime you need a fresh edge.
This set covers wood, plastic, and metal, which means most of your cutting projects are already covered.
The blades use a T-shank design, so they fit most modern jigsaws without any trouble. You do not need to worry about compatibility with older U-shank saws, but for standard tools, these click right in and hold tight. The six included types handle different materials. The T118A and T118B are for metal, letting you cut through sheet metal and mild steel without burning out the blade.
The T101AO and T101B are for wood, with the AO version giving you a clean, splinter-free cut on plywood or veneer. The T101BR cuts reverse teeth for a smooth top surface, which is handy when you care about the look of the cut line. The T144D is a heavy duty blade for thicker wood or aggressive cuts.
The storage case is a simple plastic box. It keeps the blades organized and stops them from rusting or getting bent in your tool bag.
Jigsaw Blades, 10 Piece Jig Saw Blades, Assorted T-Shank jig Saw Blades for Wood, Metal and Plastic Cutting(T111D, T101AO, T101BR, T101D, T101B, T118A, T118B, T144D, T244D,T111C)
The Romeda 10 Piece Jigsaw Blades Assorted T-Shank set is a practical choice for anyone who does a bit of everything. Instead of buying individual packs, you get ten different blades in one package. This covers wood, metal, and plastic without needing to guess which one to pick up.
Each blade has a specific job. For metal cutting, use the T118A or T118B. For clean cuts in wood, the set includes the T101AO, T101D, T101B, and the T101BR.
If you need to cut wood fast, the T144D, T244D, and T111D are your go-tos. For basic wood cutting, the T111C is there. It is a simple system. You just grab the blade that matches your material.
The T-shank design is a big plus. It gives you a firm grip and good stability while you work. Installing them is easy because no screws are needed. You just slide the blade in and it locks.
This also helps reduce the chance of breakage at the tang, which is a common issue with other blade types.
Romeda makes these blades from SK5 high carbon steel. They claim this steel is 50 times more durable than CRV steel. That might sound like a lot, but what it means for you is the blades stay sharp longer. They cut cleanly and quickly, and you won’t need to swap them out as often.
Craluuur 30PCS Jigsaw Blades Set, Assorted T-Shank Jig Saw Blades for Wood, Metal & Plastic Cutting(T101AO, T101B, T101BR, T118A, T118B, T144D, T244D, T111C, T127D)
The Craluuur 30PCS Jigsaw Blades Set gives you a solid mix of blades for cutting wood, metal, and plastic. With thirty pieces total, you get nine different blade types, so you can handle most jobs around the shop or on a DIY project without running out to buy more.
You get four of the T101AO blades, four T101B, and four T101BR for clean wood cutting. For faster cuts, there are four T144D blades, three T244D, and three T111C.
If you need to cut metal, the set includes three T118A and three T118B blades. And there are two T127D blades specifically for aluminum. That covers a lot of ground for one box.
All these blades use a standard T-shank design. That means they fit most modern jigsaws, giving you a secure grip and stable cutting. They are easy to install and quick to swap out when you need to change jobs.
No fussing with complicated adapters.
The blades are made from high-carbon steel and high-speed steel. This combo gives you good wear resistance and flexibility. The wood blades hold up well and resist breaking, while the metal blades keep thier sharp edge longer. You won’t be replacing them after every few cuts.
For the finish, these blades have precision-ground teeth and some reverse-cut designs.
Bosch TPW005 5 pc. T-Shank Jig Saw Blade Set for Pro-Wood
The Bosch TPW005 5 pc. T-Shank Jig Saw Blade Set for Pro-Wood is a targeted collection of five blades built for specific cutting tasks. This set isn’t a grab-bag of general blades. Each blade has a dedicated job, so you can pick the right one for your material without guesswork.
The set includes a T101AO Reverse Pitch Clean for Wood blade. Its unique reverse-tooth design pulls sawdust down, produceing a clean top surface with minimal splintering.
If you are cutting wood where the show-face matters, this is your go-to. You also get a T101BF Clean for Hardwood blade. It is designed for clean, straight cuts in dense materials like hardwood, OSB, and plywood. It helps prevent tear-out on those tougher surfaces.
For laminate flooring and other abrasive materials, the set includes a T101BIF Laminate blade. It handles straight or gently curved cuts without chipping the brittle surface.
