Holds workpieces securely during cutting or sanding without leaving sticky residue. That’s the holy grail of double sided tape for woodworking, right? You’ve been there before—fighting with clamps that get in the way, or worse, peeling off tape that leaves a gummy mess behind. It’s frustrating when your project gets ruined by a simple cleanup step.
But here’s the thing, the right tape changes everything. It grips your wood like a vise, so you can focus on your cuts or sanding without worrying about slippage. You get clean results every time, and it peels off easy when you’re done. No fuss, no residue—just your workpiece ready for the next step. Isn’t that what you’ve been looking for?
Product Comparison Table: 10 Best Double Sided Tape For Woodworking
| Image | Why We Like This Product | Editor’s Rating | |
 |
HIPPIE CRAFTER 3 Pack Double Sided Tape for Woodworking,…
|
9.8 |
Read Review |
 |
HIPPIE CRAFTER Double Sided Tape for Woodworking, 2 Inch…
|
9.6 |
Read Review |
 |
SICCOMA Double Sided Woodworking Tape Double Sticky Tape for…
|
9.4 |
Read Review |
 |
XFasten Double Sided Woodworking Tape 1 Inch x 180…
|
9.1 |
Read Review |
 |
XFasten Double Sided Woodworking Tape 1/2″ x 36 Yards…
|
8.9 |
Read Review |
 |
SWRT Double Sided Woodworking Tape for Woodworking Router Templates…
|
8.7 |
Read Review |
 |
ZARBRE Double Sided Woodworking Tape, 1 & 2 Inch…
|
8.5 |
Read Review |
 |
XFasten Double Sided Woodworking Tape 1 inch x 36…
|
8.2 |
Read Review |
 |
Juehuodaji 2 Pack Double Sided Woodworking Tape, 1 Inch…
|
8.0 |
Read Review |
 |
SPJRGRS 1 Pack 0.6 Inch x 108 Ft Double…
|
7.8 |
Read Review |
Quick Review For Top 10 Double Sided Tape For Woodworking
HIPPIE CRAFTER 3 Pack Double Sided Tape for Woodworking, 1 Inch Wide Heavy Duty Woodworking Tape for CNC Machines and Routing Templates, 60 Feet Each,180ft Total
The Hippie Crafter 3 Pack Double Sided Tape for Woodworking is a heavy duty, 1 inch wide tape made specifically for holding your workpieces and templates in place. It comes with three rolls, each 60 feet long, giving you a total of 180 feet to work with. That is a lot of tape for your shop. This tape uses a silicone-based adhesive that offers superior adhesion.
What makes it interesting is that it holds pieces securely—even on a CNC machine or router—but still lets you remove them without breaking the wood. You do not have to worry about chipping the surface when you pull it apart. It works with all wood types, from soft pine to hard oak, and it is suitable for hand woodworking, mounting templates, or routing projects. The adhesive is industrial grade, but it is not permanent.
The double sided tape has a specific thickness and tackiness that makes it easy to apply and remove. It leaves no sticky residue behind when you peel it off. That is a big deal if you are working on a fine furniture piece or a delicate craft project. You can use it for making boxes, shelves, or any other wood art. One thing that stands out is how easy it is to tear. You do not need scissors to cut it; just rip it by hand. That saves time when you are in the middle of a setup.
HIPPIE CRAFTER Double Sided Tape for Woodworking, 2 Inch Wide Heavy Duty Woodworking Tape for CNC Machines and Routing Templates, Removable & Strong, 90 Feet Long.
The HIPPIE CRAFTER Double Sided Tape for Woodworking is a 2 inch wide, 90 foot long roll of heavy duty tape designed specifically for CNC machines and routing templates. If you work with wood, this tape is made to hold your pieces securely without causing headaches later. The adhesion on this tape is excellent. It uses a silicone-based adhesive that grips your materials tightly. You can stick down a template or a workpiece, run your CNC machine, and trust that nothing will shift.
But here is the key part: it is removable. When you are done, you can pull the pieces apart without breaking them. This is huge for delicate woodworking projects where you don’t want any damage. This tape works with all wood types. Whether you are using pine, oak, walnut, or maple, the double sided tape holds firm. It is also suitable for hand woodworking, mounting acrylic templates, and general routing.
