Two push blocks let you guide stock from both sides for balanced, safe cuts. A good table saw push block keeps your fingers far from the blade, which is always the goal. You grip one in each hand, and they help you apply even pressure across the board. It feels a lot more stable than using a single stick or your bare hands. You get better control, and the risk of kickback drops way down.
But not all push blocks are created equal. Some are flimsy plastic, while others have a nice rubbery grip. You want one that feels solid in your hand and slides smoothly. If the block slips or the handle hurts, you won’t use it. So let’s look at what makes a great push block, and which one you should actualy pick for your workshop.
Product Comparison Table: 10 Best Table Saw Push Block
| Image | Why We Like This Product | Editor’s Rating | |
 |
GRR-RIPPER+ by Microjig. Includes SafeRip Kit. Fully Adjustable 3D…
|
9.7 |
Read Review |
 |
MICROJIG GRR-RIPPER GR-100 3D Table Saw Pushblock, Yellow
|
9.5 |
Read Review |
 |
POWERTEC Push Block and Push Stick Set Fits Table…
|
9.3 |
Read Review |
 |
Zebekk Push Block for Table Saws, Router Tables, Band…
|
9.0 |
Read Review |
 |
MICROJIG GRR-RIPPER 2GO Push Block for Routers, Jointers, Band…
|
8.8 |
Read Review |
 |
Milescraft 3406 GrabberPRO – Push block for Table Saws,…
|
8.6 |
Read Review |
 |
POWERTEC Deluxe Push Stick Fits Table Saws, Router Tables,…
|
8.4 |
Read Review |
 |
POWERTEC Deluxe Push Stick for Table Saw, Router Table,…
|
8.1 |
Read Review |
 |
Push Block for Table Saw Safety Pusher Block Woodworking…
|
7.9 |
Read Review |
 |
POWERTEC Push Block & Push Stick Fits Table Saw,…
|
7.7 |
Read Review |
Quick Review For Top 10 Table Saw Push Block
GRR-RIPPER+ by Microjig. Includes SafeRip Kit. Fully Adjustable 3D Push Block for Table Saws, Router Tables, Band Saws, and Jointers. (SKU: GR-100+) Yellow/Green
The GRR-RIPPER+ by Microjig is a fully adjustable 3D push block designed for table saws, router tables, band saws, and jointers. It comes with the new SafeRip Kit. This tool is all about giving you control while keeping your hands safe.
Lets start with safety. The GRR-RIPPER+ acts like a moving blade guard. It keeps your fingers well away from blades or bits. You don’t have to sacrifice control to stay safe. The enhanced SafeRip Kit is a big part of this.
It prevents accidental blade contact so you can make faster and cleaner cuts on the table saw. You are protected, plain and simple.
Kickback is a real danger with power tools. This push block helps you virtually eliminate it. It applies powerful downward, inward, and forward pressure all at once. This delivers cleaner cuts and prevents material burn. More importantly, it keeps the material under your control for the entire cut.
No more worrying about the wood catching and throwing back at you.
The grip is another standout feature. The proprietary Green GRR-RIP material gives you a confident hold on almost anything. Hardwoods, plywoods, and plastics all stay put, even in tricky conditions. This enhances both your safety and your productivity. Plus, the GRR-RIPPER+ comes with an exclusive limited lifetime warranty. That means the grip is protected against manufacturer defects for the life of the product.
MICROJIG GRR-RIPPER GR-100 3D Table Saw Pushblock, Yellow
The MICROJIG GRR-RIPPER GR-100 3D Table Saw Pushblock, Yellow is built for one main thing: keeping your hands safe while you work. It does this by giving you total control over the wood, even small pieces. Kickback can be scary, but this tool is designed to prevent it like never before. The grip is powerful with high-friction material, so it holds your workpiece extremly tight.
You won’t have to worry about slipping or losing control mid-cut.
One of the best features is that you can make precision cuts down to just 1/4 inch ripping. That means you can work with thin strips of wood safely, which is usualy hard to do on a table saw. The pushblock is fully adjustable, so it fits your hand and your saw setup comfortably. You don’t need to struggle with awkward angles or uncomfortable positions.
It makes handling the saw easier and more natural.
This pushblock isn’t just for table saws. You can use it on a router table, jointer, and band saw too. It works great with small stock that would otherwise be dangerous to push through by hand. The design uses 3-directional force, which means it pushes the wood down, forward, and against the fence all at once. This gives you total control of the workpiece from every angle.