The T101BR Clean for Wood blade features pointed teeth that reduce splintering on both sides of the workpiece. That is usefull for general wood cutting where you want a decent finish on the top and bottom. Finally, the T101C Basic for Wood blade is a solid all-rounder for everyday wood cuts.
All five blades use a T-Shank design. This provides maximum grip and stability in the saw, and it fits over 90% of current jig saw makes and models.
Bosch T5002 10 pc. T-Shank Jig Saw Blade Set for Wood and Metal
The Bosch T5002 10 pc. T-Shank Jig Saw Blade Set for Wood and Metal is a practical kit for anyone who needs to cut through common materials without running to the store for each new project. This set gives you ten blades in total, all using the universal T-shank design that fits most modern jigsaws. You get a nice mix of blades right out of the box, so you can handle general woodworking and metal cutting tasks from the start.
The set includes two T101B Clean for Wood blades.
These are great for making smooth, splinter-free cuts in softwood and hardwood. They work well for straight cuts and gentle curves where you want a clean edge. You also get two T144D Speed for Wood blades. These are designed for faster, rougher cuts in wood. If you are cutting through thicker boards or just need to get the job done quickly, these are your go-to choice. For more detailed work, there are two T119BO Basic Scrolling blades.
These are thinner and let you cut tight curves and intricate shapes in wood. They are perfect for craft or hobby projects where precision matters.
On the metal side, the set includes two T118A and two T118B Basic for Metal blades. The T118A blades are for cutting thin metal sheets and non-ferrous materials like aluminum or copper. The T118B blades are a bit more rugged and handle thicker ferrous metals, such as steel or iron.
Diablo Bi-Metal Jig Saw Blades for Ultra Fine Finish Top and Bottom Wood Cutting – 4-5/8", 12 TPI, 5-Pack – DJT308BFP5
The Diablo Bi-Metal Jig Saw Blades for Ultra Fine Finish Top and Bottom Wood Cutting – 4-5/8″, 12 TPI, 5-Pack – DJT308BFP5 is a set of blades designed for clean, precise cuts in wood. If you need a smooth finish on both sides of your material, these blades are worth a close look. They are built for speed and accuracy, not for making noise.
One of the key features is the unique tooth arrangement. The teeth face opposite directions at each end of the blade.
This design lets you cut from the top or the bottom without leaving rough edges on either side. You get an ultra-fine finish on both surfaces, which is a big help if you’re working on visible parts of a project like trim or cabinet doors. The blade itself is 4-5/8 inches long with 12 teeth per inch, so it’s suited for thin to medium thicknesses of wood.
Durability is a strong point here.
The cutting edge is ultra-hardened, which gives you up to five times longer blade life compared to standard bi-metal blades. That means less time swapping out dull blades, especially in tough applications like cutting through plywood or hardwood with knots. The tooth technology is optimized for speed and ease, so the blade cuts through material effortly. You get a clean, professional finish without having to push hard or fight the saw.
Compatibility is universal.
Diablo High Carbon Steel Jig Saw Blades for Wood – Fine Finish Wood Cutting – High Carbon Steel Tooth Design – T-Shank – 4" Length, 10 TPI, 5-Pack – DJT101B5
The Diablo High Carbon Steel Jig Saw Blades DJT101B5 are built for clean wood cutting. If you need a fine finish on your cuts, these blades are a solid option. They come in a 5-pack, each blade is 4 inches long with 10 teeth per inch. That makes them perfect for softwood and plywood projects.
The tooth design is the real star here. It is optimized to give you a clean bottom finish. You know how some blades leave a rough edge or splinter the wood? These are made to reduce that.
They handle intricate curved cuts really well. So if you are cutting patterns or shapes, the blade follows your line without fighting you.
The high carbon steel edge is what gives these blades their strength. It cuts fast but also stays sharp for a long time. You get consistent performance even if you are working through a lot of material. The steel is tough enough to handle soft materials without slowing down.
It is a good choice for both cordless and corded jig saws.
These blades use a T-shank design. That means they fit all combo saws and most U-shank models. The attachment is secure and stable. You wont have to worry about the blade slipping mid-cut. There is also a fast plunge tip design. This lets you start cutting right into the material without needing a pilot hole. Setup is straightforward and reliable.