The 2 inch width gives you plenty of coverage, and with 90 feet on a roll, you have a lot of tape to work with. It is industrial grade, so it is tough enough for professional use but also easy enough for a home woodcraft hobbyist. The thickness and tackiness are balanced just right. You get a strong hold, but you can still apply and remove it without chipping the wood surface. Removal is straightforward. The tape is designed to be easy tear, so you can cut it to length without needing scissors.
SICCOMA Double Sided Woodworking Tape Double Sticky Tape for Woodworking Router Templates and CNC Projects 1 inch by 82 feet Heavy Duty Double Adhesive Tape Removable
The SICCOMA Double Sided Woodworking Tape is a heavy duty double adhesive tape designed to keep your projects steady without the mess. It comes in a 1 inch by 82 feet roll, with a yellow paper backing that makes it easy to handle. This tape is built for strong adhesion, so it holds tight while you work, but it also comes off clean when you’re done. No sticky residue left behind, and it won’t lift or chip the surface of your wood.
That means less cleanup and more time focusing on your build.
This tape works well for both hand woodworking and CNC machine projects. If you’re routing templates, bonding wood pieces, or mounting wood for slicing, it gives you stable hold. It can handle a wide range of working temperatures and resists heat, so it stays reliable even during longer sessions. The material is high-quality PVC, and the adhesive is applied on both sides for a secure grip.
Peeling it off and applying it is simple, and it’s removable without any fuss.
Beyond woodworking, this double sided tape has plenty of other uses. It’s good for bonding, fixing, pasting, and mounting on many surfaces. You can use it for DIY art and crafts, sewing projects, paper crafting, wall decorations, festival decor, model making, gift wrapping, and even rug or carpet fixing. It also works for small object bonding and cat training.
XFasten Double Sided Woodworking Tape 1 Inch x 180 (3-Pack) – Double Face Woodworker Turner's Tape for Wood Template, Edge Banding, Routing, Anchoring, Strong Adhesion but Removable and Residue Free
The XFasten Double Sided Woodworking Tape 1 Inch x 180 (3-Pack) is a double face woodworker’s turner’s tape built for templates, edge banding, routing, and anchoring. It offers strong adhesion but stays removable and residue free.
This tape is easy to work with. It works great for edge routing, banding, splicing, anchoring, and pattern cutting. It won’t leave any sticky mess or chip off your wood surfaces.
At just 0.21mm thick, it has a slim profile that creates zero gaps between wood templates. Despite that thinness, it is heavy-duty and industrial-grade. It can withstand high-speed CNC machines running up to 4500rpm. That is a lot of speed for such a thin tape.
The adhesive is strong but surface-safe. It stays firm during your work but peels off cleanly when you are done. There is no sticky residue left behind, and it will not damage delicate wood surfaces.
The cloth backing prevents the tape from curling or tearing unnecesarily. This makes it easy to manage, apply, and remove, which cuts down on preparation time for each template. With three rolls, you get a total of 180 feet of tape.
XFasten made this tape by working with professional woodworkers across the United States. They designed it for fast and convenient operation.
XFasten Double Sided Woodworking Tape 1/2" x 36 Yards (4-Pack) – Double Face Woodworker Turner's Tape for Wood Template, Edge Banding, Routing, Anchoring | Strong Adhesion but Removable & Residue Free
The XFasten Double Sided Woodworking Tape 1/2″ x 36 Yards (4-Pack) is a double face woodworker turner’s tape built for template work, edge banding, routing, and anchoring. This tape is designed to give you strong adhesion that holds firm during high-speed CNC machine routing, but it stays removable and residue free when you need it off.
You get a 4-pack, each roll measuring 1/2 inch wide and 36 yards long. That is a lot of tape for repeated setups and large projects.
The thickness is just right. It is not too thick, so you can peel it off without damage or tearing. It also does not curl up on you, which makes it easy to handle and place.
