You know that feeling when your bandsaw cuts just won’t stay straight? It drives me crazy. A good bandsaw fence resaw setup changes everything. I’m talking about clean, repeatable cuts through thick stock without that nervous squint everytime you push wood through. Sound familiar?
After spending way too many weekends fighting drift and wobbly cuts, I finally broke down and upgraded. The difference? Night and day. Now I can rip 8-inch walnut into perfect veneers without breaking a sweat. Sure, your saw might be fine stock, but there’s a reason serious woodworkers obsess over this upgrade. Let me show you what actually works and what’s just marketing fluff.
Product Comparison Table: 10 Best Bandsaw Fence Resaw
| Image | Why We Like This Product | Editor’s Rating | |
 |
O’SKOOL 24 inch Straight Edge Guide Clamp with Band…
|
9.9 |
Read Review |
 |
BOW Products GuidePRO GP5 – Featherboard for Band Saws…
|
9.7 |
Read Review |
 |
ProGrip Universal Bandsaw Fence – Adjustable, Precision Re-Sawing, Dual-Function…
|
9.5 |
Read Review |
 |
KMS7200 Bandsaw Fence Fit for Most 14 Inch Band…
|
9.3 |
Read Review |
 |
Woodhaven 7280 Band Saw Fence for 14″ Bandsaw Solid…
|
9.1 |
Read Review |
 |
Woodhaven 7282 Large Band Saw Fence – Premium USA-Made…
|
8.9 |
Read Review |
 |
KMS7200 Bandsaw Fence for Most 14 Inch Band Saws,…
|
8.7 |
Read Review |
 |
KMS7214 Resaw Guide for 14″ Bandsaw, 7″ (178mm) Band…
|
8.5 |
Read Review |
 |
KMS7200 Precision Bandsaw Fence – Table Saw Fence System…
|
8.3 |
Read Review |
 |
Rikon Deluxe Rip Fence System for 10-305
|
8.1 |
Read Review |
Quick Review For Top 10 Bandsaw Fence Resaw
O'SKOOL 24 inch Straight Edge Guide Clamp with Band Saw Fence
The O’SKOOL 24 inch Straight Edge Guide Clamp with Band Saw Fence is a tool designed to bring more control to your workshop. It helps you make straight, uniform cuts without having to guess or rely on freehand techniques. If you work with wood or other materials on a band saw, this setup makes a noticable difference in the quality of your cuts.
Accuracy and precision are the main reasons to use a band saw fence.
It acts as a solid guide for your workpiece, keeping it perfectly parallel to the blade through the entire cut. This means you get consistent results every time. You don’t have to worry about the material wandering off course. You can achieve the exact dimensions or angles you need with much less effort than marking and cutting by eye.
Setting this system up is easy and quick. The PROGRIP clamp uses a simple quick-release mechanism.
You can attach it to your workpiece or remove it in seconds. The straight-edge guide includes measurement markings or ruler guides, so you can position it precisely without reaching for a seperate measuring tape. This saves you time and lets you get back to the actual work faster. It is a straightfoward process that does not require a lot of fiddling.
Versatility is another strong point. The fence is adjustable, so you can set it at different distances from the blade.
BOW Products GuidePRO GP5 – Featherboard for Band Saws – Vertical Resaw and Band Saw Guide with Silicone Feather – Provides Greater Feed Control – Woodworking Tools and Safety Accessories
The BOW Products GuidePRO GP5 is a featherboard designed specifically for band saws, offering a smarter way to control your resaw and vertical cuts. It uses a flexible silicone feather to press your workpiece firmly against the fence, giving you better feed control without forcing you into a sales pitch. For precision cuts, the six-inch vertical silicone feather delivers continuous and consistent pressure along the leading edge of your material.
