A router extension for table saw combines two tools into one versatile workstation. You get precise routing capabilities right next to your saw’s rip fence. It’s a space saver for any workshop. But it’s more than just a convenience. This add-on turns your table saw into a multi-functional powerhouse. You can shape edges, cut dados, and make raised panels without switching machines. The router extension for table saw mounts directly to your saw’s extension wing. It uses your existing fence for guidance. That means less setup time and more consistent results.
Here’s the real kicker: you can switch between routing and sawing in seconds. No more shuffling tools around or cluttering your workspace with separate machines. It’s perfect if you are tight on space or just want to streamline your workflow. The learning curve is minimal too. You already know how your saw works. Now you are adding a new skill set with minimal fuss. Just make sure you’ve got the right mounting kit for your specific saw model. Some kits are universal, but others need a bit of adaption.
Product Comparison Table: 9 Best Router Extension For Table Saw
| Image | Why We Like This Product | Editor’s Rating | |
 |
Milescraft 3406 GrabberPRO – Push block for Table Saws,…
|
9.8 |
Read Review |
 |
Paddle Switch for Table Saw, 110V to 120V Single…
|
9.6 |
Read Review |
 |
KAGYIFLY Router Table Setup Bars, 7pcs Aluminum Precision Setup…
|
9.4 |
Read Review |
 |
TOOLCOOL One Way Bearing Roller Featherboards Feather Boards for…
|
9.2 |
Read Review |
 |
Woodpeckers Auxiliary Rip Fence, 36 Inch Job Site Table…
|
9.1 |
Read Review |
 |
SawStop RT-TGP Assembly: TGP2 27″ In-Line Router Table
|
8.9 |
Read Review |
 |
Peachtree Woodworking Supply 16″ Table Saw Extension Kit PW1007
|
8.7 |
Read Review |
 |
Cast Iron Table Saw Router Extension Wing, 27 inches…
|
8.5 |
Read Review |
 |
Shop Fox D3108 Extension Table for Table Saw
|
8.3 |
Read Review |
Quick Review For Top 9 Router Extension For Table Saw
Milescraft 3406 GrabberPRO – Push block for Table Saws, Router Tables, Band Saws & Jointers
The Milescraft 3406 GrabberPRO is a push block designed for table saws, router tables, band saws, and jointers. It helps you keep your hands safe while making precise cuts. This tool is all about giving you more control and reducing the risk of kickback, which is a common concern in woodworking.
One of the main features is its focus on safety. The design helps reduce kickback by keeping contact on both sides of the blade as you pass over your cut.
This means the wood stays stable and you have less chance of it flying back at you. The handle is shaped to help you maintain maximum contact on the workpiece, so you can safely finish cuts without binding or kickback. It is a simple way to add a layer of protection to your routine.
The GrabberPRO is fully adjustable, which makes it versitile for different jobs. It comes with four sets of legs: 1 inch, 1/2 inch, 1/4 inch, and 1/8 inch.
You can switch them out depending on the thickness of the material you are working with. This customization lets you set up the push block exactly how you need it for each project. The legs are interchangable, so you can swap them quickly without any tools.
If you need to rip thin strips, this tool can help. You can cut clean, precise strips as small as 1/8 inch thick. This is handy for making thin pieces for joinery or other detailed work. The adjustable heel is another useful feature.
Paddle Switch for Table Saw, 110V to 120V Single Phase On/Off Switch with Large OFF Paddle for Emergency Stop, Power Switch with Heavy Duty Extension Cord, Fits Table Saw | Router Table | Drill Press
The ‘Paddle Switch for Table Saw, 110V to 120V Single Phase On/Off Switch with Large OFF Paddle for Emergency Stop, Power Switch with Heavy Duty Extension Cord, Fits Table Saw | Router Table | Drill Press’ is a straightforward safety tool for your workshop. It is built to give you quick control over your power tools without fumbling for a small button.
This switch is all about hands-free operation. The large red paddle is designed so you can hit it with your knee, thigh, or hip.
If something goes wrong, you dont have to let go of your workpiece or reach awkwardly. Just bump the paddle and the power cuts. It is a simple move that can prevent an accident. The paddle also has a waterproof and dustproof plastic cover. This means it holds up well in a messy workshop where sawdust and spills are common.
The unit comes with heavy-duty extension cords already attached. There is a 5.5-foot male cord and a 1.5-foot female cord.
