Rip and crosscut aluminum tubing and sheet steel safely on a dedicated table. That’s exactly what a metal table saw lets you do, and it’s a game-changer for your workshop. You don’t want to risk ruining your wood blade or, worse, your safety. This tool is built tough for the job. It handles non-ferrous metals with ease, giving you clean, accurate cuts every time.
You’ll appreciate how much smoother your projects go. No more worrying about sparks or kickback. Just set your material, guide it through, and your done. It’s a solid investment if you work with metal regularly. Trust me, once you try it, you won’t look back at your old methods. Ready to see what it can do?
Product Comparison Table: 7 Best Metal Table Saw
| Image | Why We Like This Product | Editor’s Rating | |
 |
SKIL 15 Amp 10 Inch Portable Jobsite Table Saw…
|
9.9 |
Read Review |
 |
DEWALT Table Saw 10 Inch with Foldable Rolling Table…
|
9.6 |
Read Review |
 |
DEWALT 15 Amp 8-1/4 in. Compact Portable Jobsite Table…
|
9.3 |
Read Review |
 |
Mini Table Saw for Crafts[Dual 795 Motors & Switches]…
|
8.9 |
Read Review |
 |
MIMYTH Mini Table Saw for Crafts, Multifunctional Portable Table…
|
8.6 |
Read Review |
 |
Table Saw 10 Inch, 15 Amp 5000RPM Powerful Tablesaw…
|
8.3 |
Read Review |
 |
Evolution R8MTS 8-1/4″ Convertible Miter/Table Saw – Multi-Function Saw…
|
8.0 |
Read Review |
Quick Review For Top 7 Metal Table Saw
SKIL 15 Amp 10 Inch Portable Jobsite Table Saw with Folding Stand- TS6307-00
The SKIL 15 Amp 10 Inch Portable Jobsite Table Saw with Folding Stand- TS6307-00 is built for straightforward, reliable cutting on the job. You get a 15 amp motor that delivers plenty of power to handle common framing and trim materials, and the 10 inch blade can cut through material up to 4×4 lumber at 90 degrees. That means you can handle standard dimensional lumber without struggle.
The fence system uses rack and pinion rails.
This design keeps the fence parallel to the blade as you move it, so your cuts stay accurate without constant re-measuring. It slides smoothly and locks firmly in place, which is helpful when you are making repeated cuts and want consistency. You also have a micro-adjustment for the blade alignment. This lets you fine-tune the blade so it runs exactly parallel to the rip fence and the miter slot.
It is a simple adjustment, but it makes a real difference in cut quality over time.
For bevel cuts, the saw has a 2 to 47 degree capacity. There are positive stops at 0 and 45 degrees, and you release the lever to move between them quickly. This is handy when you switch from crosscuts to angled cuts. The bevel adjustment is not fussy, it just works.
Portability is a strong point here. The saw includes an integrated folding stand.
DEWALT Table Saw 10 Inch with Foldable Rolling Table Saw Stand, 15 Amp, 4800 RPM, 32-1/2-Inch Rip Capacity (DWE7491RS)
The DEWALT Table Saw 10 Inch with Foldable Rolling Table Saw Stand, 15 Amp, 4800 RPM, 32-1/2-Inch Rip Capacity (DWE7491RS) is a portable saw built for accuracy and ease of transport. You get a 15 amp motor that spins at 4800 RPM, so it cuts through hardwoods without bogging down. The 32-1/2 inch rip capacity means you can handle larger shelving and trim materials with less hassle.
The rack and pinion telescoping fence system lets you adjust the fence fast, smoothly, and accurately.
It locks in place cleanly, so your cuts stay true. The fence rails retract when you are done, making the whole unit more compact for storage or moving.
You also get a patented material support system. This feature is handy for narrow rip cuts, where you need to keep the workpiece stable without extra outfeed gear. The table itself is 21-7/8 by 26-3/8 inches, offering solid support for your material.
Depth of cut is 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees.