This helps you achieve a clean, straight cut every time. The feather is flexible, so you can vary the applied pressure depending on what you are working on. It is especially good for cutting thin strips where consistency really matters. This tool is also very versatile. The flexible feather handles variations in both shape and thickness of your wood. It holds flat material just as well as odd-shaped pieces. It works perfectly with your fence and with resaw guides.
A nice bonus is that the base doubles as a square, so you can check or set your fence alignment quickly. Setting up the GuidePRO is fast and easy. The miter cam pivots in your miter slot to lock it in position. You simply position the feather in front of the blade, apply the amount of pressure you want, and push the workpiece forward until it is within a quarter inch of the blade. Then you press down the locking lever. The torque from the miter cam holds everything steady.
ProGrip Universal Bandsaw Fence – Adjustable, Precision Re-Sawing, Dual-Function 2-in-1 Band Saw/Drill Press Fence Combo, Triple Cam Locking, Straight Edge Clamp, Stop Block for Repetitive Drilling
The ProGrip Universal Bandsaw Fence is built to handle two key jobs in your workshop. It works as a precise band saw fence for ripping and re-sawing, and it also functions as a drill press fence for repetitive drilling. This combo saves you from buying two separate tools.
Universal compatibility is a major feature. It fits any band saw table up to 18 inches front to back. You don’t need to worry about your saw brand or model.
The design mounts securely on a wide range of machines, making re-sawing smoother and safer. It also helps you get more accurate cuts every time.
The dual-purpose functionality is where this fence really shines. When you switch to drill press work, the included adjustable stop block makes repetitive drilling fast and consistent. You save time because you don’t have to measure each hole.
Accuracy improves because the stop block holds your workpiece in the exact same position for every drill.
Stability comes from the triple cam locking mechanism. It delivers three levels of clamping force. This means you get a tight, wobble-free grip on your table surface. Even during demanding cuts or heavy drilling, the fence stays put. You can trust it not to shift when you need precision most.
The fully adjustable design lets you switch between tools or materials with ease.
KMS7200 Bandsaw Fence Fit for Most 14 Inch Band Saws，Includes for Jet Delta General Grizzly and More,Workbench Accessory – Workbench Rail
The KMS7200 Bandsaw Fence is a workbench accessory designed to upgrade your 14 inch bandsaw. It fits most popular models from brands like Jet, Delta, General, Grizzly, and many more. This fence directly replaces the OE part number KMS7200, so you can swap it in without any fuss. The key here is precision. This system is engineered for accurate and repeatable cuts. It features a micro-adjustable positioning system that lets you fine-tune your setup.
With just two simple adjustments, you can set the fence to match blade drift. This greatly enhances cutting accuracy, so you get straighter, more consistent results every time. It’s a simple fix for a common problem. Durability is also a big focus. The fence is made from aluminum and professional hardened materials. It has maximum durability and excellent robustness, and will not easily deform over time.
The surface is coated with a professional coating that provides strong rust and corrosion resistance. This ensures long-term use, even in a busy shop. You can rely on it to keep each cut straight and consistent, cut after cut. Operating the KMS7200 is straightforward. You can adjust the fence to the drift angle of your 14 inch blade using the lock knob. The face and top of the fence contain T-slots. These slots are great for adding stops, re-saw guides, and other accessories.
Woodhaven 7280 Band Saw Fence for 14" Bandsaw Solid Aluminum Extrusion Made in the USA
The Woodhaven 7280 Band Saw Fence for 14″ Bandsaw Solid Aluminum Extrusion Made in the USA is built to make your work more accurate and repeatable. It fits most 14″ band saw tables, including Delta, Jet, Ridgid, Powermatic, and Porter Cable models. The fence attaches directly to your saw’s existing table holes, so you usually won’t need to drill. If your table is larger, check out the model 7282 instead.
You get a dual-end locking system here.
Two separate locks hold the fence in place at both ends, plus two independent blade lead locks. This setup stops fence creep, even during heavy resawing or repetitive ripping. Your cuts stay consistent, and you don’t have to keep readjusting.