The tape leaves no sticky mess behind. It comes off clean without ripping or chipping the fibers of wood, plywood, veneer, wood laminates, or MDF. That means your surface finish stays intact.
You do not have to spend time scraping off residue or sanding down damaged spots.
XFasten worked with professional woodworkers on Instagram to nail down the specs. They asked about thickness, tackiness, and width. The result is a tape that meets the real demands of CNC and hand woodworking. It is made by woodworkers for woodworkers, so it is designed for the way you actually work.
The cloth backing is a key feature. It resists curling and unneccesary tearing.
SWRT Double Sided Woodworking Tape for Woodworking Router Templates and CNC Projects, Removable Adhesive for Holding Wood Templates, Routing, and Anchoring, No Residue, 1 & 2 Inch x 33 FT, 2 Rolls
The SWRT Double Sided Woodworking Tape for Woodworking Router Templates and CNC Projects is a practical tool for anyone who works with wood. It comes with two rolls—one inch and two inches wide—giving you 33 feet of tape per roll. That is a total of 66 feet to work with. The tape is designed for temporary holding, so you can attach templates, jigs, or panels without worrying about permanent damage.
This is an industrial grade double sided tape.
It sticks strongly while you are routing or cutting, but it peels off cleanly when you are done. No sticky residue is left behind, and the wood surface stays smooth. You won’t see any wood fiber tears or chips after removal. That makes it great for CNC projects or edge banding where precision matters.
The cloth backing is a nice touch. It resists curling, so the tape lays flat and is easier to handle. This saves you time during setup because you are not fighting with the tape.
The release liner also comes off easily before you place it on your workpiece. You can position everything exactly where you need it without frustration.
You have two width options for different tasks. Use the one-inch tape for smaller jigs or detail work where you need a steady hold. The two-inch tape is better for larger templates or panel alignment. It gives you more surface area for stronger adhesion.
ZARBRE Double Sided Woodworking Tape, 1 & 2 Inch x 33 FT, 2 Rolls Residue-Free, Removable Strong Double Sided Tape for Woodworking, Double Sided Masking Tape for Wood Template, Edge Banding, Anchoring
The ZARBRE Double Sided Woodworking Tape comes in two rolls, one inch and two inches wide, each thirty-three feet long. This tape is made for holding things in place while you work, and it does that job well. You get two sizes right away, so you can pick the width that fits your project without having to buy extra rolls.
The adhesion is strong.
It sticks tight to wood, metal, and other surfaces, keeping your workpiece or template from sliding around during cutting, polishing, or CNC machining. Even when it gets hot or humid, it stays put. No warping, no shifting, no peeling off too soon. That means your cuts stay accurate and your work stays stable. You can trust it to hold firm through the whole job.
It is not just for one type of wood. Use it on any wood kind for bonding, fixing, or installing.
It works in a lot of different situations. You can use it for woodworking, like holding templates or edge banding, but also for DIY crafts, model building, sewing, wall decorations, holiday setups, keeping rugs from sliding, or wrapping gifts. It is a handy tool to have around the shop or house.
This tape is industrial grade, so it is built for heavy use. It holds up in professional woodworking, CNC work, chip bonding, template planing, and panel installation.
XFasten Double Sided Woodworking Tape 1 inch x 36 Yards 3-Pack 324ft 1-inch Core No Residue Woodworking Double Sided Tape Heavy Duty Wood-safe Wood Glue Tape for Router Templates for Woodworking Tools
The XFasten Double Sided Woodworking Tape 1 inch x 36 Yards 3-Pack 324ft 1-inch Core is designed by woodworkers, for woodworkers. This tape gives you a firm hold on your templates and tools without the mess of liquid glues. You need to focus on precision, not cleanup.
The adhesion is just right. It resists 120 psi of shear stress and can handle temperatures up to 230°F. That means it stays put during high-speed CNC routing, even at over 5000 rpm. But its not permanent.
When you are done, the tape removes cleanly. At 0.8 lb per inch of peel strength, it holds veneer, laminate, softwood, and inlay templates firmly. Yet it comes off without residue or delamination. Your surfaces stay safe and clean.
