Check used table saws for sale to get quality at lower prices. You don’t have to break the bank for a solid saw. Many woodworkers upgrade their gear, leaving behind perfectly good machines. When you browse used table saws for sale, you can often find top brands like Delta or SawStop for half the price. Just take your time and inspect the table for warps or rust. A little surface rust is fine, but deep pitting is a red flag. You want a flat surface for accurate cuts.
Think about what size fits your shop. A contractor saw is portable, while a cabinet saw offers more power. Check the motor and arbor bearings by running it. Listen for weird noises. The fence is key too—it should lock square and slide smooth. With some patience, you can snag a great deal. Your projects will thank you, and so will your wallet. Happy hunting!
Product Comparison Table: 10 Best Used Table Saws For Sale
| Image | Why We Like This Product | Editor’s Rating | |
 |
SKIL 15 Amp 10 Inch Portable Jobsite Table Saw…
|
9.5 |
Read Review |
 |
SKIL 15 Amp 8-1/4″ Compact Portable Jobsite Table Saw…
|
9.4 |
Read Review |
 |
DEWALT Table Saw 10 Inch with Foldable Rolling Table…
|
9.2 |
Read Review |
 |
DEWALT 15 Amp 8-1/4 in. Compact Portable Jobsite Table…
|
9.1 |
Read Review |
 |
Table Saw 10 Inch, 15 Amp 5000RPM Powerful Tablesaw…
|
8.9 |
Read Review |
 |
Evolution R10TS 10″ Jobsite Table Saw | Zero-Clearance Throat…
|
8.8 |
Read Review |
 |
BOSCH GTS15-10 10 Inch Portable Jobsite Table Saw with…
|
8.6 |
Read Review |
 |
Saker Mini Multi-Functional Table Saw – Portable Desktop Electric…
|
8.5 |
Read Review |
 |
SKIL 10 Inch Heavy Duty Worm Drive Table Saw…
|
8.3 |
Read Review |
 |
Mini Table Saw, Sinpiode Multi-Functional Desktop Portable Table Saw…
|
8.2 |
Read Review |
Quick Review For Top 10 Used Table Saws For Sale
SKIL 15 Amp 10 Inch Portable Jobsite Table Saw with Folding Stand- TS6307-00
The SKIL 15 Amp 10 Inch Portable Jobsite Table Saw with Folding Stand- TS6307-00 is built for practical, everyday use on the job site or in your workshop. It focuses on giving you accurate cuts, easy adjustments, and a design that doesn’t take up much space when you are done working.
One of the first things you will notice is the rack and pinion fence rails. This system keeps the fence perfectly parallel to the blade.
That means you get fast, smooth, and accurate cuts every time you set it up. No more fighting with a fence that slips out of alignment. You just adjust it and it stays where you put it. Speaking of alignment, this saw also offers a micro-adjustment for the blade itself. You can fine-tune it so the blade runs exactly parallel to the rip fence and the miter slot. This level of control is usefull for getting clean results on every project.
Portability is a big part of the design.
The integrated folding stand makes it easy to pack up. The legs fold in quickly, so you can move the saw from one spot to another or store it without a hassle. It saves you time when you need to get set up fast and clean up just as fast.
When it comes to cutting capacity, this table saw can handle material up to 4×4 at 90 degrees. So if you are working with common lumber sizes, you are covered. The bevel capacity ranges from 2 to 47 degrees.
SKIL 15 Amp 8-1/4" Compact Portable Jobsite Table Saw (Stand SFS0001 Sold Separately)-TS6308-00
The SKIL 15 Amp 8-1/4″ Compact Portable Jobsite Table Saw (Stand SFS0001 Sold Separately)-TS6308-00 is built around getting solid cuts done on site without taking up a ton of truck space. With a powerful 15 amp motor, this saw handles a range of tasks like ripping down sheets of plywood or cross-cutting 2x4s for framing.
It also manages dado joints, so you have some versatility for different woodworking projects.
You get a 2-1/2-inch maximum depth of cut at 0 degrees, which means you can slice through 3x material in a single pass. That’s handy when you need to break down thicker lumber quickly. The rip capacity is expansive: 24.5 inches to the right of the blade and 12 inches to the left.