They are both pre-wired, so you don’t need to buy extra cables or do any complex wiring. Just plug the male end into your wall outlet and the female end into your tool. The three-prong plug and socket fit most standard power machinery. It supports up to 16 amps at 110V to 120V, which covers most table saws, router tables, and drill presses. It is CE-certified and meets TUV standards, and the cord itself is UL-certified.
Instalation is easy. Two screws are included.
KAGYIFLY Router Table Setup Bars, 7pcs Aluminum Precision Setup Blocks Height Gauge Set for Router Table Saw Accessories and Angle Woodworking Set Up(Each Block has Different Thickness)
The KAGYIFLY Router Table Setup Bars, a 7-piece aluminum precision setup block set, gives you a straightforward way to get consistent results in your woodworking. Each block has a different thickness, and here is the neat part: the thickness, height, and depth of each gauge are all the same size. So you can measure fixed depths or heights, or you can simply stack them together to get a wide range of sizes. It is flexible and practical without any extra fuss.
This is a 4-in-1 tool.
You can use it as a height gauge, a depth gauge, a square stack gauge, and even an angle gauge. It basically combines traditional depth and height gauges with the simplicity of building blocks. The sizes are 1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, and 1/2″. You can use the blocks individually or stack them up. There are hundreds of combinations possible, so you can cover most of your setup needs without buying extra gear.
The set is made from aluminum alloy with a smooth, anodized finish.
This helps protect your hands, your router bits, and your table saw from scratches or damage. The laser carving labels are clear and they won’t fade over time, which makes reading the sizes easy. You wont have to squint or guess. A storage case is included, so the blocks stay safe during shipping and when you are not using them.
One thing to keep in mind is that the blocks are precision, but they are not certified. For general woodworking and router table setups, they work perfectly.
TOOLCOOL One Way Bearing Roller Featherboards Feather Boards for Table Saw Router Tables Band Saws Jig Guide Table Saw Accessories
The TOOLCOOL One Way Bearing Roller Featherboards is a table saw accessory built for safety and smooth operation. Instead of the usual plastic fingers that can drag and wear out, this featherboard uses bearing rollers. These rollers spin freely as you push wood through, which greatly reduces friction and makes feeding feel much smoother. The rollers are spring-loaded, so they keep constant pressure on the workpiece even if it has curves or uneven areas.
That means your material stays tight against the fence without you having to fight it. One of the standout safety features is the one way bearing system. The wheels roll freely in the feed direction, but they lock up if the wood tries to move backward. This prevents kickback, which is a major cause of accidents in the shop. It gives you a lot more confidence when ripping or routing. You can also adjust the pressure of the wheels by turning the brass knob.
If you set it to maximum pressure, the wheels lose tension and the unit can double as a table saw thin rip jig. This is a handy trick for making those narrow cuts safely. The adjustable range is from 0.9 to 7.4 inches from the center of the T-slot, giving you plenty of leeway to work with stock of various thicknesses. At its maximum length, it can reach your blade, which is crucial for proper support.
Woodpeckers Auxiliary Rip Fence, 36 Inch Job Site Table Saw Fence Extension, Infeed or Outfeed Support, T-Track Slots, Clamping Blocks – ARF-BSCS
The Woodpeckers Auxiliary Rip Fence, 36 Inch Job Site Table Saw Fence Extension, ARF-BSCS is a add-on that gives your small saw big saw capability. It is a 36 inch long fence that stands 3-1/2 inches tall. This gives you a full 7 inches of material support on both the infeed and outfeed sides of your blade. That extra support is key for keeping long boards steady and cuts straight. The fence itself and the included clamping blocks both measure exactly 2 inches thick.
This is a intentional design choice. It lets you use standard miter gauge accessories and measuring tools without having to guess or adjust.
This fence is sized for compact machines. It works great on job site table saws, band saws, vintage contractor saws, and even router tables. If your saw has a smaller footprint, this fence won’t overwhelm it. It is built to fit right in. Setup is really quick. You dont need to modify your existing fence at all.
Just use standard track clamps (these are not included) and you are up and running in seconds. Removal is just as fast when you need to switch back.
The ARF-BSCS comes with two sliding clamping blocks. These blocks ride in the built in T-track slots on the fence face. You can slide them to exactly where you need them to hold your workpiece tight against the fence. The T-track slots also let you add other jigs or stops you might have.
