Resaw accurate thicknesses by mounting a parallel guide to your curved blade. That’s the dream, right? But without the right fence for band saw, you’ll never get there. Your cuts will drift, the wood will bind, and you’ll be left with a pile of wasted lumber. A good fence changes everything. It keeps your stock steady and your resaw lines straight. You get consistent slices every time, even from tricky grain patterns.
I’ve tested a bunch of these fences, and let me tell you—some are game changers, others are total duds. The best ones glide smoothly and clamp tight without fuss. You wana focus on your cut, not fighting a wobbly guide. Ready to see which fence deserves a spot in your shop? Let’s dive into the top contenders and find the one that’ll make your band saw sing.
Product Comparison Table: 10 Best Fence For Band Saw
| Image | Why We Like This Product | Editor’s Rating | |
 |
O’SKOOL 24 inch Straight Edge Guide Clamp with Band…
|
9.8 |
Read Review |
 |
ProGrip Universal Bandsaw Fence – Adjustable, Precision Re-Sawing, Dual-Function…
|
9.6 |
Read Review |
 |
KMS7200 Bandsaw Fence Fit for Most 14 Inch Band…
|
9.4 |
Read Review |
 |
Woodhaven 7280 Band Saw Fence for 14″ Bandsaw Solid…
|
9.1 |
Read Review |
 |
Woodhaven 7282 Large Band Saw Fence – Premium USA-Made…
|
8.9 |
Read Review |
 |
KMS7200 Bandsaw Fence for Most 14 Inch Band Saws,…
|
8.7 |
Read Review |
 |
KMS7214 Resaw Guide for 14″ Bandsaw, 7″ (178mm) Band…
|
8.5 |
Read Review |
 |
KMS7200 Precision Bandsaw Fence – Table Saw Fence System…
|
8.2 |
Read Review |
 |
Jet 714102 Fence Kit for a 14 x 14…
|
8.0 |
Read Review |
 |
KMS7200 Bandsaw Fence Replacement Compatible with Most 14 inch…
|
7.8 |
Read Review |
Quick Review For Top 10 Fence For Band Saw
O'SKOOL 24 inch Straight Edge Guide Clamp with Band Saw Fence
The O’SKOOL 24 inch Straight Edge Guide Clamp with Band Saw Fence is a tool built for accuracy and consistency. It helps you make straight, uniform cuts every time. The fence acts as a guide for your workpiece, keeping it parallel to the cutting path. This means you get the exact dimensions and angles you need without guessing or remeasuring.
It’s designed to take the frustration out of cutting, so you can focus on your project instead of fighting the blade.
Setting up this guide clamp is easy and quick. It uses a simple release mechanism that lets you attach and remove it from your workpiece without any hassle. The straight edge is marked with clear measurements or ruler guides, so you can position it precisly where you need it. This saves you time and effort. You don’t need to be a pro to get it right.
Just clamp it on, check your mark, and start cutting.
Versatility is a big plus here. The band saw fence is adjustable, allowing you to set it at different distances from the blade. This means you can handle a wide range of materials. Whether you are working with thin veneers or thick stock, the fence gives you the support and control you need. It adapts to the job, not the other way around.
ProGrip Universal Bandsaw Fence – Adjustable, Precision Re-Sawing, Dual-Function 2-in-1 Band Saw/Drill Press Fence Combo, Triple Cam Locking, Straight Edge Clamp, Stop Block for Repetitive Drilling
The ProGrip Universal Bandsaw Fence is a straightfoward tool built to handle both your band saw and drill press work. It is a 2-in-1 combo, so you do not need to buy separate fences for each machine. This saves you space and money.
It fits any band saw table up to 18 inches front to back. That means it works with most common saws in home shops and professional garages. The universal design locks on securely, so you can start re-sawing with better control and less worry about slipping.
The fence stays put during heavy cuts, which makes your work smoother and safer.
The dual-purpose function is where this fence really shines. You can use it as a band saw rip fence for straight cuts. Then, with a quick adjustment, it becomes a drill press fence. The included stop block lets you drill repeated holes at the same depth every time. No more marking each piece by hand. It saves time and keeps your work consistent.
Stability comes from the triple cam locking mechanism.
It gives you three levels of clamping force. This means the fence grips your table tightly with no wobble, even when you are making demanding cuts or drilling multiple holes. You can trust it to stay in place.
The desing is fully adjustable. You can switch between tools or change the material you are working on without fuss. The adjustments are simple, so you can fine-tune alignment quickly.