This makes ripping full sheets of plywood or other sheet goods much more doable, even in a smaller workspace.
The fence system uses rack and pinion rails for quick adjustments. It stays parallel to the blade, so your cuts come out fast, smooth, and accurate. You can also micro-adjust the blade alignment to keep it parallel to the rip fence and miter slot, which helps maintain precision over time.
DEWALT Table Saw 10 Inch with Foldable Rolling Table Saw Stand, 15 Amp, 4800 RPM, 32-1/2-Inch Rip Capacity (DWE7491RS)
The DEWALT Table Saw 10 Inch with Foldable Rolling Table Saw Stand, 15 Amp, 4800 RPM, 32-1/2-Inch Rip Capacity (DWE7491RS) is built for serious cutting work. This saw gives you a solid 15 amp motor that spins at 4800 RPM, so it can cut through hardwoods without bogging down. You get a 32-1/2 inch rip capacity, which means you can handle larger shelving and trim materials easily.
The standout feature here is the rack and pinion telescoping fence system.
It makes fence adjustments fast, smooth, and accurate. No more fighting with a sticky fence or measuring twice. You slide it, it locks, and you are ready to cut. The patented material support also helps when you are making narrow rip cuts, which is a nice touch for detailed work.
Portability is a big part of this saw. The rolling stand is designed for easy set up and breakdown.
It gives you excellent stability when the saw is in use, but folds down to a small package for transport or storage. The telescoping fence rails retract to keep everything compact. You can flip over the ripping fence for narrow rip cuts without needing extra tools.
Storage is well thought out. The onboard storage system gives you easy access to the blade guard assembly, fence, riving knife, miter gauge, wrenches, push stick, and cord wrap when not in use.
DEWALT 15 Amp 8-1/4 in. Compact Portable Jobsite Table Saw (DWE7485)
The DEWALT 15 Amp 8-1/4 in. Compact Portable Jobsite Table Saw (DWE7485) is designed to handle serious cutting tasks without taking up your whole truck bed. It has a 24.5-inch rip capacity, which means you can rip down a full sheet of 4×8 plywood or OSB with no problem. That kind of space usually belongs to bigger saws, but here it’s packed into a frame that’s easy to move around.
Size is a big deal with this model.
It’s compact enough to slide into tight storage spots or load up for a job site without a struggle. You won’t be wrestling with a bulky machine every time you need to set up or pack down. The metal roll cage base adds toughness, so it holds up to the bumps and drops that happen on a real work site. It’s built to last, not just sit pretty in a shop.
Getting the fence set is quick and acurate thanks to the rack and pinion telescoping rails.
You just turn the knob and the fence slides smoothly into place. No fighting with stuck hardware or guessing if its straight. The adjustments feel solid and repeatable, which saves time when you have a stack of cuts to make.
Storage is built right in. The guard, fence, wrenches, and miter gauge all have onboard spots, so you aren’t digging through tool bags looking for a lost part.
Table Saw 10 Inch, 15 Amp 5000RPM Powerful Tablesaw With Stand & Protective Cover, 36 X 25 Inch Tabletop Saw 90° Cross Cut & 0-45° Bevel Cut, Adjustable Depth, for Woodworking, Metal, Plastic
The ‘Table Saw 10 Inch, 15 Amp 5000RPM Powerful Tablesaw With Stand & Protective Cover’ is a straightforward tool built to handle a range of materials. If you work with wood, metal, or plastic, this saw gives you the control you need for clean cuts.
It comes with adjustable cutting options. You can make 90° cross cuts and 0-45° bevel cuts. The maximum cutting depth for cross cuts is 74mm, and for bevel cuts it goes to 52mm.
This means you can adjust the depth to match the thickness of your material, giving you more flexability in your projects. Whether you are ripping hardwood or cutting aluminum, the settings are easy to change.
Portability is a key part of the design. The back of the saw has a port for hooking up a dust collector. This helps keep your workspace cleaner and reduces dust in the air. There is also storage space on both sides for wrenches and push rods.