SawStop RT-TGP Assembly: TGP2 27" In-Line Router Table
The SawStop RT-TGP Assembly: TGP2 27″ In-Line Router Table is a solid choice if you want a dedicated setup for your router without buying a full cabinet saw. This assembly gives you the core parts you need to get started. It comes with four main items: the rt-c27 27-inch cast iron table, the rt-f27 27-inch fence, the rt-psw power switch, and the rt-st2 support legs.
You get everything in one box, so you don’t have to hunt down separate components.
The table surface is cast iron, measuring 27 inches by 16 inches. That gives you a stable, flat work area. Cast iron is great because it resists warping and reduces vibration. The router plate opening is 11 3/4 inches by 9 1/4 inches. This opening is large enough to fit most standard router plates and lift systems. You should be able to mount your router without too much trouble.
The support legs are sturdy, but you will need to mount this table to a workbench or a mobile base for stability. The legs alone wont hold it steady if you push hard against the fence.
Now lets talk about the fence. The 27-inch fence assembly is actually 30 3/4 inches long, 3 1/2 inches tall, and 4 inches wide. It is built to be straight and rigid. The max fence travel is 5 1/2 inches. That means you can move the fence up to 5 1/2 inches away from the bit.
Peachtree Woodworking Supply 16" Table Saw Extension Kit PW1007
The Peachtree Woodworking Supply 16″ Table Saw Extension Kit PW1007 is a practical add-on for anyone looking to increase their table saws capacity. This kit gives you the parts you need to build a sturdy outfeed or support table, but you will need to supply your own wood platform and saw. It is not a complete table, just the hardware and plan to make one.
Here is what you get in the box. First, there are two 24-inch sections of T-track, which are a $25.95 value.
These tracks are great for holding jigs, stops, or clamps, giving you more control over your work. You also get two 11-inch table brackets, worth $12.99. These brackets are used to connect the extension to your saw, providing a stable base. A single 32-inch miter track is included, valued at $12.99, which lets you use your miter gauge on the extension table.
Finally, the kit comes with four star knobs and bolts, a $6.00 value, for easy tightening and adjustments.
The most important part might be the extension table plan, which is valued at $8.99. This plan walks you through how to cut your wood and assemble everything. It tells you the dimensions and the steps to follow, so you dont have to guess.
Cast Iron Table Saw Router Extension Wing, 27 inches by 16 inches, Fits Most Standard Size Contractor and Cabinet Table Saws, 9-1/4 inch by 11-3/4 inch Plate Opening, Premium Router Plate
The Cast Iron Table Saw Router Extension Wing is a 27-inch by 16-inch add-on that turns your table saw into a dual-purpose workstation. It fits most standard size contractor and cabinet table saws, and it includes a 9-1/4 inch by 11-3/4 inch plate opening with a premium router plate.
This wing is built from 1½-inch thick cast iron. That thickness is key. It stops vibration so you get smooth, accurate cuts every time.
The surface is machined flat to exacting standards, which means your work stays stable and your results stay professional. You don’t have to fight with wobbly parts or inconsistent depths. The heavy-duty construction holds up to demanding jobs without wearing down.
If you work in a small shop, you’ll appreciate how this saves space. It mounts directly to your existing saw, so you don’t need a separate router table. You get the extra capability without giving up any floor area.
The pre-drilled mounting holes make installation straightfoward. You can have it set up and running with minimal fuss.
The lift-out insert is a real time-saver. It lets you swap router bits or do maintenance without taking the whole thing apart. You just pop it out, make your change, and drop it back in. This flexibility means you spend less time adjusting and more time on your actual projects.
Shop Fox D3108 Extension Table for Table Saw
The Shop Fox D3108 Extension Table for Table Saw is a simple add-on that gives you more room to work. It is designed to be a straight forward solution for those times when your table saw surface just feels to small. The whole point is extra support, and it delivers on that promise without any complicated setup.
The table measures 27 inches by 44 inches. That is a decent amount of space. You can place it on the left or right side of your saw, depending on your shop layout.
It gives you a stable platform for larger sheets of plywood or long boards. When you are cutting a full sheet of MDF or a long piece of trim, that extra surface keeps the material from tipping or binding. It makes the cut safer and more accurate.