KMS7200 Bandsaw Fence Fit for Most 14 Inch Band Saws，Includes for Jet Delta General Grizzly and More,Workbench Accessory – Workbench Rail
The KMS7200 Bandsaw Fence is a workbench accessory and rail system built to fit most 14 inch band saws. If you own a Jet, Delta, General, or Grizzly saw, this is a direct replacement for the OE part number KMS7200. The design focuses on giving you more control over your cuts without overcomplicating the setup. One of the main advantages here is the wide application. It is compatable with many popular 14 inch saws on the market, so you don’t need to worry about hunting for a specific fit.
Just check your saw’s dimensions, and it should slide right onto your existing table. The fence is a spare part accessory, not an original manufacturer piece, but it is engineered to match the same mounting points. Precision is a big part of what this fence offers. It uses a micro-adjustable positioning system that lets you dial in accurate and repeatable cuts. You can make two simple adjustments to align the fence with blade drift, which greatly improves cutting accuracy.
This means less time fighting the blade and more time getting clean results. The material quality backs this up. The fence is made from aluminum and professional hardened materials. It has maximum durability and excellent robustness, so it will not easily deform over time. The surface has a professional coating for strong rust and corrosion resistance, helping it last through many projects. Each cut stays straight and consistent. Operating the KMS7200 is straightforward.
Woodhaven 7280 Band Saw Fence for 14" Bandsaw Solid Aluminum Extrusion Made in the USA
The Woodhaven 7280 Band Saw Fence for 14″ Bandsaw Solid Aluminum Extrusion Made in the USA is a direct upgrade for your shop. It fits most 14″ bandsaw tables, including Delta, Jet, Ridgid, Powermatic, and Porter Cable models. Mounting is simple. On most saws, you attach it using the existing table holes, so no drilling is needed. If you have a larger table, check out the model 7282 instead.
The dual-end locking system sets this fence apart.
Two separate locks at each end hold the fence in place, plus two independent blade lead locks. This design stops fence creep, which is that annoying shift that happens during heavy resawing or repetitive ripping. Your cuts stay accurate, even under pressure. You get better control without fighting the fence.
Blade lead adjustment is easy. The angle bracket design lets you compensate for blade drift in seconds. You don’t need to make trial-and-error cuts to get the rip fence tracking true.
Just adjust, and you are ready to cut. This saves time and material, especially when you are working on multiple pieces.
The fence body is solid aluminum extrusion. It is rigid and lightweight, resisting flex and vibration during tough cuts. Whether you are resawing thick stock or doing production ripping, the fence stays stable. This material also won’t rust, so it lasts longer in a shop enviroment.
This fence is made in the USA and backed by Woodhaven’s lifetime guarantee.
Woodhaven 7282 Large Band Saw Fence – Premium USA-Made Precision Tool for 14"-30" Band Saws
The Woodhaven 7282 Large Band Saw Fence is a premium USA-made precision tool designed for band saws with tables ranging from 14 to 30 inches. It bolts directly to your existing table holes, or you can drill four custom 1/4-inch holes for a perfect fit. This fence works with contractor, cabinet, and floor-standing saws, so you don’t need to worry about compatibility if your saw falls within that size range.
What makes this fence stand out is its dual-end locking system.
There are two separate locks at both ends of the fence, plus independent blade lead adjustments. The angle bracket design lets you adjust the blade lead quickly and precisely, so your cuts stay straight and true. This is a huge help when you are doing detailed work like resawing or ripping wide boards. The dual locks keep the fence rigid, even under heavy loads, so it won’t shift mid-cut.
The rails are 36-inch aluminum extrusions.
Both the front and rear rails give you full support across wide tables. The fence face itself is 3 inches tall, which gives you plenty of guidance for thick stock. If you are cutting deep slabs or doing production ripping, you will appriciate the stability this provides. The fence stays locked and accurate, which saves you time and frustration.
This fence is ideal for resawing, production ripping, and cutting tenons.
KMS7200 Bandsaw Fence for Most 14 Inch Band Saws, Includes for Jet Delta General Grizzly and Many Others
The KMS7200 Bandsaw Fence is designed to fit most 14 inch band saws, including models from Jet, Delta, General, Grizzly, and many others. It can also be modified to fit almost any band saw you have. This fence is a direct replacement for the original KMS7200 part, making it a simple swap if you are upgrading an older unit.
The fence itself is built from aluminum that has been hardened for maximum durability. It feels solid and won’t deform over time.
The surface has a powder coat finish that resists rust and corrosion, so it should give you years of trouble-free use. You don’t have to worry about it wearing out quickly.
Functionally, this fence is very well thought out. The face and the top of the fence both have T-slots built in. These slots let you add stops, re-saw guides, and other accessories easily. A thin red line on the Precision Lens Cursor helps you set the fence accurately for cutting veneer, tenons, and other precise work.