The thin kerf design helps with fast and effortless cuts.
14 PCS U-Shank Jig Saw Blade Set, Jigsaw Blades Fit Vast Majority U Shank Jigsaws, Jigsaw Blades Set for Wood, Plastic and Metal Cutting, 6T 8T 10T 14T 18T 24T 32T
The 14 PCS U-Shank Jig Saw Blade Set provides a practical range of blades for your cutting projects. This set gives you fourteen blades total, with two pieces for each of the seven tooth counts: 6T, 8T, 10T, 14T, 18T, 24T, and 32T. Having duplicates means you always have a spare when a blade wears out or breaks.
These blades are made from high-quality high-carbon steel. This material is hard and wear-resistant, which helps the blades last longer than cheaper alternatives.
You don’t have to worry about the blade dulling halfway through a cut. The steel holds its edge well, even when you are cutting tougher materials.
The tooth design is focused on cutting speed. Each blade is shaped to remove material efficiently, so you can make your cuts without forcing the saw. The teeth are sharp and agressive, which reduces the time you spend on each job.
Whether you are making straight cuts or following a curved line, the blades perform smoothly.
Compatibility is a key part of this set. The blades feature a U-shank design that fits the vast majority of jigsaws on the market. If you have a standard jigsaw, these blades will likely lock right into place. There is no need to worry about special adapters or returning the set because it does not fit your tool.
EZUVITA 25-Piece Jigsaw Blades Set with Storage Case–CR-V&HSS Steel, Assorted T-Shank Replacement Jig Saw Blades for Cutting Wood, Plastic and Metal
The EZUVITA 25-Piece Jigsaw Blades Set with Storage Case gives you a solid range of T-shank blades for wood, plastic, and metal. It comes with 25 blades across 8 different types, so you can handle straight cuts, curve cuts, and even speed cuts without hunting for the right tool mid-project. Here is what you get in the box. There are blades for basic and straight cutting in wood and plastic, like the T119B (3-inch, 12TPI) and the T119BO for curves.
For cleaner work, the T101B (4-inch, 10TPI) offers a smooth finish on straight cuts, while the T101AO (3.3-inch, 18TPI) handles curves with more teeth per inch. If you need speed, the T144D (4-inch, 6TPI) cuts fast through wood. For metal, the T118A (3-inch, 21TPI) works well on thin sheets, and the T123X (4-inch, 10/21TPI) uses a progressor design for thicker metal. There is also a T127D (4-inch, 8TPI) blade made for aluminum. That covers most common cutting tasks without needing extra sets.
The blades use two materials. Chrome vanadium steel is used for the wood-cutting blades, which gives them good durability. High speed steel is used for the metal blades, so they can handle harder materials without dulling quickly. Each blade has a universal T-shank, so they fit most major jigsaw brands like Bosch and DeWalt. This makes them easy to switch in and out. The pattern coating on the blades gives them a clean look, but it is the fit that matters most.
20PCS T Shank Jigsaw Blades Tool for Wood Plastic Metal Compatible with 90% Power Jig Saws Such as Bosch DEWALT RYOBI One+ Makita SKIL Black+Decker Includes 4 Each of T101B T101AO T144D T118A & T118B
The GINEPAN 20PCS T Shank Jigsaw Blades Tool for Wood Plastic Metal gives you a complete set of cutting options for your shop. It includes four each of the T101B, T101AO, T144D, T118A, and T118B blades. That is twenty blades total, covering everything from thin wood to thick metal. You get a good mix for general woodworking and for ferrous or non-ferrous metals.
These blades are made from high carbon steel and high-speed steel.
The production process includes quenching and tempering, which makes them tough and durable. They match or exceed name-brand quality, but you pay a fraction of the price. Why spend $5 to $10 per blade when this set covers your everyday needs? It is a superior value for any contractor or DIYer.
The T-shank design has five contact points for maximum grip and stability. This means you don’t have to tighten screws in the mounting holes, which reduces wear and tear on your tool.
It works great with quick-chuck systems. You get efficient cutting without the blade slipping out of place.
These jigsaw blades are compatible with over 90% of power jig saws on the market. They fit Bosch, DEWALT, RYOBI One+, Makita, SKIL, Black+Decker, Hitachi, Milwaukee, Metabo, Porter-Cable, and Craftsman models. That makes them a versatile addition to any tool set.