POWERTEC Push Block and Push Stick Set Fits Table Saws, Router Tables, Band Saws & Jointers, Dual Ergonomic Handles w/Max Grip, Wood Pusher Reduces Kickback & Increases Safety. 5PK (71009V)
The POWERTEC Push Block and Push Stick Set 5PK (71009V) is a complete safety kit for your table saw, router table, band saw, or jointer. It comes with five pieces: one long hold down push block, one Safe V stick, one straight push stick, and two short hold down push blocks. This set is designed to keep your hands away from the blade while you work.
Each tool has a specific job. The push blocks are great for face jointing, ripping plywood, and routing.
They let you apply firm, steady downward pressure on the workpiece. You won’t get that annoying bounce or chatter as the wood crosses the cutters. The blocks keep the wood flat and stable, which reduces the chance of kickback. The push sticks work differently. The L-shaped stick, sometimes called a V push stick, helps you push the entire workpiece through the blade. It’s ideal for finishing a cut when your hands would get to close to the blade.
The straight push stick is narrower, so it works well in tight spaces or with smaller stock. Both sticks are useful on jointers, table saws, router tables, and shapers.
Grip is a big deal here. Each handle has an ergonomic design that feels natural in your hand. The grip is easy to hold, even when you have sawdust or sweat on your palms. It gives you max control without slipping. The whole set was built with a safety-first approach.
Zebekk Push Block for Table Saws, Router Tables, Band Saws & Jointers – Cuts Safe – Easy to Assembly
The Zebekk Push Block for Table Saws, Router Tables, Band Saws & Jointers – Cuts Safe is a simple tool that focuses on one thing: keeping your hands away from the blade while you work. It is designed to make narrow rip cuts safer without a lot of fuss.
One of the main features is the multidirectional force control. This means you can apply pressure from different angles to keep the workpiece steady.
The bottom of the block has a non-slip material that has a strong grip and resists friction. This helps protect your hands and reduces the chance of kickback. If you have ever felt nervous pushing a thin piece of wood through a saw, this block gives you a safer way to do it.
Assembly is straightforward. There is no frustrating setup or confusing instructions. You just install the handle and the side parts, and you are ready to go.
It takes only a few minutes, so you can spend more time on your project and less time fiddling with tools.
The push block is fully adjustable for precision cutting. The top sliding adjustment design lets you easily control the crop width. You can make your table saw cuts as narrow as 1/4 inch ripping. This level of control is helpful when you are working on detailed joinery or need consistent strips of wood for a project.
It is also very compatible with different machines.
MICROJIG GRR-RIPPER 2GO Push Block for Routers, Jointers, Band and Table Saws, Woodworking Tool, Extreme Grip, GR2-GO, Yellow/Green
The MICROJIG GRR-RIPPER 2GO Push Block is a woodworking tool designed to give you more control and safety when using table saws, routers, jointers, and band saws. It comes in a bright yellow and green color scheme, so you’ll always spot it on your workbench. You do not need to assemble anything. It arrives ready to use, with a Color Code Index sticker for your rip fence scale, a clearance step, and dovetail grooves for adding your own custom accessories.
If you are making longer cuts, you can simply use two of these push blocks together for extra stability.
The main feature is the strong grip. The Green GRIP non-slip surface holds onto your workpiece securely. This gives you stable control as you push wood through the blade. The ergonomic handle fits comfortably in your hand, so you can focus on the cut instead of worrying about slipping.
This push block is designed in the USA and built to last.
Kickback is a real danger in the workshop. The GRR-RIPPER 2GO helps prevent it with a precision leg and tunnel system. This design feeds and controls both sides of the cut at the same time. It keeps the material pressed flat against the fence and the table. By doing this, it virtually eliminates kickback and gives you superior control over the entire process.
Milescraft 3406 GrabberPRO – Push block for Table Saws, Router Tables, Band Saws & Jointers
The Milescraft 3406 GrabberPRO is a push block designed for table saws, router tables, band saws, and jointers. It focuses on giving you better control and safety during your cuts. Lets be clear: this tool is about keeping your hands away from the blade while maintaining pressure on the workpiece. Woodworking safety is the main idea here. The GrabberPRO helps reduce kickback by keeping contact on both sides of the blade as you pass over your cut.
That means the wood is less likely to catch or jerk back at you. The design of the handle also helps you maintain maximum contact on the piece, so you can finish cuts safely without binding or kickback. It is fully adjustable. You get four sets of legs that can be swapped out and repositioned to fit different jobs. The kit includes 1-inch, 1/2-inch, 1/4-inch, and 1/8-inch legs. This lets you change the grip height or the offset from the fence depending on what your cutting.
You can really dial it in for thin strips or thicker boards. For accurate rips, this tool shines. You can cut clean, precise strips as small as 1/8 inch thick. That is hard to do safley with just a standard push stick. The adjustable legs give you the stability needed to keep thin stock flat against the fence and the table throughout the cut. Complete control is another feature.