You get two legs and all the hardware included in the box. That is a nice touch because you don’t have to run to the store for extra bolts or brackets. The legs provide solid support so the table does not sag under heavy material.
The hardware is standard and should fit most common table saw models. You will want to check your saws mounting holes before you start, but it is usually a plug-and-play kind of install.
Assembly is pretty basic. You attach the extension table to your saws existing frame, put the legs on, and you are ready to go. It does not require any special tools or advanced skills. Just a few wrenches and maybe a second pair of hands to hold things steady while you bolt it up.
Router Extension For Table Saw Buying Guide
A router extension for a table saw lets you use router bits; ensure it fits your saw’s table. It’s a simple way to turn your saw into a combo tool, saving shop space and money. But not all extensions are created equal. Some bolt right on, others need a bit of tinkering. You want something that feels solid and stays flat.
Mounting and Compatibility
Does the extension actually fit your saw? Measure your table’s mounting holes and the distance from the blade slot. Many brands have specific models for their saws. Universal kits often need you to drill your own holes, which is doable but takes time. Check if the bracket is steel or aluminum. Steel holds up better under heavy router use. A wobbly mount is a pain point—it ruins cuts and frustrates you.
Material and Flatness
The extension surface must be dead flat. Aluminum is common, but some are steel or cast iron. Cast iron stays flat but rusts fast. Aluminum is lighter and resists rust, but it can bend if too thin. Run your hand across the surface. Any dip or bump will mess up your work. A true flat top is non-negotiable for clean routing.
Fence Integration
How does the fence line up? A good extension has a slot for your saw’s fence to slide through. Without it, you can’t make accurate cuts. Some extensions come with a seperate fence, but most rely on your table saw fence. Test the fence travel. If it snags on the extension edge, you’ll hate using it. Look for a smooth transition between the saw top and the extension.
Router Plate Quality
The plate that holds your router matters a lot. Plastic plates flex and warp over time. Aluminum plates are better, but thay can still dent. Look for a plate with leveling screws. These let you adjust the plate flush with the table surface. A recessed plate catches wood and ruins your feed. A proud plate lifts your workpiece. Go with a plate that sits perfectly even.
Frequently Asked Questions About Router Extension For Table Saw
What exactly is a router extension for a table saw?
It is a metal or plastic plate that attaches to your table saw’s fence. You mount your router to it. This lets you use your saw’s fence to guide router cuts. It gives you more control and precision.
Will this work with my table saw model?
Most router extensions are universal. They fit standard table saw fences. But you should check the dimensions. Measure your fence’s width and height. Look for product specifications. Some extensions are designed for specific brands like Delta or Dewalt.
Do I need to drill holes for my router?
Yes, most extensions come with a blank plate. You have to drill your own mounting holes. But some have pre-drilled patterns for popular routers. Check the product description. You might save time if your router matches the pattern.
Is it hard to install a router extension?
Not at all. It’s a simple DIY job. You attach the plate to your fence with screws. Then you mount your router to the plate. The whole process takes about 20 minutes. You only need basic tools like a drill and screwdriver.
Can I use this with a handheld router?
Yes, these extensions work with most handheld routers. You just remove the router’s base plate. Then screw it onto the extension. Make sure your router is not too heavy. Some larger routers might be to big for smaller extensions.
Will it affect my saw’s accuracy?
Actually, it improves accuracy. The fence keeps your router cuts straight. You get consistent results every time. Just make sure the plate is level. A misaligned extension can cause problems. Take your time during setup.
What materials can I router with this setup?
You can work with wood, plywood, and MDF. Some extensions handle aluminum too. Avoid routing hard metals or plastics. That could damage your router or the plate. Always use sharp bits for clean cuts.
Is the extension durable?
Most are made from aluminum or steel. They hold up well to regular use. But check the thickness. Thicker plates are more stable. Look for ones with anti-slip coating. That keeps your router from moving.
Does it include mounting hardware?
Yes, most come with screws and washers. But you might need your own bolts for the router. Read the package details. Some kits include everything you need. Others require a trip to the hardware store.
Our Final Words
This article has covered teh essential information you need to make an informed decision. We’ve examined the key features and considerations that matter most when choosing the right product for your needs.
When thinking about router extension for table saw, remember to focus on what works best for your specific situation. The ideal choice depends on your individual requirements and preferences. Take your time to evaluate all the options carefully.