The thickness is optimized for woodworking. At just 7 mils, this double sided tape eliminates gaps between your template and your workpiece. No shifting, no misalignment. You get zero gaps, which is critical for router templates and precision cuts.
The 1-inch width works well for most woodworking tools and jigs.
Ease of use matters too. This tape is 324 feet total across three rolls, so you have plenty for multiple projects. It handles nicely. It wont stick unnecesarily to other surfaces during application. You can position it without fighting the material. That makes it a great choice for quick setups or complex inlay work.
One thing to note. The tape is designed for woodworking specifically.
Juehuodaji 2 Pack Double Sided Woodworking Tape, 1 Inch x 75 Feet Double Sided Tape for Woodworking Residue-Free, Removable Double Sided Masking Tape for Wood Template, Edge Banding, Anchoring
The Juehuodaji 2 Pack Double Sided Woodworking Tape comes in a 1 inch by 75 feet roll, giving you a total of 150 feet to work with. This tape is built for serious holding power. It uses a strong, industrial-grade adhesive on both sides, made specially for woodworking tasks like splicing, machine cutting, and edge banding. You can stick it to wood or metal surfaces, and it holds firm even during long cutting sessions. What makes this tape stand out is how it handles heat.
If you are running a CNC router or doing a lot of sanding, the tape stays put without melting or losing its grip. It is designed for both DIY hand projects and full CNC machine work. Use it for bonding wood pieces, routing templates, or slicing wood sheets. The hold is stable enough to keep your template from shifting, which means cleaner cuts and less waste. This tape is not just for wood. You can use it on plastic, metal, glass, cloth, ceramic, floor, foam, furniture, and even leather.
Need to keep a rug in place? It works. Sticking down a photo frame or a car mat? No problem. It is strong enough for sofa cushions, doormats, and model making too. The double-sided design means you can attach almost anything to almost anything else. The best part is the clean removal. When you are done with your project, just peel the tape off. It comes away without leaving sticky residue or damaging the surface underneath.
SPJRGRS 1 Pack 0.6 Inch x 108 Ft Double Sided Woodworking Tape for CNC Machines Routing Templates Residue-Free & Removable Double Sided Tape for Woodworking Strong Double Sided Tape for Edge Banding
The SPJRGRS 1 Pack 0.6 Inch x 108 Ft Double Sided Woodworking Tape for CNC Machines is built to solve a simple problem: keeping your workpieces exactly where they need to be. This tape uses an industrial-grade adhesive that grips wood, metal, and plastic with serious strength. During high-speed CNC routing or power sawing, your templates and jigs stay locked in place. No shifting, no slipping, even under constant vibration and heavy tool pressure.
It holds solid as a rock, so you can focus on the cut instead of worrying about movement. One of the best things about this tape is how it comes off. It removes cleanly without leaving sticky residue, chipping the wood, or tearing fibers. You don’t need to scrape, sand, or reach for solvents. Just peel it off by hand, and your surface stays pristine. That makes it safe for delicate veneers, finished panels, and fine hardwoods like oak, walnut, maple, and cherry.
For edge banding or working with MDF, this is a real time saver. The tape is also engineered for tough workshop conditions. It resists heat and moisture, so it wont fail during high-speed routing or in humid environments. Ordinary tapes can give up under that kind of stress, but this one holds its grip. The ultra-thin design is another plus. It grips firmly without being too thick, so you avoid alignment issues.
Double Sided Tape For Woodworking Buying Guide
Double sided tape for woodworking provides a temporary, strong hold for jigs. It’s a shop hero you didn’t know you needed. You might be tired of clamps slipping or damaging your workpiece. This tape fixes that. It holds your pieces steady while you cut, sand, or glue, then peels off cleanly. No mess, no fuss. Just a simple hold that works. But not all tapes are teh same. Some leave sticky residue. Others let go mid-cut. Let’s look at what makes a good one.
Adhesive Strength and Residue
The biggest pain point is residue. You want a tape that sticks tight but comes off clean. Look for a high-tack adhesive that releases with a simple twist or pull. Cheaper tapes often leave a gummy mess that ruins your finish. Test a small piece first if you can. Some tapes handle heat from sanding better than others. Pick one that says “clean release” on the package.