So you don’t have to hunt for tools while you are working. The stand is sturdy, with triangle supports at the back that improve stability. The metal stand holds everything steady, even when you are pushing through tougher material like hardwood.
Safety is built in. The transparent blade guard gives you a clear view of the cut while protecting your hands from accidental contact. It also comes with a push stick so you can keep your fingers away from the blade during operation.
Evolution R10TS 10" Jobsite Table Saw | Zero-Clearance Throat Plate | Dado Plate Included | 15A Motor | 26” Rip | 3-3/8” Cut | 0-45° Bevel | Precision Fence | Heavy Duty Portable Woodworking Saw
The Evolution R10TS 10″ Jobsite Table Saw is built for real work. It has a powerful 15A motor with a soft start, so you can cut wood, mild steel, aluminum, and composites without the blade jerking. The included 10″ TCT blade gives you clean, precise cuts right out of the box.
You get a 26-inch rip capacity and a max cut depth of 3-3/8 inches. The bevel adjusts from 0 to 45 degrees using a geared mechanism, so you can set your angles accurately.
The zero-clearance throat plate reduces tear-out, making your cuts cleaner. The rack and pinion fence system lets you micro-adjust for repeatable precision, and the integrated cross-cut sled helps you make accurate crosscuts without fuss.
This saw is designed for the jobsite. It has a lightweight steel frame with carry handles, so you can move it around easilly. Onboard storage keeps your accessories handy, and the outfeed support bar gives you stability when working with larger boards.
It’s built to handle repeatable, professional work day after day.
For expanded capability, a dado plate is included. You can use it for dadoes and grooves, which adds versitility for woodworking and construction tasks. Whether you are building cabinets or framing, this saw adapts to what you need.
Safety features are solid. There is an electronic blade brake that stops the blade quickly. Anti-kickback pawls and a quick-release riving knife help prevent dangerous kickback.
BOSCH GTS15-10 10 Inch Portable Jobsite Table Saw with Gravity-Rise Wheeled Stand, 15 Amp, 32-1/8 Inch Rip Capacity, 4 HP
The BOSCH GTS15-10 10 Inch Portable Jobsite Table Saw with Gravity-Rise Wheeled Stand is a solid workhorse for serious woodworking. It packs a 15-amp motor that spins at 3,800 rpm, giving you plenty of power for rip-cutting and cross-cutting both fine and hard wood materials. You get a 32-1/8 inch rip capacity, which means you can handle larger sheets without too much hassle. One of the first things you will notice is the convenience brake.
It helps the blade stop in roughly three seconds, boosting your productivity and letting you move on to the next cut faster. The soft-start circuitry is a real plus—it manages the motor start-up intensity and minimizes the chance of tripping a circuit breaker on a busy jobsite. The electronically regulated speed also helps maintain consistent power under load, so you do not get bogged down in dense lumber. Portability is a big deal here.
The included GTA50W Gravity-Rise Wheeled Stand is lighter than previous models, and it offers single-action setup and takedown. You can roll it from the truck to the work area and have it ready in seconds. The open frame design features a roll bar and lightweight construction for durability without extra bulk. The rack and pinion rip fence makes adjustments easy. It has color-coded index pins that match a color-coded scale, so you can dial in your settings by hand without squinting.
Saker Mini Multi-Functional Table Saw – Portable Desktop Electric Saw for Wood & Plastic Cutting, Speeds & Angle Adjustable with More Accessories
The Saker Mini Multi-Functional Table Saw is a compact electric saw made for cutting wood and plastic, plus a few other materials. It’s not trying to be a big construction tool. Instead, it’s built for smaller jobs around the house or workshop.
This saw works with PCB boards, wooden sticks, plastic sheets, thin wooden boards, cans, copper-clad panels, aluminum tubes, and copper tubes. You get four different circular saw blades in the box.
There is a PCB cutting blade, a high-speed steel blade, an alloy blade, and a resin blade. Each one is for a different material, so you can pick the right one for what you are cutting. The blade size is 63 millimeters in diameter with a 16 millimeter inner hole.