The folding rolling stand is designed for quick setup and breakdown. It has wheels so you can roll it around the jobsite, and the legs fold up easily. The stand provides good stability for a portable saw, so you dont feel like it will tip over during heavy cuts.
Onboard storage is a real time saver.
DEWALT 15 Amp 8-1/4 in. Compact Portable Jobsite Table Saw (DWE7485)
The DEWALT 15 Amp 8-1/4 in. Compact Portable Jobsite Table Saw (DWE7485) is built for actual work. Its designed to handle full sheets of material without taking up your whole truck bed or shop floor. You get a 24.5-inch rip capacity, which is enough to rip down a 4×8 sheet of plywood or OSB. That standard cut is covered without needing an outfeed table or a second person to guide the material.
The size is a big deal here.
This is a compact saw, so it stores easily under a bench or in a tight corner. When you need to move it, the weight and shape make it manageable. It won’t become the one tool you dread loading and unloading. The metal roll cage base adds to the durabilty. It protects the saw if it takes a bump on a jobsite, and it keeps everything stable while you are cutting.
Setting up the fence is where this saw saves you time.
The rack and pinion telescoping rails let you adjust the fence smoothly and precisely. You slide it, it stays square, and you lock it. No tapping or measuring to get it parallel. That system is fast and accurate for repetative cuts. The fence itself stores on the saw when your done, along with the guard, wrenches, and miter gauge. Everything has a place, so you are less likely to leave a part behind.
The guarding system is called Site-Pro. It allows for tool-free adjustments.
Mini Table Saw for Crafts[Dual 795 Motors & Switches] Max 200W/12,000RPM/26mm Adjustable Height Table Saw with Accessories.Gift for Men and Women's Creating Handmade Gifts,Exploring Hobbies,Models
![Mini Table Saw for Crafts[Dual 795 Motors & Switches] Max 200W/12,000RPM/26mm Adjustable Height Table Saw with Accessories.Gift for Men and Women's Creating Handmade Gifts,Exploring Hobbies,Models](https://m.media-amazon.com/images/I/413iBvhx-jL._SL500_.jpg)
The Zericuf Mini Table Saw for Crafts is a compact tool built for detailed work. It comes with two 795 motors and two separate switches. This is the first design of its kind in a mini saw. Each switch controls one motor only. This means you cannot run the cutting and polishing functions at the same time. It keeps you safer and stops the power adapter from overloading. The motors also last longer because they share the work.
The whole unit runs more stable and quieter as a result.
The saw uses upgraded dual 795 motors that put out a max of 200W. A single motor can spin up to 12,000 RPM. The 7-level adjustable power adapter lets you match the speed to your material. Cutting and polishing is much faster compared to older models. The blade is a larger 80-85mm size. You can adjust the cutting height from 0 to 26mm, which lets you cut materials up to 26mm thick. The old model only cut up to 16mm.
The sanding disc is now 3.15 inches wide, so large sanding jobs go quicker. The worktable is also wider at 12cm, up from 9cm, giving you more room to work with materials up to 12cm long.
Changing the blade is simple. You only remove two screws through a small window on the side. This saves about 80% of the time compared to older mini saws. Inside, there is a dedicated blade compartment that keeps dust away from the motors. An external dust port lets you attach a vacuum for cleaner work.
MIMYTH Mini Table Saw for Crafts, Multifunctional Portable Table Saws Adjustable Cutting Angle,Speed,SawDepth; Small Table Saw for Cutting, Grinding, Sanding; Tablesaw (Forged Silver-Dual Motor)
The MIMYTH Mini Table Saw for Crafts, the Forged Silver-Dual Motor model, is a compact workshop tool built for precision work. It handles cutting, grinding, sanding, and even engraving, making it a solid choice for hobbyists who work with small materials.
You get two 795 pure copper motors. Each one runs independently, so there is no interference between the saw, the drill chuck, or the sanding disc.
This setup gives you good power with low noise, and it helps keep the tool safe during use. The saw table has a laser-etched, wear-resistant scale for clear markings, plus a transparent guard to block debris. Rubber feet absorb vibration and keep the unit stable.