Jigsaw Blade For Plywood Buying Guide
A quality jigsaw blade for plywood makes splinter-free cuts a simple task. But walk into any hardware store and you’ll face a wall of options. It’s easy to grab the wrong one and end up with rough, chipped edges. You want clean cuts for your project, not a headache. Let’s fix that. This guide breaks down the key factors so you pick the right blade every time.
Tooth Count and Cut Quality
More teeth means a smoother finish. For plywood, look for blades with at least 10 to 14 teeth per inch (TPI). This high tooth count shears through the wood fibers instead of tearing them. You’ll notice the difference on the top surface. A blade with fewer teeth cuts faster but leaves a rougher edge. For furniture or visible joints, go high TPI. For quick rough cuts, you can drop down a bit.
Tooth Design Matters
Not all teeth are the same. You want a blade with a “reverse tooth” design. These blades have teeth pointing downward at the tip. They cut on the upstroke, which pushes splinters back into the cut line. This simple trick reduces chipping on the top side of the plywood. Some blades also have a ground or milled tooth set. These give an even cleaner cut than stamped teeth. Check the packaging for terms like “clean cut” or “splinter-free.”
Blade Material and Shank Type
High-speed steel (HSS) blades work fine for occasional use. But if you cut plywood often, try bi-metal blades. They last longer and resist bending. Also, check the shank. Most jigsaws use a “T-shank” design, which is easy to swap. Make sure your saw takes T-shanks. A universal shank might not lock in securely.
Gullet Size for Plywood
The gullet is the gap between teeth. For plywood, choose a blade with a smaller gullet. This prevents the blade from grabbing and jumping. A large gullet is better for thick lumber, not thin plywood. Stick with fine-tooth blades that have tight gullets. You’ll get more control and less vibration.
Remember: one wrong blade can ruin an entire sheet. Take a minute to match the blade to your project. Your cuts will thank you.
Frequently Asked Questions About Jigsaw Blade For Plywood
What type of jigsaw blade is best for cutting plywood?
For plywood, you want a blade with many small teeth. Look for a TPI (teeth per inch) of 10 to 20. A higher TPI gives a smoother cut. Use a blade labeled for wood or plywood. Also, choose a blade with a ground tooth set. This helps reduce splintering on teh top surface.
Should I use a fine or coarse tooth blade?
Use a fine tooth blade for plywood. Coarse blades can chip the thin veneer. A blade with 12 to 14 TPI works well for most plywoods. If you need a very clean edge, go for a blade with 18 to 20 TPI. The extra teeth leave a smoother finish.
Does the blade material matter?
Yes, it does. High-carbon steel blades are cheap but dull fast. Bi-metal blades last longer and resist heat. For plywood, a carbide-tipped blade is a great choice. It stays sharp and cuts cleanly. It costs more but saves you time and frustration.
How do I stop splintering when cutting plywood?
Splintering is common. Heres a trick: put masking tape along your cut line. The tape holds the wood fibers in place. Also, use a blade with a “down-cut” or “reverse” tooth design. This pushes the wood down as you cut. Or, cut with the good side facing down if your saw has an orbital action setting.
What blade length do I need for plywood?
Plywood is thin, so a short blade works fine. A blade around 3 to 4 inches long is perfect. Longer blades can flex and bend, causing a messy cut. Stick with a length that just pokes through your material. This gives you better control.
Can I use a jigsaw blade for plywood on other materials?
You can, but it’s not ideal. Plywood blades are made for wood. Using them on metal or plastic will dull them quickly. For other jobs, switch to a blade designed for that material. It will save you money and give better results.
How often should I change my jigsaw blade?
Change it when it starts to cut poorly. Signs include burning, rough edges, or needing more force. A dull blade can ruin your plywood. For frequent use, swap blades after every few projects. For light use, check the blade before each cut.
What to Remember
This article has covered teh essential information you need to make an informed decision. We’ve examined the key features and considerations that matter most when choosing the right product for your needs.
When thinking about jigsaw blade for plywood, remember to focus on what works best for your specific situation. The ideal choice depends on your individual requirements and preferences. Take your time to evaluate all the options carefully.