Under the hood, it has a 90W pure copper motor that can spin up to 5000 rpm. There are five speed settings you can adjust. This helps you cut at a pace that feels right for the material.
The cutting angle goes from 0 to 90 degrees, so you can make straight cuts or angled ones. The sawing depth is 16 millimeters. Besides cutting, you can also use it for sanding or engraving with the included soft shaft, which holds drill bits from 0.5 to 3.2 millimeters.
For accuracy, the panel has clear markings to guide you. The body is made of cast iron, so it feels solid and should last a long time. There is a transparent baffle that stops debris from flying around.
SKIL 10 Inch Heavy Duty Worm Drive Table Saw with Stand – SPT99-11
The SKIL 10 Inch Heavy Duty Worm Drive Table Saw with Stand – SPT99-11 is built for serious cutting tasks. It uses a legendary worm drive gearing system. This gives you a deep 3-5/8 inch depth of cut. Your rip capacity is a generous 30-1/2 inches. That means you can handle thick lumber and wide panels with less hassle.
The fence system is a big deal here. It uses a precision rack and pinion design. Adjustments are quick and smooth. You slide it, lock it, and the cut is accurate.
No fiddling or second-guessing. The fence stays square to the blade, so your work stays true.
Mobility is a strong point. The saw comes on a rugged rolling stand. It has 16 inch wheels, so it rolls over rough ground or shop floors with ease. The easy-load handles make it simple to lift and move. You can take this saw from the truck to the job site without breaking your back. One person can handle the setup without a problem.
Dust control is included too.
There is a dust port elbow that directs debris into one area. It connects to a standard shop vac. This keeps your workspace cleaner and makes clean-up faster. You will spend less time sweeping and more time working.
For larger cuts, the saw has outfeed and left support. These let you handle big sheets of plywood or long boards by yourself. You do not need a helper to manage oversized material.
Mini Table Saw, Sinpiode Multi-Functional Desktop Portable Table Saw for Crafts with Adjustable Speed & Angle, All-in-One Cutting, Sanding, Engraving & Drilling Tool for Wood, Acrylic, Plastic, PCB
The Sinpiode Mini Table Saw is a tiny, multi-functional desktop tool made for small, delicate craft projects. It is not a heavy-duty saw for professionals or large woodworking tasks. This saw is for hobbyists who work with light materials like thin balsa wood, plastic sheets, PCBs, and soft metals like aluminum (up to about 3mm). Do not try to cut thick, dense woods or ferrous metals, as the motor can overload.
Before you start, please read the critical safety limits.
If you only need to sand, never install the saw blade. Both functions turn on together for safety, which means you could get hurt if you ignore this. The maximum cut thickness is just 0.59 inches (15mm). This saw is designed for small, lightweight handiwork only. It is not for professional use. If you need a powerful tool for big jobs, this is not the right choice for you.
The saw is very compact. It measures only 7.48 x 8.66 x 2.17 inches, about the size of an open hand.
This makes it perfect for a small workbench or desk. It comes with four specialized blades: a PCB cutter, an HSS blade, an alloy blade, and a resin blade. Each blade is for a different type of light material.
The motor is a compact 100W unit with a max speed of 6000 RPM. You can adjust the speed to one of seven settings. This lets you match the speed to your specific task for a clean, controlled finish. Always use the saw on a stable surface to keep your work precise.
Used Table Saws For Sale Buying Guide
Finding used table saws for sale requires inspecting teh motor, fence, and overall condition carefully. You don’t want to end up with a machine that shakes, burns wood, or won’t cut straight. Buying used saves you money, but only if you know what to look for. Let’s break down the key factors to check before you hand over your cash.
Motor Power and Condition
How strong is the motor? Most contractor saws run on 120V, while cabinet saws need 240V. Listen to it run. Does it hum smoothly or make grinding noises? A dirty motor can overheat fast. Bring a test board and cut through some hardwood. If the saw bogs down or the blade stops, walk away. Also, check for rust inside the motor housing—that’s a red flag.