This mini saw is designed for a range of materials. It cuts PCB boards, balsa wood, thin wood, plastic sheets, and even aluminum and copper pipes.
The included 2.5-inch blades are task-specific: a PCB blade for circuit boards and plastics, a high-speed steel blade for thin wood and acrylic, an alloy blade for metal tubes, and a resin blade for balsa wood. You can adjust the blade height from 0 to 0.59 inches, and the cutting angle goes from 0 to 90 degrees for straight or bevel cuts.
Table Saw 10 Inch, 15 Amp 5000RPM Powerful Tablesaw With Stand & Protective Cover, 36 X 25 Inch Tabletop Saw 90° Cross Cut & 0-45° Bevel Cut, Adjustable Depth, for Woodworking, Metal, Plastic
The ‘Table Saw 10 Inch, 15 Amp 5000RPM Powerful Tablesaw With Stand & Protective Cover’ is a versatile tool designed for cutting wood, metal, and plastic. It comes with a stand and a protective cover right out of the box, so you can set it up quickly. The tabletop measures 36 by 25 inches, giving you a stable and spacious work surface.
This saw gives you adjustable cutting options. You can make 90° cross cuts for straight, accurate work.
The maximum cutting depth for a cross cut is 74mm. For angled work, you can set the blade from 0 to 45 degrees for bevel cuts, with a max depth of 52mm. This lets you handle different joints and shapes without needing a second tool. The depth adjustment is simple to use, so you can dial in exactly what you need.
The design is portable and practical. The back of the saw has a port for connecting a dust collector. This helps keep your workspace cleaner, so you spend less time sweeping up.
There is also storage on both sides for wrenches and push rods. Everything you need is right where you can grab it, which makes the work flow smoother.
Safety is built in. The transparent blade guard gives you a clear view of the cut while protecting your hands from accidental contact. It also comes with a push stick to keep your fingers away from the blade during operation.
Evolution R8MTS 8-1/4" Convertible Miter/Table Saw – Multi-Function Saw – 0-45° Bevel & +/- 45° Miter – Multi-Material Cutting: Wood, Plastic, Metal – Compact, Powerful 12A Motor – TCT Blade Incl
The Evolution R8MTS 8-1/4″ Convertible Miter/Table Saw is a two-in-one tool that gives you both a compound miter saw and a table saw in one compact package. If you are working in a tight garage or a small home workshop, this design saves you serious space. You can switch between miter and table saw modes using simple locking pins, so the changeover takes just seconds.
One of the biggest perks here is multi-material cutting.
A single TCT blade handles wood, plastic, mild steel, aluminum, and composites. No need to swap blades when moving from hardwood to steel or even reclaimed lumber with embedded nails. The saw delivers a fine finish in wood and a burr-free cut in metal. This makes it a strong choice for DIY projects, renos, or general job site work.
Precision is built in. You get a 0 to 45 degree bevel and a miter range from 45 degrees left to 45 degrees right.
Pre-set stops help you lock in common angles quickly. The cast aluminum table top stays flat for consistent cuts, and the dual-locking rip fence keeps your material steady. The thin-kerf blade reduces waste and gives you a clean edge every time.
Safety isnt overlooked. The blade guard stays covered until it contacts the material, keeping the blade hidden in both miter and table saw modes. A riving knife and a dedicated table saw blade guard help reduce kickback.
Metal Table Saw Buying Guide
Finding a reliable metal table saw requires assessing fence accuracy and blade capacity for your projects. You need a machine that cuts cleanly through steel or aluminum without bogging down. The wrong saw leads to wasted material and frustration. So where do you start? Focus on the factors that actually matter for metalwork, not just woodworking specs.
Motor Power and Torque
Metal cutting demands torque, not just raw speed. A motor that struggles under load will overheat and stall. Look for saws with at least 15 amps or 3 horsepower. Brushless motors run cooler and last longer. Ask yourself: does the saw maintain blade speed when you push through thick steel? If not, you’ll spend more time fighting the tool than finishing your cut.