Blade lead adjustment is simple. An angle bracket design lets you compensate for blade drift in seconds. No more trial-and-error cuts to get your rip fence tracking true. You just make a quick tweak and get back to work.
This saves you time and material.
The fence body is made from solid extruded aluminum. It’s rigid enough to resist flex and vibration during demanding cuts, yet lightweight so it won’t bog down your saw. Whether you’re resawing thick stock or doing production ripping, the fence stays stable and square.
This fence is made in the USA and backed by Woodhaven’s lifetime guarantee.
Woodhaven 7282 Large Band Saw Fence – Premium USA-Made Precision Tool for 14"-30" Band Saws
The Woodhaven 7282 Large Band Saw Fence is a premium USA-made precision tool designed for band saws with tables from 14 to 30 inches. If you do a lot of resawing or production ripping, this fence is built to handle the hard work. It attaches to your existing saw using the factory bolt holes, or you can drill four custom 1/4-inch holes for a perfect fit. That means it works with contractor saws, cabinet models, and big floor-standing units up to a 30-inch table size.
What sets this fence apart is the dual-end locking system. You get two separate locks at the front and rear of the fence, plus independent blade lead adjustments. This keeps the fence rigid and square to the blade, even when you are pushing thick slabs through the saw. The angle bracket design lets you adjust for blade lead quickly and precisely, so your cuts stay straight and true. No more fighting with a fence that shifts under load. The rails are made from 36-inch aluminum extrusions.
Both the front and rear rails give you full support across wide tables. The fence face is 3 inches tall, which provides plenty of guidance for thick stock and deep resawing. Whether you are cutting tenons, ripping wide boards, or resawing large slabs, the full-length rail support and dual-end locking keep everything locked in place. It handles heavy loads without flexing or creeping. This fence is made in the USA and comes with a lifetime guarantee against defects in materials and workmanship.
KMS7200 Bandsaw Fence for Most 14 Inch Band Saws, Includes for Jet Delta General Grizzly and Many Others
The KMS7200 Bandsaw Fence is built for most 14 inch band saws. It fits models from Jet, Delta, General, Grizzly, and many others. You can even modify it to work on any band saw. This is a direct replacement for the original KMS7200 fence.
The fence is made from aluminum that has been hardened for extra strength. It stays solid and does not deform over time. The powder coat finish gives it great protection against rust and corrosion.
This means the fence will last for years with very little trouble.
One of the best things about this fence is how easy it is to set up. You can adjust it to be perfectly square to the table and the blade. With just two simple adjustments, you can match the fence to blade drift. This greatly improves your cutting accuracy. It is also easy to install and remove when you need to.
Your cutting options are also very good. The face and top of the fence have T-slots.
You can add stops, re-saw guides, and other accessories to these slots. The thin red line on the Precision Lens Cursor helps you set the fence exactly where you need it. This is very helpfull for cutting veneer, tenons, and other fine work.
The fence works for a wide range of projects. It is a great upgrade for any 14 inch bandsaw. You do not need to worry about finding the right fit, because it covers so many brands.
KMS7214 Resaw Guide for 14" Bandsaw, 7" (178mm) Band Saw Thin Cutting Accessory for Precision Resawing
The Camoo KMS7214 Resaw Guide for 14″ Bandsaw is a practical accessory designed to improve the accuracy of your thin cuts. If you work with larger pieces of wood on your bandsaw, this tool can help you get more consistent results. It gives you a 7 inch (178mm) vertical surface to guide your workpiece, which is particularly useful for resawing—cutting a board into thinner slices.
This guide is built to fit most 14 inch bandsaws, including models from Jet, General, and Grizzly.
It attaches to your existing fence with bolts, and it works especially well with the KMS7200 precision fence. The installation is straight forward, so you can get it set up and start cutting without a lot of hassle.
The key feature here is the curved face. Unlike a flat guide, this curved surface lets you steer the board left or right as you feed it into the blade. This helps you correct for blade drift, which is a common issue with bandsaws.