POWERTEC Deluxe Push Stick Fits Table Saws, Router Tables, Band Saws & Jointers. Ergonomic Handles Safety Push Tool for Wood working and Hand Protection. 2PK (71511)
The POWERTEC Deluxe Push Stick Fits Table Saws, Router Tables, Band Saws & Jointers. Ergonomic Handles Safety Push Tool for Wood working and Hand Protection. 2PK (71511) is a two-piece set built to keep your hands clear of blades and cutters while you work. You get two distinct tools: one magnetic push stick that measures 11-21/32 inches long with a 9/16 inch notch, and one L-shaped push stick that is 8-21/32 by 5-15/16 inches with a pad width of 35/64 inches.
The magnetic version is handy—it sticks to your saw or metal stand, so you always know where it is. The main job here is simple: protect your hands and give you solid control over your workpiece. When you push wood through a table saw, band saw, router table, or jointer, these sticks keep your fingers away from the spinning blade or cutting head. They help you guide the material smoothly and safley.
You can use them with table saws, radial arm saws, bandsaws, shapers, router tables, and jointers. If you run a lot of stock through your shop, this set gives you two different shapes for different cuts and angles. Construction wise, these are built to last. Occasional contact with a blade is almost unavoidable in woodworking, so they are made from durable material that can take that abuse. The design includes cleats, notches, and non-slip surfaces that grip your workpiece firmly.
POWERTEC Deluxe Push Stick for Table Saw, Router Table, Band Saw & Jointer, Dual Ergonomic Handles w/Max Grip, Safety Push Tool for Wood working and Hand Protection 2PK (71338)
The POWERTEC Deluxe Push Stick for Table Saw, Router Table, Band Saw & Jointer, Dual Ergonomic Handles w/Max Grip, Safety Push Tool for Wood working and Hand Protection 2PK (71338) is a set of two L-shaped push sticks designed to keep your hands safe during cutting and shaping tasks. These are not your basic shop accessories. They are built to give you control while keeping your fingers well away from blades and cutters.
Each stick has a dual ergonomic handle system.
The main handle feels natural in your hand, and the second handle gives you extra leverage. That means you can push the workpiece down and forward with one tool, instead of juggling multiple items. The grip is excellent. The Max Grip texture helps you hold on even when your hands get a little sweaty or dusty from the workshop.
These push sticks work with a variety of machines. Use them on a table saw, router table, band saw, or jointer.
They are sometimes called V push sticks because of the shape. That shape lets you apply pressure from two angles at once. You can guide the wood flat against the table and tight against the fence at the same time. This makes your cuts more accurate and reduces the chance of kickback.
The construction is solid. POWERTEC used well crafted materials that hold up over time.
Push Block for Table Saw Safety Pusher Block Woodworking Accessories Pusher Safe and Stable for table saw Router table Jointer Band Adjustable
The Generic Table Saw Push Block is a woodworking accessory designed to keep your hands safe while you work. It works on table saws, router tables, jointers, and band saws. You get one tool that fits multiple machines, which saves you money and space in your shop.
Safety is the main point here. The push block keeps your fingers away from the blade. Its special shape and non-slip materials help you keep a steady grip.
This lowers the chance of accidents, even when you are pushing wood through a fast-spinning blade. You can feel more confident making cuts because your hands stay out of the danger zone.
The height and bottom width adjust by sliding. This is handy because you can set it up for different thicknesses of wood. It also stops the screws from falling out and getting lost. No more digging around on the floor for tiny parts.
The adjustment is simple and works well for both small and large pieces of wood.
Stability comes from the high-friction material on the bottom. It grabs the wood surface and stops slipping. When you are moving a big board through a jointer or a wide panel on a table saw, the push block stays put. You get good control and the wood does not shift unexpected. This makes your work more accurate and less stressful.
The handle is ergonomic, so it feels natural in your hand.
POWERTEC Push Block & Push Stick Fits Table Saw, Router Table, Band Saw & Jointer, Ergonomic Handles, Max Grip, Wood Pusher Reduces Kickback & Increases Safety for Wood working Accessories. 5PK(71009)
The POWERTEC Push Block & Push Stick 5PK (71009) is a set of five safety tools designed to keep your hands away from sharp blades while you work. You get one long hold down push block, two short hold down push blocks, one Safe V stick, and one straight push stick. Thats a total of five pieces, all in a bright orange color so you can see them easily on your workbench.
The push blocks are made to give you a firm grip on your workpiece.
They let you apply steady downward pressure as you guide wood through a table saw, router table, or jointer. The rubber soles on the bottom of the blocks grip the wood tightly. This stops the wood from bouncing or chattering as it moves across the cutter blades. The ergonomic handles feel natural in your hand, so you can work for longer without discomfort.