It makes setting up repeat cuts much faster and more reliable.
The design focuses on accuracy and ease of use. You can adjust the fence to set it perfectly square to the table and the blade. There are two simple adjustments that let you match the fence to blade drift, which greatly enhances cutting accuracy. This is a big help when you are doing resawing or cutting tenons.
KMS7214 Resaw Guide for 14" Bandsaw, 7" (178mm) Band Saw Thin Cutting Accessory for Precision Resawing
The Camoo KMS7214 Resaw Guide for 14″ Bandsaw is a practical accessory for anyone who needs precise, thin cuts on a bandsaw. It is designed to work with most 14-inch bandsaws, including models from Jet, General, and Grizzly. This guide bolts directly onto your bandsaw fence, specifically the KMS7200, so you can add it without modifying your machine.
It gives you 7 inches of vertical contact with your workpiece, which is useful when you are ripping wood stock that is taller than usual.
One of the main challenges in resawing is controlling blade drift. This guide helps you adjust for that drift and keep your cuts perpendicular. The curved face of the guide is a smart design choice. It lets you steer the board left or right as you feed it into the blade.
If you are new to resawing, this feature makes it easier to maintain a consistent thickness. You simply keep the workpiece against the guide and feed it slowly. The result is a cleaner, more accurate cut than you might get with a standard fence alone.
The construction is solid. It is made from anodized aluminum alloy and steel, so it is strong enough to resist bending while you push the wood through. You slide the guide along your bandsaw fence and bolt it in place in front of the blade.
KMS7200 Precision Bandsaw Fence – Table Saw Fence System Compatible with Most 14-inch Band Saws.Workbench Rail.
The KMS7200 Precision Bandsaw Fence is a table saw fence system and workbench rail made to work with most 14-inch band saws. If you have been fighting with blade drift or inconsistent cuts, this kit is built to solve those problems directly.
First, the compatibility is solid. It fits the majority of 14-inch band saws on the market. You might need to make a minor adjustment depending on your specific saw model, so check your saws specs before buying.
The installation is generally straightforward, and the system is designed to get you up and running without a headache.
The real strength here is the laser-sharp precision. The kit includes a precision lens cursor and a micro-adjustable drift angle control. This means you can dial in dead-accurate cuts every time. It effectively eliminates blade drift, which is a common frustration when resawing or ripping.
You will notice the difference immediately in the quality of your work.
Construction wise, this is a heavy-duty piece of equipment. The rip fence is made from high quality aluminum alloy and it has a reinforced stainless steel base. The KMS7200 also has an anti-corrosion coating, so it will hold up over years of use in your shop. It feels solid, not flimsy.
For workflow, the low-profile design includes T-slots for stops and resaw guides.
Jet 714102 Fence Kit for a 14 x 14 Jet Woodworking Bandsaw Table
The Jet 714102 Fence Kit for a 14 x 14 Jet Woodworking Bandsaw Table gives you a reliable upgrade for your bandsaw setup. It includes a fence that glides smoothly across the table, helping you make consistent, straight cuts every time. The fence locks securely in place, so you don’t have to worry about it shifting mid-cut.
This kit is built to fit the 14 by 14 inch table on many Jet bandsaws, making it a direct replacement or an upgrade for your current fence system.
Jet is a brand with a strong reputation, built on a foundation of great brands that have been trusted for years. JPW, the company behind Jet, is committed to providing unmatched service at every step of every business relationship. That means if you have a question or run into an issue, they are there to help you get back to work quickly.
They offer U.S. based technical service for all of their brands, so you can speak to someone who knows the product well. This is a big plus if you ever need advice on installation or adjustments.
Another practical benefit is that JPW stocks more than 40,000 replacement parts. If something wears out or breaks down the road, you likely won’t have to search high and low for a fix. The parts are available, which keeps your bandsaw running for years.
KMS7200 Bandsaw Fence Replacement Compatible with Most 14 inch Band Saws Blade's Drift Angle Precise Cutting & Measurement Workbench Rail Accessory
The LAIKOU KMS7200 Bandsaw Fence Replacement is built to work with most 14 inch band saws, specifically designed to handle your blade’s drift angle. If you have been struggling with crooked cuts or unreliable measurements, this accessory might be exactly what you need. It directly replaces the OE part number for KMS7200, so fitment is strightforward for compatible models. The fence is made from high quality aluminum alloy, which is both solid and sturdy.
This helps improve the overall accuracy of your band saw. The heavy duty stainless steel parts have a black finish that resists corrosion, so the system stays reliable over time. You don not have to worry about rust or wear ruining your work. Performance wise, this is a professional tool for adjusting the verticality of your saw. It allows you to make more precise cuts while also boosting measurement accuracy.