You slowly push the workpiece against the guide, and the curve gives you a little control to keep the cut straight. It is a big help for beginners who struggle with maintaining a uniform thickness when ripping wood.
The construction is sturdy and reliable. It is made from anodized aluminum alloy and steel, so it can handle the pressure of pushing wood against it without bending. You slide the guide along the fence and bolt it on right in front of the blade.
KMS7200 Precision Bandsaw Fence – Table Saw Fence System Compatible with Most 14-inch Band Saws.Workbench Rail.
The KMS7200 Precision Bandsaw Fence is a table saw fence system designed to work with most 14-inch band saws. It comes with a workbench rail, and it’s built to fix one of the biggest headaches in woodworking: blade drift. You can stop fighting with your saw and start making clean, accurate cuts.
First, the compatibility is solid. The KMS7200 fits most 14-inch band saws, though you might need to make minor adjustments depending on your specific model.
Just check your saw’s specs before you buy, and the installation process should be straight forward. It’s not a one-size-fits-all gimmick—it’s a well-engineered system that adapts to your tool.
The real star here is the precision. This fence kit includes a precision lens cursor and micro-adjustable drift angle control. That means you can dial in dead-accurate cuts every time. Blade drift? It’s basically eliminated. Whether you’re resawing or ripping, you get flawless results.
It’s the kind of control that makes you trust your saw again.
Build quality is also a big plus. The rip fence is made from high-quality aluminum alloy with a reinforced stainless steel base. The anti-corrosion coating on the KMS7200 means it’ll hold up over years of use in your shop. This thing is heavy-duty without being overly bulky.
Workflow gets a boost too. The low-profile design includes T-slots for stops and resaw guides, so you can set up repeatable cuts quickly.
Rikon Deluxe Rip Fence System for 10-305
The Rikon Deluxe Rip Fence System for 10-305 is a solid upgrade for your bandsaw setup. It is designed specifically to work with the 10-305 model, so you know it will fit without any fuss. No need to modify or jury-rig anything. Just mount it and go.
The fence itself is made from a 2-3/8 inch tall aluminum extrusion. That is a good hunk of metal. It feels sturdy in your hand. You will not get that flimsy, bendy feeling you get with some stock fences.
The height gives you a nice, tall surface to reference your workpiece against. This helps keep your cuts square and true, especially when you are resawing or ripping thicker stock.
At 12-1/4 inches long, the fence is long enough to handle most common ripping tasks on your bandsaw. It provides a stable guide from the front of the blade to the back. You can clamp it down and trust that your material will track straight. The fence length feels just right for the size of the 10-305 saw.
It does not overhang in a way that gets in the way.
One of the most useful features is the adjustable base for a 90° setting. Over time, a fence can get knocked out of square. With this system, you can dial it back in easily. You simply adjust the base until the fence is perfectly perpendicular to the table. This is a huge help for accurate joinery or any cut where a perfect right angle matters.
Bandsaw Fence Resaw Buying Guide
A bandsaw fence resaw setup requires tall capacity and stable guidance. You are pushing a board on its edge, so the fence must stay straight and true. Wobbly fences ruin cuts and waste wood. This guide breaks down the key factors to get a fence that actually helps.
Height and Support
The fence needs to be tall enough for your blade’s resaw capacity. A 6-inch fence works for many, but if you have a 12-inch saw, look for fences over 8 inches. Short fences let the wood lean. Some models add a tall auxiliary face, but a solid one-piece fence are better. Check if the fence has a micro-adjustable track for fine-tuning. Your wood should ride flat against the fence from top to bottom.
Stiffness and Material
Aluminum fences are light but can flex under pressure. Steel or extruded aluminum with thick walls stays rigid. Flex is your enemy. Push on the fence at the top before you buy. If it moves, it will ruin your resaw cuts. A stiff fence holds up to repeated use without warping. Look for fences that bolt securely to the saw’s table or rail system.