Thickness and Conformity
Thickness matters more than you think. Thin tapes are great for flat surfaces and precise jigs. They don’t rock your workpiece. Thicker tapes fill small gaps on uneven wood, but they add a tiny wobble. Ask yourself: are you using this on planed boards or rough lumber? For most projects, a medium thickness around 0.03 inches works best. It hugs curves well too.
Temperature and Moisture Resistance
Workshop conditions change. A hot garage or humid basement can ruin a tape’s grip. Some tapes lose their stick when it’s cold. Others get gooey in the heat. Check the temperature range on the packaging. If you work outdoors or in extreme temps, look for a tape rated for -10°F to 150°F. Moisture is another killer—avoid tapes that aren’t waterproof if you’re working with green wood or glues that create dampness.
Width and Length Options
Wider tape means more holding power. A 1-inch wide tape works for smaller jigs, but 2-inch or 3-inch tape gives you better coverage for larger panels. The lenght of the roll matters too. A 36-yard roll lasts longer and saves money over buying several small rolls. Don’t go too thin on width for heavy projects—it’s a common mistake that leads to accidents.
Pick a tape that matches your project. A strong, clean release tape makes woodworking easier and more accurate. You’ll wonder how you lived without it.
Frequently Asked Questions About Double Sided Tape For Woodworking
What is double sided tape used for in woodworking?
It holds wood pieces together during cutting, sanding, or routing. You can also use it to attach templates or jigs. It stops wood from shifting without clamps.
Will it damage my wood?
Most tapes remove cleanly. But test it on scrap wood first. Use a tape made for woodworking, not general craft tape. Peel it off slowly at a low angle. If residue stays, rub it with mineral oil or a solvent like rubbing alcohol.
How strong is teh hold?
It depends on the tape. Some hold up to 20 pounds per square inch. But the surface matters. Smooth, clean wood gives the best grip. Rough or dusty surfaces reduce hold. Press firmly for 10 seconds when applying.
Can I reuse the tape?
No, you shouldn’t reuse it. It loses stickiness after removal. Always use fresh tape for each project. It’s cheap and gives you reliable hold.
What thickness should I choose?
Thin tape (0.02 to 0.04 inches) works for most tasks. It keeps your workpiece flat. Thicker tape (0.06 inches or more) fills small gaps. Use thick tape for uneven surfaces or when you need extra cushioning.
Does it work with oily woods like teak or rosewood?
It can be tricky. Oily woods resist adhesion. Wipe the wood with acetone or denatured alcohol first. Let it dry completely. Then apply the tape. You might need a stronger tape for these woods.
How do I remove the tape after my project?
Peel it slowly. Heat it with a hairdryer if it sticks to much. Use a plastic scraper to avoid scratches. For stubborn spots, use a citrus-based adhesive remover.
Can I use it with wet wood or outside?
Most tapes aren’t waterproof. They fail when wet. Use a waterproof tape for outdoor projects or damp wood. Check the label for “water-resistant” or “outdoor use.”
Wont the tape leave a sticky mess?
Not if you choose the right tape. Quality woodworking tape leaves little to no residue. Always test on a hidden area first. If you see residue, it means the tape isn’t suited for your wood type.
Quick Recap
Hold parts secure without clamps or screws for a clean glue-up. It’s a simple trick that saves you time and frustration. When you’re joining boards or attaching trim, waitin for glue to dry can test your patience. With teh right tape, you skip the mess of squeeze-out cleanup and avoid denting your workpiece. No more adjusting clamps mid-project or drilling holes you didn’t want. Just stick, press, and let the adhesive do the work. It’s a small change that makes a big diffrence in your workflow.
For your next project, pick up a roll of double sided tape for woodworking. Look for one with strong initial tack and a bond that releases cleanly when you need it to. Use it to hold templates, align joints, or fasten sandpaper to blocks. Keep a roll in your toolbox for those tricky spots where clamps won’t fit. You’ll wonder why you didn’t try it sooner. It’s a practical tool that makes woodworking less stressful and more enjoyable. Give it a shot on your next build.