The push sticks work a bit differently.
The L-shaped stick, also called a Safe V stick, is great for pushing the entire workpiece through the blades. It gives you extra control at the end of a cut. The straight push stick is narrower, which is handy when you have limited space around the blade. Both sticks are useful for working with smaller stock where your hands would otherwise be to close to danger.
These tools are built from tough, durable plastic that lasts a long time. The rubber soles are firm and help prevent slipping.
Table Saw Push Block Buying Guide
Keep your hands safe while pushing narrow stock through the blade. It’s a simple idea, but one that many woodworkers overlook until it’s too late. You have probably used a scrap piece of wood as a push stick before. We’ve all been there. But a proper table saw push block gives you more control and keeps your fingers far away from danger. So what should you look for when buying one?
Grip and Handle Design
Your push block needs to feel secure in your hand. Look for a handle that fits your grip naturally. Rubberized coatings help when your hands get sweaty. A handle that is too thin or too thick can cause you to lose control. That is a risk you don’t want to take. Some models have a high handle that keeps your hand above the blade line. Others have a low profile for more precise control. Which feels better to you?
Base Material and Sole
The bottom of the push block matters alot. A hard plastic sole slides smoothly over the table saw surface. It reduces friction and helps you guide the wood evenly. Some push blocks use a felt or foam base. These can grip the wood better, but thay might wear out faster. You want something that won’t scratch your table saw’s surface. Check if the base is replaceable. That can save you money in the long run.
Heel and Kickback Protection
Here is a common pain point. You are pushing wood through the blade, and the piece starts to kick back. It happens fast. A good push block has a tall heel at the back. This stops the wood from lifting off the table. It also prevents kickback by keeping the stock flat. Without this feature, you are just asking for trouble. Make sure the heel is sturdy and won’t flex under pressure.
Adjustability and Versatility
Can the push block adjust to different stock thicknesses? Some models have a pivoting heel. Others have interchangeable bases. This makes them usefull for both thin and thick boards. You don’t want to buy a separate push block for every project. One versatile tool can handle most of your needs. It is a smart investment for any workshop.
Frequently Asked Questions About Table Saw Push Block
What exactly is a table saw push block?
A table saw push block is a safety tool. You use it to guide wood through teh blade. It keeps your hands away from the spinning blade. Most push blocks have a handle and a non-slip base. They give you better control and reduce kickback risks.
Do I really need a push block for my table saw?
Yes, you should always use one. It protects your fingers from serious injury. Even expert woodworkers use them. A push block helps you make clean, safe cuts. It is a small investment for big safety.
What types of push blocks are available?
There are three common types. The first is the standard block with a rubber bottom. It works for most ripping and crosscutting. The second is the “grr-ripper” style. It has multiple paddles and holds wood firmly. The third is a simple stick with a notch. It is basic but effective for narrow pieces.
How do I choose the right push block for my needs?
Think about the wood you cut most. For wide boards, a large block is best. For thin strips, a push stick works better. Look for a comfortable handle. Check that the base grips well. Avoid blocks that feel flimsy or cheap.
Can I use a push block with a miter gauge?
Yes, you can. A push block helps you keep pressure on the wood. It works well when you cut angles or grooves. Just make sure the block clears the blade safely.
How do I maintain my push block?
Keep it clean. Sawdust can make it slippery. Wipe it with a damp cloth. Check the rubber base often. Replace it if the grip wears down. Store it near your saw for easy access.
Are there any safety tips for using a push block?
Always use two hands. One on the push block, one on the wood. Never reach over the blade. Push slowly and steadily. Keep your body to the side. If the wood binds, stop the saw first.
Is a push block the same as a push stick?
No, they are diffrent. A push stick is long and narrow. You hold it like a pencil. It works for narrow cuts. A push block has a handle and more surface area. It gives better control for wider boards. Both are useful, but a block is safer for most jobs.
Quick Recap
These blocks offer steady control for every pass through teh blade. You need your hands far from the spinning teeth. A good push block grips the wood firmly and keeps your fingers safe. This simple tool makes a big difference in how you work. It gives you confidence and precision with each cut. No more worrying about kickback or slipping material. Just smooth, safe operation every time. Your projects will turn out better because you can focus on the cut, not on staying safe.
When you add a quality table saw push block to your shop, you get more than just a safety device. You get a reliable partner for your woodworking tasks. It helps you handle even tricky pieces with ease. The right one fits your hand well and lasts for years. So pick one that feels good and matches your saw. Then get back to making things you’re proud of. Your fingers will thank you, and your work will show the difference.