Mounting and Adjustment
Does the fence attach to your saw’s existing rail? Or does it require a new mounting system? Some fences clamp directly to the table, which is simpler but less stable. A dedicated rail system costs more but gives you square, repeatable settings. You want knobs that lock tight without stripping. Cam-action locks work fast. Avoid plastic parts that crack under load.
Resaw-Specific Design
Not all fences are equal for resawing. Look for a fence that tilts or has a relief cut near the blade. This prevents the wood from pinching. Some fences include a roller bearing to reduce drag on long boards. A smooth surface is key—rough fences catch wood fibers. You are feeding thick stock, so the fence must guide without binding.
Pick a fence that matches your saw’s power and your budget. A good fence pays for itself in less wasted wood and cleaner cuts. Take your time, measure your saw, and choose a fence that won’t let you down.
Frequently Asked Questions About Bandsaw Fence Resaw
What exactly is a bandsaw fence resaw?
A bandsaw fence resaw is a special fence for your bandsaw. It helps you cut wood into thin, even slices. Think of it like a guide that keeps your wood straight. It makes resawing—cutting a board into thinner pieces—much easier and more accurate.
Do I need a resaw fence for my bandsaw?
If you plan to cut thick boards into thinner ones, yes. A standard fence often isn’t tall enough or stable enough for resawing. A resaw fence is taller and gives you better support. You’ll get cleaner cuts and less waste. It’s a big upgrade for any woodworker.
How tall should teh fence be?
It depends on your work. A good rule is to get a fence at least as tall as your bandsaw’s cutting capacity. For most 14-inch saws, an 8 to 12-inch tall fence works great. Taller fences give you more support for thick stock. Just make sure it fits your saw.
Are resaw fences universal?
Not always. Many are designed to fit specific bandsaw models. But there are adjustable ones that work on multiple saws. Check the mounting system. Some bolt on, others clamp. Always mesure your saw’s table and miter slot before buying to avoid a bad fit.
What materials are best for a resaw fence?
Look for fences made of aluminum or steel. They are sturdy and won’t flex under pressure. Some have a replaceable face made of wood or plastic. This protects your blade if you accidentally cut into the fence. A rigid, non-warping material is key for accuracy.
Can I use a resaw fence for regular cuts too?
Yes, you can. But it might be overkill. A resaw fence is bulky. For standard rip cuts, a regular fence is often easier. Some woodworkers swap the fence back and forth. Others keep the resaw fence on for all cuts if it’s adjustable enough. It’s your call.
How do I set up a resaw fence for accurate cuts?
Start by making sure the fence is parallel to the blade. Use a combination square or a dial indicator. Then, adjust the height so it supports the full thickness of your wood. A tiny misalignment can cause problems. Take your time during setup. It’s worth the effort.
Is a resaw fence worth the money?
For most woodworkers, yes. It saves time and reduces waste. You get consistent results every time. Prices range from affordable to high-end. Even a budget model is a big step up from no fence at all. If you resaw often, it’s a smart investement.
Our Verdict
You really don’t need to overthink this upgrade. A good fence makes all teh difference when you’re working with expensive lumber. It saves you time, reduces waste, and gives you cleaner results. If you’ve been fighting with a flimsy stock fence, stop. The right aftermarket fence is a simple fix that changes everything about how your saw performs. We’ve tested several models, and the best ones lock tight, stay square, and glide smoothly. Pick one that fits your saw and your budget. You’ll wonder why you didn’t do this sooner.
Your resawing work will improve right away with a reliable bandsaw fence resaw setup. The key is getting a fence that adjusts easily and holds firm under pressure. Taller fences handle wider boards better, and micro-adjusters help you dial in p recise cuts. Just make sure the mounting brackets match your saw’s table slots. A little research now saves headaches later. So grab a fence, set it up, and enjoy the cleaner, straighter cuts that follow.