The Fence System
The fence is the heart of accuracy. A wobbly fence makes precise cuts almost impossible. Push the fence along the rails. Does it lock tight without shifting? Look for a T-square style fence—thay hold alignment better. If the fence has dents or bends, replacement parts can get expensive. Test it by cutting a straight line and measuring both ends of the board. They should match within 1/32 of an inch.
Table Surface and Rust
Run your hand across the cast iron table. Surface rust is common and usually fixable with sandpaper and elbow grease. But deep pitting? That’s trouble. It will snag your wood and ruin cuts. Check for flatness using a straightedge. A warped table causes unsafe kickback. Also, look at the miter slots—they should be clean and free of gunk.
Blade Guard and Safety Features
Don’t ignore safety. Is the blade guard included? Many used saws are missing them. You can buy a replacement, but factor that cost in. Test the riving knife—it should move up and down smoothly. A missing riving knife increases kickback risk. Also, check the emergency stop button if it has one. These things matter more than you think.
Arbor and Trunnion Wear
Lift the blade up and down. Does it move smoothly? Listen for clunks or grinding. The arbor should spin true—wobble means bad bearings. Trunnions (the parts holding the blade assembly) can crack over time. Inspect them with a flashlight. A cracked trunnion is a deal breaker, repairs often cost more than the saws value.
Frequently Asked Questions About Used Table Saws For Sale
What should I check when buying a used table saw?
First, look at teh blade alignment. It should be parallel to the miter slots. Check the fence for squareness and smooth movement. Test the arbor for wobble by spinning it. Listen for strange noises from the motor. Also, inspect the table surface for rust or deep scratches. A little surface rust is okay, but deep pitting can cause problems.
Is it worth buying a used table saw?
Yes, it can be a great deal. You often get a higher quality saw for the same money as a new budget model. But you need to be careful. Older saws might have worn parts. Check the condition carefully before you buy. A well-maintained used saw can last for many years.
What are common problems with used table saws?
Common issues include a bent arbor, worn belts, and a misaligned fence. The trunnions can also get damaged if the saw was dropped. Look for cracks in the cast iron table. Motors can lose power over time. Test everything if you can. Don’t forget to check the blade guard and riving knife are present.
How do I test a used table saw motor?
Plug it in and turn it on. Listen for a smooth, steady hum. No grinding or clicking sounds. Let it run for a minute. Then turn it off and listen for any drag or noise. Check the start capacitor if it struggles to start. Make sure the switch works properly. Always test it before you hand over any money.
What brands are best for used table saws?
Look for brands like Delta, Jet, Powermatic, and SawStop. These are known for durability and parts availability. Older Craftsman saws from the 1980s are also good. Avoid cheap off-brand models. They are hard to fix and parts are hard to find. Stick with reputable brands for a safer buy.
Should I buy a contractor or cabinet saw used?
It depends on your needs. Contractor saws are lighter and easier to move. Cabinet saws are heavier and more stable. Cabinet saws have better dust collection and more power. If you have space, a used cabinet saw is a great choice. For a small shop, a contractor saw works fine.
How much should I pay for a used table saw?
Prices vary a lot. A basic used contractor saw can cost $100 to $300. A good used cabinet saw can run $500 to $1500. Check local listings for your area. Compare prices on similar models. Don’t pay more than 60% of the new price. Factor in any repairs you might need to do.
Last Thoughts Before You Buy
Smart buyers grab dependable second-hand saws that deliver pro results for less. You don’t need to spend a fortune to get clean cuts and solid performance. Just take your time with inspections. Check teh blade alignment, listen for weird noises, and test the fence if you can. A little homework goes a long way. Remember, a used saw that’s been well cared for often works just as good as a brand new one. Focus on the essentials like power, stability, and safety features. This is a practical choice that puts money back in your pocket.
When you’re ready to look, start with local listings or trusted online marketplaces. Compare prices and don’t rush. Good deals are out there, but you have to be patient. The right saw will feel solid and run smooth. By choosing smart, you get a reliable tool without the premium price tag. So keep an eye out for quality used table saws for sale and make a purchase that fits your workshop and your budget. Your next project is waiting.