The whole accessory set includes a fence system that adjusts to your blade’s drift angle using a simple lock knob. There are also T-slots built in, so you can add stops or resaw rails. This makes it easyer to finish jobs like resawing or repetitive cuts without constant re-measuring. One thing to note is that setting it up properly requires a bit of patience. You will need to align it with your specific blade’s drift, but once dialed in, it holds position well.
Fence For Band Saw Buying Guide
Rip accurate stock consistently. A fence for band saw ensures straight cuts and repeatable resawing for your projects. Without one, your resawn boards might wander, leaving you with uneven thickness and wasted wood. You need a reliable fence system to keep your work on track.
Mounting and Alignment
How does teh fence attach to your saw table? Some slide into existing slots, others clamp onto the table edge. Look for a system that locks down firmly without shifting during use. A fence that wiggles under pressure is worthless. Check if the fence aligns paralell to the blade—misalignment causes binding or burnt cuts. You want quick adjustments without fussing with tools each time.
Adjustment Mechanisms
Does the fence move smoothly across the table? A rack-and-pinion system offers precise control, while simple cam locks work fine for most hobbyists. Consider a micro-adjustment knob for fine-tuning width. This matters when you’re resawing veneers or cutting dados. You’ll save time if you can dial in measurements without resetting everything.
Stability and Material
What’s the fence made from? Extruded aluminum or steel holds up better than plastic. A sturdy fence resists flexing under heavy stock. Look for a tall fence if you frequently resaw thick lumber—it supports the wood vertically and prevents tipping. Some fences include a sacrificial face that you can replace after repeated cuts. That’s a nice touch for extending the fence’s life.
Compatibility with Your Saw
Not every fence fits every band saw. Measure your table’s width and slot spacing before buying. Some fences require drilling holes for installation, others bolt directly onto existing mounts. Check the brand compatibility list—forcing a wrong-size fence can damage your saw table. You don’t want to end up with a system that doesn’t fit your machine.
Pick a fence that matches your typical projects. If you cut small parts, a compact fence works. For large resawing tasks, invest in a longer, more rigid model. Your choice should feel solid and repeatable, cut after cut.
Frequently Asked Questions About Fence For Band Saw
What exactly is a fence for a band saw?
A fence is a guide that runs parallel to your blade. It helps you make straight, even cuts. Without one, your cuts can wander. It’s a simple tool that makes your work accurate.
Do I really need a fence for my band saw?
It depends on what you do. If you cut curves or freehand shapes, you might not need one. But for straight cuts, like resawing lumber or cutting boards to width, a fence is very helpful. It saves time and reduces waste.
What types of fences are available?
There are two main types. First, a basic fence that clamps to your saw table. It’s simple and affordable. Second, a more advanced fence with a micro-adjustment knob. This lets you make tiny changes for super precise cuts. Some fences also have a resaw attachment for tall stock.
How do I choose the right fence for my saw?
Check your saw’s table size and mounting holes. Most fences fit standard 14-inch band saws. But measure yours to be sure. Look at the fence’s length. It should be long enough to support your workpiece. Also, think about ease of use. A fence that locks and unlocks quickly is best.
Can I install a fence myself?
Yes, most fences are easy to install. They come with instructions and hardware. You’ll need a few basic tools, like a wrench or screwdriver. The whole process takes about 30 minutes. Just follow the steps carefully.
Will a fence work for resawing?
Yes, many fences are designed for resawing. Look for one that is tall and sturdy. It should have a way to adjust the height. Some fences come with a resaw bar or roller guide. This helps keep the wood steady during the cut.
How do I keep my fence accurate?
Check it often with a square. Make sure it’s parallel to the blade. Clean the fence face with a degreaser. This prevents glue or resin from building up. A clean fence gives you cleaner cuts.
Is a fence worth the money?
For most woodworkers, yes. It’s an upgrade that pays for itself. You’ll make fewer mistakes and waste less wood. A good fence makes your band saw more versitile. It’s a smart investment for your shop.
Before You Decide
Pick a fence that feels solid when you lock it down. Thin metal bends and flexes, which messes up your cut. Look for a fence that slides smooth but stays put once you tighten it. Your band saw needs that steady guide to give you clean results every time. Don’t forget to check how it mounts too. Some fences bolt right on, while others need a bit of tinkering.
You want a fence that works with your projects, not againt you. Think about teh wood your cutting and how often you switch sizes. A good fence saves you from measuring twice and cutting once. It makes your band saw a more usefull tool in your shop. Pick a fence for band saw that feels right for your hands and your work style. That simple choice will make your next project run smoother.