Fence System Stiffness
A flimsy fence ruins accuracy. On a metal table saw, the fence must lock square and stay put under vibration. Test it by applying pressure—if it shifts, walk away. T-square fences offer better stability than tube-style designs. You want repeatable cuts without remeasuring every time.
Blade Size and Arbor Type
Most metal cutting jobs need a 10-inch blade, but 12-inch models handle thicker stock. Check the arbor size: 5/8-inch is standard, but some saws use 1-inch arbors for heavy-duty blades. Also confirm the arbor lock works smoothly—swapping blades between ferrous and non-ferrous metals is common, and a stuck lock slows you down.
Dust Collection Ports
Metal chips are sharp and messy. A saw with a 4-inch dust port connects to a shop vac or dust collector. Without it, chips pile up fast and can jam the blade guard. Look for ports placed near the blade path, not off to the side. Your workshop floor will thank you.
Table Surface Durability
Cast iron tables resist warping and dampen vibration better than stamped steel. They also let workpieces slide smoothly. But cast iron rusts if you cut wet materials. Aluminum tables are lighter and rust-proof, but they dent easier. Weigh your workspace needs—do you move the saw often or leave it stationary?
Pick a saw that matches your metal projects, not just your budget. A solid fence, strong motor, and good dust control make the difference between a tool you love and one you regret.
Frequently Asked Questions About Metal Table Saw
What is a metal table saw?
A metal table saw is a powerful tool. It cuts metal materials like steel, aluminum, and brass. Unlike wood saws, it uses special blades and runs at slower speeds. This prevents overheating and keeps your cuts clean.
Can I use a regular table saw for metal?
You can, but it’s not a good idea. Regular table saws spin too fast. This can cause dangerous sparks or mess up teh blade. You’re better off with a saw made for metal. It’s safer and works better.
What features should I look for?
Look for a strong motor. It needs power to cut through metal. A variable speed control is handy. It lets you adjust the speed for different metals. Also, check for a good fence system. This helps you make straight cuts every time.
Is a metal table saw safe?
Yes, when you use it right. Always wear safety glasses and gloves. Keep your hands away from the blade. Use a push stick for small pieces. And never force the cut. Let the saw do the work.
What kind of blade do I need?
You need a blade designed for metal. Look for carbide-tipped teeth. They stay sharp longer. The blade should have fewer teeth than a wood blade. This reduces friction and heat. Some blades also have a special coating to prevent sticking.
How do I maintain my metal table saw?
Keep it clean. Metal shavings can build up and cause problems. Lubricate moving parts regularly. Check the blade for wear. Replace it if it’s dull. Also, tighten bolts and adjust the fence. This keeps your saw accurate.
Can I cut different types of metal?
Yes, you can cut aluminum, steel, and brass. Just adjust the speed for each metal. Softer metals like aluminum need slower speeds. Harder metals like steel may need faster speeds. Always check your saw’s manual for guidance.
What is the price range?
Prices vary. Basic models start around $200. More advanced saws can cost $500 or more. You pay for power, durability, and features. Think about your needs and budget. A good saw is an investment.
Do I need special training?
Not exactly. But practice helps. Watch some videos or read the manual. Start with simple cuts on scrap metal. This builds confidence. Remember, safety comes first. Take your time and learn as you go.
Last Thoughts Before You Buy
You now know what to look for in a heavy-duty saw. Stick to a motor with real torque. A sturdy fence system makes a big difference. So does blade guard quality. Think about your workspace too. These machines are heavy and loud. Make sure you have room to move and store it safely. A good dust port helps keep teh air clean. And always double check the arbor size for your blades. Don’t rush the choice. The right saw will last you many years of reliable service.
Before you click buy, remember that a metal table saw is a serious investment. It needs proper care and attention. Read the manual. Learn the safety features. Use the right blade for each job. And always wear proper protection. With the right setup and a bit of patience, you’ll cut through steel and aluminum with clean, accurate results. Your projects will come together faster and with less hassle. That’s the real value of a well-chosen saw.